ALLPOWERS R1500 Portable Power Station User Manual

Portable Power Station
Model:R1500 R1500 Portable Power Station

The products and materials described in this manual will be changed at any time due to technical upgrades.
The company reserves the final right to change and explain the contents of the manual.

Safety Instructions

This product is an power station battery, please make sure to take basic precautions, be sure to take basic precautions including:

1. Be sure to operate the product in a dry and well ventilated place, and if it gets wet, dry it thoroughly before use.
2. To reduce the risk of injury, close monitoring is required when using this product near children.
3. Do not stick your fingers into the product, otherwise it may cause electric shock or other dangers.
4. Do not touch the AC interface with metal, otherwise it may cause electric shock, fire and other dangers.
5. During charging or using the product, do not block the product vents, otherwise it may cause permanent damage to the product.
6. Please do not expose the product to rain and snow.
7. It is forbidden to use this product in the environment of strong static electricity or strong magnetic field.
8. Please use the cable specially designed for the product, the company does not assume any responsibility for the damage caused by the third party equipment.
9. Do not disassemble the product at will. If this product needs service or maintenance, please find a qualified repairer.
10. Improper use, falling or excessive force may cause damage to the product.
11. When disposing of used batteries, please separate batteries of different electrochemical systems.
12. In case of fire, dry powder fire extinguisher can be used or immersed in water.
13. Be sure to keep the product away from fire and heat sources.

Specifications

General Information
Net weight: Approximately 16.7KG(36.8lbs)
Size: : 413312265mm(16.2512.2810.43in)
Battery capacity: 1152Wh (48V 24Ah)
Wi-Fi: Support
Bluetooth: Support
UPS (uninterruptible power supply）: Support
Input Ports
AC Input: (100~120)V~15A Max, (220~240)V~6.8A Max
Solar Input: (12~60)V 13A, 650W Max
Car Charger Input: 12V/24V DC
Output Ports
AC Output: 100-120V/220-240V 1800W Max (Surged 3000W)
USB-A2: 5V 3A,9V 2A,12V 1.5A,36W Max
USB-C2: 5/9/15V 3A, 20V 5A, 200W Max
Car port: 12V 10A,120W Max
Wireless charger2: 30W Max
Battery Info
Battery type: LFP Lithium Iron Phosphate
Protection type: High temperature protection, Low temperature protection,
Over discharge protection, Over charge protection,
Overload protection, Short circuit protection, Over current protection
Environmental Operating Temperature
Charge Temperature: 0°C ~ 40°C (32°F ~ 104°F)
Discharge Temperature: -10°C~40°C(14℉~104℉)
Storage Temperature: -20°C~40°C(-4℉~104℉)recommend：20~30℃
Operating humidity range： 10 – 90%
Certification

User guide

3.1 Product appearance introduction 3.2 Introduction of Display (Touch) Icons

3.3 AC charging
The AC power of this product adopts AP-POWER fast charging technology, and the charging power can be adjusted through the AC charging Fast Mode/Standard Mode/Mute Mode. The maximum input of Fast Mode can reach 1500W ; the maximum input of charging in Standard Mode can reach 1000W; Mute Mode 400W (self- adjusting technology) to achieve mute. The default input power of custom charging is Mute Mode, and the charging power is adjustment needs to be set in the mode switch in the APP, see “3.7 operation guide ” for details.
When the AC input current continues to be abnormally larger than 20A(100-120V), 10A（220-240V） inputcurrent is larger than 15A), set the power station will protect itself, and the overload protector button will automatically pop up. After confirming that the product is not faulty, press the AC overload protector, charging can be resumed. When the AC input current is too high, it may cause the power protection switch to trip. After confirming that the product is not faulty, turn on power protection switch, the product resumes use.
Please use the original standard AC charging cable of the product, ALLPOWERS will not bear any damage caused by the use of other unofficial charging cables bear any responsibility. Please connect directly to the wall power socket. It is not recommended to go through the extension power socket.
At the same time, pay attention to whether the household line can last for 7A (220V-240V) / 15A (100V-120V).If the above conditions are not met, please switch to standard mode or mute mode for charging.* To avoid the powerstation being in a low voltage, please charge it within 24 hours when the power is less than 5%.
3.4 Solar charging
Users can charge the product by connecting solar panels in series as shown in the figure.When using this product for solar panel charging, please connect according to the user manual specifications.
Before connecting the solar panel,please confirm that the output voltage specification of the solar panel is within 60V, the maximum current is 13A, and the maximum charging power is within 650W.
3.5 Smart Extra Battery
This R1500 can use ALLPOWERS Smart Extra Battery for capacity expansion, and can support the superposition of 2 battery packs at most.
When using this product for extra battery connection, please connect it according to the specifications of the user manual.
Please note that in the connection state, the rated maximum output power does not change, only the battery capacity is superimposed.
Please use the connection cable provided by our company for connecting to avoid damage to the product.
Users can connect the power station capacity as shown in the figure below. 3.6 UPS function (uninterruptible power supply)
This product supports UPS (Uninterruptible Power Supply) function. You connect the power grid and the AC input port of this product through the AC charging cable, and the electrical appliance can use the AC output port of this product to work (at this time, the AC power comes from the power grid, not the battery).
When After the power grid is suddenly cut off, this product can automatically switch to the battery power supply mode of this product within 15ms. It is recommended to use only one device during use, and do not use multiple devices at the same time to avoid overload protection of this product. If the power station fails to operate normally or data is lost if the operation is not in accordance with the instructions, our company does not assume the corresponding responsibility. Note: 1.Please turn on the AC output first, and then plug wall outlet, make sure that the UPS icon is on.
When power outage, UPS function will be automatically turned on.
2. To ensure the UPS works, the maximum power of the AC output ports should not exceed 1500W when the mains voltage range is 100~120V; the maximum power of the AC output ports should not exceed 2000W, when the mains voltage range is 220~240V. Otherwise, the mains and the power station will supply power to the devices at the same time until the power station consumes to 5% of the power and turns off the AC output.
Normally When fully charged, the power grid supply directly supplies power to the device.
3.7 APP operation guide
3.7.1 APP download:
Use your mobile phone to scan the QR code below to download and install the APP

https://apps.apple.com/app/id1612734937https://play.google.com/store/apps/details?id=com.allpowers.aipower

3.7.2 Bluetooth connection power station:

1. Confirm that the power station and mobile phone Bluetooth are turned on; The way to turn on Bluetooth. See “4.FAQ: Q10”
2. Click the + icon in the Bluetooth device bar on the mobile APP to enter the Bluetooth connection interface
3. Click Next to scan and search for power station
4. Select the corresponding power station and click to connect
5.  After the connection is successful, AP R1500 V2.0 will be displayed in the Bluetooth device bar

3.7.3 WIFI connection:

1. Click the data on the power station, and click the ALLPOWERS name to pop up the WIFI connection QR code;The way to turn on WIFI. See “4. FAQ: Q10”;
2. Click the ⊕ icon in the WIFI device bar on the mobile APP to enter the WIFI connection interface;
3. Select the portable power station to enter the connection page
4.  Click Scan, scan the QR code on the device to connect and bind the device;
5.  After the binding is successful, the name of the power station and whether the power station is online will be displayed as shown in the figure below.

3.7.4 Mobile APP Operation Instructions

1. Charging power working mode setting: can be set to Fast Mode/Standard Mode/Mute Mode;
2. Operation mode setting, set to power saving mode, you can set the AC or DC off time to 1 hour or 2 hours , 4 hours, 6 hours, the power station working in this mode,AC or DC will be turned off after the set time.

FAQ

Q1. What type of battery does the product use?

This product use high-quality lithium iron phosphate batteries(LFP).

Q2. What devices can R1500 power?

The AC output port of this product has a rated power of 100V-120V 1800W (peak 3000W) or 220V-240V 1800W (peak 3000W), which can supply power to most household appliances. It is recommended that you confirm the power of the electrical appliance and ensure that the sum of the power of all load devices is less than the rated power.

Q3. How to know how long the product can supply power?

The LCD screen of this product will display the battery life, which can be estimated for devices with stable power consumption.

Q4. How to judge the product is charging?

When charging, the LCD screen will display the remaining charging time, and the battery indicator circle outside the battery percentage has a breathing animation effect.

5. How to clean the product?

Wipe this product with a dry, soft, clean cloth or paper towel.

Q6. How to store the product?

When storing, please turn off this product first, and then store in a dry, ventilated place with room temperature. Do not place this product in water nearby. For long-term storage, it is recommended to discharge the battery to 30% and recharge to 60% every three months to prolong the service life of this product.

Q7. Can this product be brought on the plane?

No.

Q8.Can the R2500 be charged while using?

Yes, the product supports simultaneous charging and discharging.

Q9. Is the actual output capacity of the product consistent with the target capacity in the user manual?

The capacity indicated in the user manual is the rated capacity of the battery pack of this product. Since this product has a certain efficiency loss during the charging and discharging process Therefore, the actual output capacity of the product is lower than the capacity specified inthe user manual. and display the input power.

Q10. How to turn on/off the Bluetooth & WIFI of the power station?

Q11. How to turn on/off the beep of the button?

Troubleshooting

The fault code is displayed at the position ⑤ of the display screen, and the related fault type and recovery method are as follows.

recovery
E103| Charging high temperature protection| Stop charging, check the product vent’s is ventilated or not, will automatically recover
after the temperature drops down
E104| Discharge low temperature protection| Automatic recovery after ambient temperature recovery
E105| Discharge high temperature protection| It is recommended to shut down and let it stand for more than 2 hours, and it will automatically recover after the product temperature drops down
E107| Total output (AC+DC) discharge overload| Remove part of the load and turn on the AC manually again
E210| AC discharge overcurrent| Remove the load and turn on the AC manually again
E211| AC discharge overload| Remove the load, turn on the AC manually again, do not use power station for the  devices which exceed the rated output power of the power station
E212| AC discharge short circuit| Remove the load, repair the load circuit and turn the AC manually
E301| MPPT input overvoltage| Remove the solar panel, do not use a solar panel which exceeds the rated voltage range
of power sation to charge the power station
Other faults
= xx xx is
the fault number| Please consult customer service for details

Package Contents

Statement

Before using this product, please read the user manual of this product to ensure correct use after full understanding. If you do not operate this product correctly, you could cause serious injury to yourself or others, or result in product damage and property damage. Once you use this product, you are deemed to have understood, recognized and accepted all terms and content of this document. The user undertakes to be responsible for his own actions and all consequences arising therefrom. ALLPOWERS is not responsible for all losses caused by the user’s failure to use the product in accordance with the User Manual.
In compliance with laws and regulations, the company reserves the right of final interpretation of this document and all related documents of this product.
If it is updated, revised or terminated without prior notice, please visit the ALLPOWERS official website for the latest product information.
This product is not intended for use in applications that require extremely high reliability and safety, such as aerospace equipment, trunk communication equipment, nuclear power control equipment, and medical equipment. Please make a judgment after fully confirming the suitability of this product and this device by yourself. If this product is used in the above equipment or equipment, we will not be held responsible for any personal injury, fire, or malfunction of the equipment or equipment caused by the failure of this product.

Contact us

If you have any questions or need assistance with our products and services,
please email ：support@allpowers.com
Our official website: www.allpowers.com

References

• Allpowers - Best Portable Power Station,Solar Panel & Solar Generator
• ALLPOWERS(オールパワーズ)公式サイト｜安心だから、自由になれる – ALLPOWERS公式サイト

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>