TCL P525SBC Frost Free Refrigerator Instructions

TCL P525SBC Frost Free Refrigerator Instructions

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
2. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
3. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
4. WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
5. WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
6. WARNING: Do not damage the refrigerant circuit.
7. WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
8. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
9. This appliance is intended to be used in household and similar applications such as
   • Staff kitchen areas in shops, offices and other working environments;
   • Farm houses and by clients in hotels, motels and other residential type environments;
   • Bed and breakfast type environments;
   • Catering and similar non-retail applications.

Safety information

In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. For the safety of life and property keep the precautions of these user’s instructions as the manufacturer is not responsible for damages caused by omission.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given super vision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children unless they are aged from 8 years and above and supervised.
• Keep all packaging well away from children. There is risk of suffocation.
• If you are discarding the appliance pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent playing children to suffer electric shock or to close themselves into it.
• If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lack unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child.

General safety

WARNING! Keep ventilat10n openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

WARNING! Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

WARNING! Do not damage the refrigerant circuit.

**WARNING!** Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances, unless they are approved for this purpose by the manufacture.

• Do not store explosive substances such as aerosol cans with a flam- mable propellant in this appliance.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environme- ntal compatibility, which is nevertheless flammable.
• During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged.
• In case of leakage of any flammable gas such as natural gas, it is necessary to close the leaking valve first and the open windows for ventilation. Do not unplug the refrigerator connector immediately to prevent the risk of fire of explosion due to an electric spark.
• It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short circuit, fire and/ or electric shock. • This appliance is intended to be used in household and similar applications such as
  • staff kitchen areas in shops, offices and other working environments;
  • farm houses and by clients in hotels, motels and other residential type environments; – bed and breakfast type environments;
  • catering and similar non-retail applications.

WARNING! All servicing must be carried out by an authorised service agent in order to not void the warranty.

** WARNING!** Please check the power cord regularly, if the power cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified person

WARNING!
Risk of fire/flammable materials

WARNING! Do not place multiple portable socket outlets (power boards) or power supplies at the rear of the appliance.

Safety information

• Power cord must not be lengthened.
• WARNING! When positioning the appliance ensure the supply cord is not trapped or damaged. A squashed or damaged power plug may overheat and cause a fire.
• Make sure that you have easy access to the mains plug of the appliance.
• Do not pull the mains cable.
• If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.
• This appliance is heavy. Care should be taken when moving it.
• Do not remove nor touch items from the freezer compartment if you hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.
• Avoid prolonged exposure of the appliance to direct sunlight.

Daily use

• Do not put hot items on the plastic parts in the appliance.
• Do not place food products directly against the rear wall.
• Frozen food must not be re-frozen once it has been thawed out. 11
• Store pre-packed frozen food in accordance with the frozen food manufacture·s instructions.11
• Appliance·s manufactures storage recommendations should be strictly adhered to. Refer to relevant instructions.
• Do not place carbonated of fizzy drinks in the freezer compartment as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance.11
• Ice lollies can cause frost burns if consumed straight from the appliance.

Care and cleaning

• Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.
• Do not clean the appliance with metal objects.
• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.1>
• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in te bottom of the appliance.

Installation

Important! For electrical connection carefully follow the instructions given in specific paragraphs.

• Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor.
• Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation follow the instructions relevant to installation.
• Wherever possible the spacers of the product should be against a wall to avoid touching or catching warm parts (compressor, condenser) to prevent possible burn.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.

Service

• Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person.
• This product must be serviced by an authorized Service Center, and only genuine spare parts must be used. Please refer to the warranty card for further information.
• In Queensland Australia the Authorized Service Provider MUST hold a Gas Work Authorization for hydrocarbon refrigerants to carry out servicing or repairs which involve the removal of covers.

Energy saving

• Don’t put hot food in the appliance;
• Don’t pack food close together as this prevents air circulating;
• Make sure food don’t touch the back of the compartment(s);
• If electricity goes off, don’t open the door(s);
• Don’t open the door(s) frequently;
• Don’t keep the door(s) open for too long time;
• Don’t set the thermostat on exceeding cold temperatures;
• Some accessaries, such as drawers, can be removed to get larger storage volume and lower energy consumption.

Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The insulation foam contains flammable gases: the appliance shall be disposed according to the appliance regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially the heat exchanger. The materials used on this appliance marked by the symbol Cl are recyclable.

The symbol on the product or on its packaging indicates that this il product may not be treated as household waste. Instead it – should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

Packaging materials
The materials with the symbol are recyclable. Dispose the packaging in a suitable collection containers to recycle it.

Disposal of the appliance

1. Disconnect the mains plug from the mains socket.
2. Cut off the mains cable and discard it.
3. Remove doors so not to entrap small children

WARNING: RISK OF CHILD ENTRAPMENT

Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigeration products are still dangerous- even if they sit for a “just a few days”. If you are getting rid of your old appliance, please follow the below instructions to help prevent accidents.

Before You Throw Away Your Old Refrigeration Product:

• Take off the doors
• Leave the shelves in place so that children may not easily come inside.

Product introduction

The pictures are for reference only. Please refer to the object

Warm Prompt:
Product specifications subject to change.

Handling and placement

Certain space shall be left around the refrigerator, shown in the figure

Do not trolley the refrigerator from the front or back.

The refrigerator shall be placed in an environment which is dry, has good ventilation, far from direct sunshine and heat source.

The refrigerator shall be placed on a flat and firm surface. If the ground is not flat, adjust the adjusting leg to keep it level.

Never place the refrigerator into a too cold environment that may get frozen.

Do not operate the refrigerator on the foam base it was shipped on. This will help heat dissipation and reduce the risk of fire.

Warm prompt:

• When handling the refrigerator, at least two people are required – one lifts the top rear part, the other one handles the bottom.
• When moving the refrigerator, the lower runner may damage and scratch the floor. If youneed to move the refrigerator for a long distance, the internal accessories must be fixed using adhesive tape. Otherwise, the accessories may get damaged due to crashing into each other.
• Please place the refrigerator in the position with small exposure vibration.
• Sufficient clearance shall be left around the refrigerator. If the clearance is too small or goods are placed on the top or close to the side, the heat dissipation of the refrigerator will be affected, and thus to cause unnecessary electric energy waste as well as burn out of the wall and other goods; the contact between the back and wall will cause vibration and noise;
• Adjust the front part and adjusting leg of the refrigerator to level it. An unleveled refrigerator will cause vibration and noise.

Handling and placement

The outline dimension of the product and the space needed by the use of the product are shown int the following pictures:

Pictures:
Outline dimension of product

Product model| Outline dimension of product| Space needed by the use of product| Total space needed by the use of product
---|---|---|---
L1| W1| L2| W2| L3| W3
P525SBC/P525SBB| 630| 920| >L1+100| >W1+200| >L1+380| >W1+600
P525SBW/P525SBS| 630| 920| >L1+100| >W1+200| >L1+380| >W1+600
P525SBN/P525SBG| 630| 920| >L1+100| >W1+200| >L1+380| >W1+600

Preparations prior to use

1. Remove all packing assemblies such as case fixing tape etc., especially the foam base.

2. Use warm wet cloth to clean both interior and exterior of the refrigerator, (neutral detergent can be added in warm water).

3. After leveling and cleaning the refrigerator, stand it for about 2 hours before plugging the power plug for powering on, and cool the refrigerator for 2 to 3 hours before storing foods.

4. Remove fixing tape
   In hot summer, 24 hours are needed to fully freeze the food. Check the refrigerating condition on the second day.

5. Connect to power

6. Store food after connecting to power for 2-3 hours
   The plastics deodorant will disappear automatically after freezing for a while.

Operation keys

**Operation and diagram of the electronic control panel

**

Powering on for the first time
When it is powered on for the first time, the refrigerator will start the intelligent mode and run at 5 °C for the refrigerator chamber and -18 °C for the freezer chamber.

Child lock function
Turn on: when there is no key operation on the display screen, after 30 seconds, the keyboard is automatically locked and the child lock function is turned on;

Turn off: when the display screen is in the locked state, press the “unlock 3 sec” key and hold it for 3 seconds to unlock, and the child lock function is turned off.

Manual temperature adjustment
When there is no key operation on the display within 30 seconds, the display will go out automatically, and the keyboard will be automatically locked. When the display is off, press the button for the first time to wake up the display; press and hold the “unlock 3 sec” button for 3 seconds to unlock, and then press the button again to make the button function effective.

Refrigerator chamber temperature adjustment (2°C -8°C)
In the unlocked state, repeatedly press the “Zone” button until the refrigerated storage temperature area is lit, and then presses the “Regulate” button to adjust the temperature of the refrigerator chamber. The temperature of the refrigerator chamber should be set between “02”-“03”-“04”-“05”-“06”-“07”-“08”-“02”. Select the appropriate temperature to stop the key operation, and then set the temperature range for confirmation.

Freezer chamber temperature adjustment (-24°C ~-15°C)
In the unlocked state, repeatedly press the “Zone” button until the freeze storage temperature area is lit, and then presses the “Regulate” button to adjust the temperature of the freezer chamber. The temperature of the freezer chamber should be set between “-24”-“-23”-“-22″-” -21″-“-20”-“-19”-“-18”-“-17”-“-16”-“-15” “-24”. Select the appropriate temperature to stop the key operation, and then set the temperature range for confirmation.

Power Cool function
When the refrigerator is under unlock state, press “Function” button repeatedly till the “Power Cool” icon blinks, after that, stop the key operation and wait for 3 seconds to enter refrigerator chamber power cool function. You can quit the power cool function with the same operation. Once entering “Power Cool”, The Refrigerator will automatically quit the power cool function after entering it for 2 hours.

Under “Power Cool” state, the set temperature for the refrigerator chamber is 2 C until quitting the function. Under “Power Cool” state, when setting other functions, you may automatically quit the power cool function. Under “Power Cool” state, you will automatically quit the power cool function when the refrigerating door is opened over 3 minutes. (Under “Power Cool” state, when setting other functions, you may automatically quit the power cool function)

Power Freezing function
When the refrigerator is under unlock state, press “function” button repeatedly until the “Power Freezing” icon blinks, after that, stop the key operation and wait for 3 seconds to enter freezer chamber power freezing function. You can quit the power freezing function with the same operation. Once entering “Power Freezing”, the refrigerator will automatically quit the power freezing function after it is under “Power Freezing” for 4 hours.

Under “Power Freezing” state, the setting temperature for the freezer chamber is displayed by -32°C until quitting the function. Under “Power Freezing”state, when setting other functions, you may automatically quit the power freezing function Under “Power Freezing” state, you will automatically quit the power freezing function when the freezing door is opened over 3 minutes.

(Under “Power Freeze” state, when setting other functions, you may automatically quit the power freezing function)

Holiday function
In the unlocked state, press the “Function” key repeatedly until the “Holiday” icon flashes, stop the key operation and wait for 3 seconds to enter the holiday function. In holiday mode, the position of refrigerator refrigerating chamber shows “OF”, and the refrigerating chamber enters the closed state. (In the “Holiday” state, when other functions are set, the holiday function may be automatically exited) Note: Before activating the holiday function, please take out the food in the refrigerator chamber.

Power off memory
When power goes off, the instantaneous working state at the time of power off will be locked. After power on, it will still work according to the setting before power off.

Door alarm
If the refrigerator or freezer door is not closed tightly or stays open for more than 1 minute, beep issue “Di, Di, Di”. Press any key to pause the alarm; send an alarm again after 1 minute; close the refrigerator or freezer door tightly to stop the alarm.

Over temperature warning of freezer chamber
When the power is switched on, the temperature of the freezer chamber is higher than -12°C, the schematic box corresponding to the temperature zone of the freezer chamber is on, and the digital zone flashes. Press any key to display the temperature of the freezer chamber when it is powered on, press the key again or 10 seconds later, it will return to the normal display state.

Display protection function
If there is no any key operation within 30 seconds, the refrigerator will enter the display protection function, and the keyboard will be automatically locked. In the display protection mode, press any key to exit the display protection function.

Foods storage refrigerator chamber (2°C~8°C)

• The refrigerator chamber is mainly used for storing short-term foods, like milk, eggs and bottled drink.
• Vegetables, melons and fruits shall be put into the fruit and vegetable box to prevent water loss. -The cooked foods shall be put into the refrigerator after packaging with the preservative bags, to prevent the back from frosting and the power from increasing.

freezer chamber (-24°C~-15°C)

• The freezer chamber is used for the foods to be stored for long-term. –Fish and meat to be frozen shall be cut into small pieces, packaged with preservative bags separately and then put into the frozen drawer.
• The glass container or the sealed container filled with liquid shall not be stored in the freezer chamber, to prevent the risk of burst due to freezing. –Fresh foods shall not be stored together with the frozen foods.
• Do not place food close to the inside wall in the freezer to prevent food freezing to the wall.

Warm tips:
The stored food, if any, shall not block the air duct outlet and return port for fear of affecting the refrigerating effect. Before being stored in the refrigerator, hot water and food shall be cooled to room temperature.

Ice-making (Available on selected models)
Fill the ice-making box with 4/5 water and put the box into the freezer chamber. After the water in the box turns into ice, twist the box slightly to separate the ice from the box. However, don’t bend the box.

Disassembly and assembly method of accessory

• Glass shelf in the refrigerating chamber: the height of the shelf is adjustable, which facilitates the storage of articles with different volumes. Pull the shelf outwardly and upwardly in a slight way to take out.

• Fruit and vegetable box: for storing vegetables and fruits. It can be taken out by pulling outwardly.

• Drawer in the freezing chamber: storing foods to be preserved for long-term, such as meat and fish. It can be taken out by pulling outwardly and lifting upwardly.
  Warm tips: It is recommended to cut a large piece of meat up into small pieces before placing in freezer, to avoid difficult cutting after being frozen. The quick-freezing foods shall be distributed uniformly and stored together after being frozen.

• Bottle pedestal at the refrigerating door: storing eggs, various bottled drinks and other sundries. It can be taken out by being lifted up slightly.

Note: Don’t pull out the bottle pedestal at the refrigerating door forcibly during disassembly, to avoid damaging the refrigerator.

Take out by pulling upwardly and outwardly in a slight way

Take out by pulling outwardly and upwardly in a slight way

Care and maintenance

It is suggested to maintain the refrigerator once per month;

• Unplug the power plug to prevent from electric shock;
• Use wet cloth or neutral detergent (cleanser essence) to wipe off the oil contamination and other dirt. Then completely wipe off the detergent.
• Do not use alkaline detergent, soap powder, gasoline and alcohol, talcum powder etc.; otherwise the coats or plastics may be damaged;
• Regularly clean the refrigerator body and clear ground dust to keep the refrigerator clean.

Unplug the refrigerator plug before cleaning

Inspections after maintenance:

1. Whether there is damage to the power cable and plug;
2. Whether there is dust on the power plug;
3. Whether there is abnormal heat on the plug;
4. Whether the socket is loose; 5. Whether the plug is totally inserted.

Note:
If the power line and plug is damaged and dust exists, electric shock or fire may occur;

After unplugging the plug, 5 minutes must pass before re-plugging it;

Do not put your hands under the refrigerator to avoid getting hurt.

Please use neutral detergent

Failure analysis

The following items shall be inspected before occurring failures which require maintenance:

Failures: Refrigerator does not work, The refrigeration effect is poor

Causes:1. Check the connection of power supply. 2. Check whether the refrigerator is exposed to direct sunlight or whether there is heat source nearby. 3. Check whether there is heat dissipation space around refrigerator.

Remedies:1. Connect the power supply. 2. Move the refrigerator to a place without direct sunlight and heat source. 3. Leave sufficient space between refrigerator and wall.

Failures:Foods in refrigerating chamber are frozen
Causes:1. Check whether the setting temperature is too low. 2. Check whether foods with too much water are too close to the rear wall.
Remedies:1. Adequately increase the temperature. 2. Move the foods with too much water to the door side of glass shelf

Failures:There is abnormal sound in refrigerator
Causes:1. Check whether the bottom of refrigerator is stable. 2. Check whether the refrigerator is too close to the wall. 3. Check whether the refrigerator touches other objects.
Remedies:1. Adjust the bottom adjusting leg to stabilize the refrigerator. 2. Leave sufficient space around refrigerator. 3. Remove the obstacles.
Failures: There is abnormal odor in refrigerator
Causes:1. Check whether the foods are sealed for storage. 2. Check whether the refrigerator is clean. 3. Check whether the foods are stored for too long time.
Remedies:1. Seal foods for storage. 2. Regularly clean the refrigerator. 3.Do not store foods for too long time.

Non-failures

Phenomenon: Heat on two sides and spacing part surface between refrigerating chamber and freezing chamber.
Cause: Refrigerator pipes (condenser, anti-fog pipes) are on two sides and front part of refrigerator for heat dissipation and to prevent from condensation. Phenomenon: The door is too tight and not easy to open

Cause: Reopening of the door immediately after closing it is hard because hot air enters the refrigerator and contracts to produce pressure difference. It is easy to open the door after a while. Phenomenon:There is water ripple in refrigerator

Cause: When starting or stopping the compressor, the refrigerant will make such sound; Water produced after defrosting will also make such sound. Phenomenon:There is “Click” sound or tick sound in refrigerator

Cause: Shrinkage and swelling of case will make such sound;When the case is cold or the door is opened, this sound will occur;Phenomenon:There is hum sound in refrigerator

Cause: Running of compressor will make such sound (if the refrigerator is not leveled, this sound will be louder)

Phenomenon: There is condensation or frosting in the freezing chamber door surface or food surface

Cause: Temperature or humidity around the refrigerator is high; The door is opened for too long time; The foods with too much water are not sealed or tightly wrapped

Phenomenon: There is condensation on the built-in light surface

Cause: Light will produce heat after being lit, and the door is opened for too long time. So there is temperature difference, and thus the light case will have condensation.

Phenomenon: There is condensation and water mist on body

Cause: Humidity around refrigerator is high, and the moisture in the air will gather in the case to form condensation

Technical parameter

Packing list

Annex
Refrigerating shelf| 5| 5| 5| 5| 5| 5
Freezer shelf| 5| 5| 5| 5| 5| 5
refrigerator drawer| 2| 2| 2| 2| 2| 2
Ice-making box| 1| 1| 1| 1| 1| 1
Refrigerating door bottle bracket| 4| 4| 4| 4| 4| 4
Freezer door bottle bracket| 4| 4| 4| 4| 4| 4
Freezing drawer| 2| 2| 2| 2| 2| 2
Operating instruction| 1| 1| 1| 1| 1| 1

Costumer Support

TCL Electronics Australia Pty Ltd.
ABN 83 111 032 896
Telephone: 1300 738 149
sales.au@tcl.com
www.tcl.com/au

References

• LED TVs | 4K Ultra HD, Full HD & Android TVs | TCL Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>