REFOX LM-40 Laser Machine User Manual
- June 16, 2024
- REFOX
Table of Contents
REFOX LM-40 Laser Machine User Manual
Product Introduction
LM-40 Mini is a small laser machine, dedicated to the refurbishment of the
rear cover glass of the mobile phone repair industry. This laser machine is
miniaturized, lightweigh, suitable for a variety of scenarios, especially
suitable
for use in repair store in shopping malls.
Product Dimensions
Features
Independently develop marking system
Automatic and real-time diagram updates of massive accurate drawings on the
cloud
One-click accurate focus
Focal le ngth pi ns are highly accurate, intell igent sens e
Sundry usages availability
Can be used in di fferent sceneries with a special a nti-smoke glass cover
Featured high-speed galvanometer
Sup ports multi ple times o f etching 2 -5 times higher than an ordi nary
galvano mete r Precise position function
The professio nal work benc h makes y our eq ui pment p osition ing more
accurate and has a larger operating space
Space-saving size
Small d imensi on an d lightweight structure avo id your desktop from being a
mes s
Parameters
| Product Name | Laser Machine |
|---|---|
| Brand | REFOX |
| Product Model | LM-40 |
| Voltage | 110V/220V |
| Product Power | ≤ 800W |
| Laser Power | LM-40:6W |
| Marking Precision | ≤0.001mm |
| Marking Speed | ≤10000mm/s |
| Cooling Mode | Built-in cold air |
| Efficiency | 5mins/piece |
| Marking Width | 0.05-0.1mm |
| Marking Format | 175mm*175mm |
| Marking Depth | 0.015-0.5mm |
| Repeated Measurement | ≤0.001mm |
| Product Size | 250 x 380 x 550mm |
| Package Size | 52.53561cm |
| Net Weight | 15KG |
| Gross Weight | 22KG |
Steps for Usage
- Connect the power supply and turn on the
- Turn on the computer and install the software that comes with the
- Connect the machine and computer through the USB
- Place the item to be marked on the workbench and adjust the focus using the one-click accurate focus
- Open the software and import the design to be
- Adjust the marking parameters, including marking speed, marking depth, and line width, according to the material and design to be
- Start the marking process by clicking the “marking” button in the
- After the marking is completed, turn off the machine and computer and disconnect the USB
Attention
- Do not modify the protective circuit of the machine and disassemble the main parts of the laser machine at will;
- The laser marking machine is not allowed to run empty without materials;
- If abnormal sound or other conditions occur during operation, turn off the power and examine it
- Each component of the laser marking machine needs to be started step by step according to the description（You will take your own risk if you do not follow the instructions ）
- Keep the working environment clean and tidy;
- eep the lens
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>