AOPUTTRIVER AP-570C App Instructions
- June 6, 2024
- AOPUTTRIVER
Table of Contents
AOPUTTRIVER AP-570C-APP ConnectInstructions
Steps 1： Turn OFF ALL irrelevant Bluetooth signals.（Including Bluetooth
signal from irrelevant phones, speakers, or other devices.
Make sure that only your phone’s Bluetooth signal is ON nearby, otherwise, the
clamp meter will auto-connect with another irrelevant Bluetooth signal.
STEP 2: (Clamp meter stays OFF during step 2)
Turn ON Bluetooth on your phone ➤ Open the APP
STEP 3: (DO NOT enter the system’s Bluetooth connection list to select
the Bluetooth signal, the meter will automatically connect nearby Bluetooth
signals by itself)
Turn on the clamp meter ➤ Wait for about 30 sec for the meter connection to
the phone automatically ➤ “Start” button become green ➤Press “Start” ➤ Ready
to go
Fail? Don’t worry, let’s check:
- Are there other Bluetooth signals turned on except your phone? (Many users have failed to connect due to t this reason.)
- Exit the APP, Turn OFF the meter, Re-proceed the process
- Email us by：AOPVIPSERVICE@163.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>