Extrraflame 9278451 WiFi Module Instruction Manual
- June 6, 2024
- Extrraflame
Table of Contents
WIFI MODULE BLACK LABEL
APP TOTAL CONTROL 2.0
TOTAL CONTROL 2.0 is an application that allows for remote monitoring and
managing of La Nordica-Extraflame pellet products via smartphone, in the
presence of an Internet connection. Download Total Control 2.0 (Apple Store /
Play Store) and follow the configuration wizard.
TECHNICAL SPECIFICATIONS OF REMOTE WI-FI MODULE
| Frequency | VVi-A (2.4 GHz) |
|---|---|
| Power | 17.6 DBm |
| Dimensions (L x W x H) | 94 X57 X3Omm |
| Weight | 74 g |
| Installation position | Any |
| Protection rating in version with connector | IP 21 |
| Input voltage | 12V DC (via power supply) |
| Consumption | 0.4W |
| Standard serial | TTL |
| Operational ambient temperature | Between 0°C and 50°C |
| Storage temperature | From -10°C / +70°C |
| Maximum relative humidity (without condensate) | 95% |
The Wi-Fi network must not be of the mixed type
The package consists of:
CONNECTION DIAGRAM
THE INSTALLATION MUST BE MADE BY QUALIFIED PERSONNEL AND/OR THE MANUFACTURER’S TECHNICAL SERVICE
LOGIC AND MEANINGS
- Connection with the stove (serial cable)
- Power input
- Configuration reset button
- Green LED – Power
- Blue LED – Access point
- Orange LED – Station
- Orange LED – Cloud
EU DECLARATION
The manufacturer MICRONOVA s.r.l. declares that the following type of radio
equipment NAVEL 2.0 complies with the following directives:
RED 201BNTmcr814/53/EU; ROHS 2011/65/EC; WEEE 2012/19/EU
The complete text of the declaration is available at the following address:
https://www.micronovasrl.com/wp-content/uploads/2016/02/T009_datasheet-
PT009_XX.pdf
- The support power supply (as a sample supplied in the kit) must comply with the EN 60950-1 directive and have the following characteristics:
• SELV Safety Extra-low voltage;
• protected against short circuits and overcurrents;
• Low power source LPS;
CONFIGURATION OF THE EXTERNAL WI-FI MODULE
Connect the module as indicated in the “Connection diagram” chapter, checking
the electrical power supply and the serial connection with the stove. Make
sure that the blue “Access Point” light is on.
If the light is off, reset the module by pressing the “RESET” key for 5
seconds.
When the blue “Access point” LED is on, the module is ready to receive the configuration from the App and creates a temporary Wi-Fi network that the App will use during set-up.
CODES TO USE FOR REGISTRATION
The Wi-Fi module is registered via App using two codes:
- Product code: The article code of the stove to which the module is connected. The product code is usually indicated on a label attached to the stove or on the first pages of the user manual.
- Serial Number: It is necessary to use the serial number of the Wi-Fi module, which can be found on a label attached to the module box or on the back of the module itself.
WI-FI MODULE RESET
To reset the module to its factory settings, press and hold the “RESET” key
for 5 seconds.
The network can be identified by the word MyStove followed by the MACADDRESS,
shown on the QrCode2 label.
DISPOSAL
INFORMATION FOR MANAGEMENT OF ELECTRIC AND ELECTRONIC APPLIANCE WASTE
CONTAINING BATTERIES OR ACCUMULATORS
This symbol, which is used on the product, batteries, accumulators or on the
packaging or documents, means that at the end of its useful life, this
product, the batteries and the accumulators included must not be collected,
recycled or disposed of together with domestic waste.
Improper management of electric or electronic waste or batteries or
accumulators can lead to the leakage of hazardous substances contained in the
product. For the purpose of preventing damage to health or the environment,
users are kindly asked to separate this equipment and/or batteries or
accumulators included from other types of waste and to arrange for disposal by
the municipal waste service It is possible to ask your local dealer to collect
the waste electric or electronic appliance under the conditions and following
the methods provided by national laws transposing the Directive 2012/19/EU.
Separate waste collection and recycling of unused electric and electronic
equipment, batteries, and accumulators helps to save natural resources and to
guarantee that this waste is processed in a manner that is safe for health and
the environment. For more information about how to collect electric and
electronic equipment and appliances, batteries and accumulators, please
contact your local Council or Public Authority competent to issue the relevant
permits.
TROUBLESHOOTING FOR REMOTE WI-FI MODULE
3.| Configuration reset button|
---|---|---
4.| Green LED – Power
5.| Blue LED – Access point
6.| Orange LED – Station
7.| Orange LED – Cloud
LED| STATUS| DESCRIPTION| POSSIBLE PROBLEM
ASSOCIATED| SOLUTION
---|---|---|---|---
Power LED
(green)| Off| The module is not powered.| The module is not working.| Connect
the supplied external power supply.
Flashing| The module starung| |
On| The module has started successfully.| |
Access point LED
(blue)| OH| The module is correctly connected to a VIEFI network| |
On| The itri.Fi module is ready to be confgured to a home Wi.Fi network| |
Station LED
(orange)| Off| The module is not connected to the home Wi-Fi network| No
configuration was made 1/13 App| Download the Total Control 2.0 App and
perform the configuration procedure
Flashing| The module is connecting to the homeWi.Fi network| If this situation
persists for several minutes. there is a problem connecting to the homelVi.Fi
network| Make sure that the home network is present and that its signal is
strong enough. Should it be necessary to reconfigure the product. perform the
reset procedure
On| The module is connected to the home Wi.F1 network| |
Cloud LED
(orange)| OH| The module is not connected to the cloud| |
Flashing| The module connecting to
the cloud| If this situation persists for several minutes. It means that the
module cannot connect to the Exuaflame sener| Check that the home1M.Fi network
has access to the Internet Perform the reset procedure and reconfigures the
module. taking care to use the correct codes.
Flashing with
2 pulses per
second| The module is connected to the cloud but is not communicating
correctly| AN incorrect or unsupported stove article code has been entered.|
Perform the reset procedure and reconfgure the module. taking care to use the
correct codes Make sure that the stove is compatible with the module
at httpsi/www.lanorchca. extra flame corntitiaccessoiv
modulogiFFEetichettanera
Flashing with
3 pulses per
second| The module is connected to the cloud but is not communicating
correctly| Cloud configuration problem| Contact after.sales centre
On| The module is connected to the cloud| |
OTHER
- The 4 LEDs turn on and off in sequence > The firmware is being updated.
- The 4 LEDs flash 3 times simultaneously > The reset has been performed correctly using the relative button.
EXTRAFLAME S.p.A. Via Dell’Artigianato, 12 36030 – MONTECCHIO PRECALCINO (VI)
– ITALY
+39.0445.865911 – +39.0445.865912 –
info@extraflame.it – www.lanordica-
extraflame.com
TO FIND THE SERVICE CENTRE NEAREST TO YOU CONTACT YOUR DEALER OR CONSULT THE
SITE
WWW.LANORDICA-EXTRAFLAME.COM
THE MANUFACTURER RESERVES THE RIGHT TO VARY THE CHARACTERISTICS AND THE DATA REPORTED IN THIS PAMPHLET AT ANY MOMENT AND WITHOUT NOTICE, IN ORDER TO IMPROVE ITS PRODUCTS.
EL FABRICANTE SE RESERVA EL DERECHO A MODIFICAR LAS CARACTERÍSTICAS Y LOS DATOS CONTENIDOS EN EL PRESENTE MANUAL Y SIN PREVIO AVISO, CON EL OBJETIVO DE MEJORAR SUS PRODUCTOS.
004281071-000 MAN.UT.KIT WIFI 2.0 ET.NERA [EXT]
Documents / Resources
|
Extrraflame 9278451 WiFi
Module
[pdf] Instruction Manual
9278451 WiFi Module
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>