SERAX B7221180 Floor Lamp Earth Instruction Manual

SERAX B7221180 Floor Lamp Earth

Product Information

The Marie Michielssen – Floor Lamp Earth (B7221180) is a stylish and functional floor lamp designed by Marie Michielssen. It features a unique design that adds a touch of elegance to any space. The lamp comes with two E27 bulbs included, with a maximum wattage of 5W and a maximum voltage of 240V. It is classified as Class II, ensuring safety during usage. The lamp has dimensions of 145cm in height, 60cm in width, and 40cm in depth. It operates on a power supply of 220-240V and 50-60Hz.

Mounting Instruction
To mount the Marie Michielssen – Floor Lamp Earth (B7221180), follow the steps below:

1. Step 1
   Take out all the supplied components from the packaging. Ensure that you have the lamp base (A), lampshade (B), and screws (C and D) available.

2. Step 2
   Attach the lampshade (B) to the lamp base (A) using the screws provided. Use screws C and D to adjust the position of the lampshade for stability and horizontal alignment.

3. Step 3
   Once the lampshade is securely attached, connect the lamp to a power supply of 220-240V and 50-60Hz. Ensure that the electrical supply is switched off before installation.

Safety Precautions
Before installing or using the Marie Michielssen – Floor Lamp Earth, please read and follow the safety precautions mentioned below:

1. The installation of the luminaire should be done by authorized and qualified technicians, following the regulations for electrical installation.
2. Maintenance of the luminaire is limited to its surfaces. Avoid moisture contact with terminal connections or voltage control parts.
3. Always switch off the electrical supply before any installation, maintenance, or repair work.
4. Do not install the lamp during rain or expose it to water.
5. Ensure that there is enough separation distance from other objects and sufficient room around the fitting.
6. If unsure, consult a professional who can consider local installation requirements.
7. Make sure clamping screws in electrical connections are adequately tightened, especially for low voltage conductors.
8. When replacing a halogen lamp, allow it to cool for at least 5 minutes before handling.
9. Clean the lamp using a clean, dry cloth or brush. Do not use solvents or abrasives and avoid dampness on electrical components.
10. Refer to all available technical information for proper usage and maintenance.
11. Take note of the symbols indicating the connection of wires: N (Neutral) and L (Live/Earth).
12. If the external flexible cable or cord is damaged, it should be replaced by the manufacturer or a qualified person to prevent hazards.
13. Pay attention to the meaning of symbols, such as indoor use only, protection class, minimum distance between the lamp and illuminated materials/objects, suitable illuminants, wire stripping length, and specified cable for connection.
14. Ensure not to exceed the maximum wattage indicated on the lighting unit.

Specifications

• Bulb type: 2 x E27
• Bulbs included: Yes
• Max. wattage: 5W
• Max. voltage: 240V
• Class: II
• Dimensions: 145cm (height), 60cm (width), 40cm (depth)
• Power supply: 220-240V, 50-60Hz
• Manufacturer: Serax
• Website: www.serax.com
• Address: Veldkant 21, 2550 Kontich, Belgium
• Contact: Tel. +32 3 458 05 82

FAQ

• Can I use higher wattage bulbs with the lamp?
  No, the maximum wattage indicated on the lighting unit should not be exceeded. Using higher wattage bulbs may cause damage to the  lamp or pose a safety risk.

• Is the lamp suitable for outdoor use?
  No, the lamp is designed for indoor use only. It should not be exposed to direct contact with water or installed outdoors.

• Can I use a dimmer with this lamp?
  Yes, the lamp can be used in combination with a dimmer. However, it is important to consult the sales outlet for the correct type of dimmer, especially if using it with 12V fittings.

• How should I clean the lamp?
  Use a clean, dry cloth or brush to clean the lamp. Do not use solvents or abrasives, and avoid dampness on all electrical components.

• What should I do if the external cable or cord is damaged?
  If the external flexible cable or cord of the lamp is damaged, it should be exclusively replaced by the manufacturer or a qualified person to avoid hazards.

Mounting Instruction

Marie Michielssen – Floor Lamp Earth
B7221180

Luminary specs

• TYPE Floor Lamp
• MATERIAL Paper Maché
• COLOUR White
• DIMENSIONS
• L60 x W40 H145 cm
• L23 5/8 x W15 3/4 H57 inch
• DIMMING FUNCTION No
• CABLE LENGTH 1,5m

Bulb type

• 2 x E27
• Bulbs included
• Max. 5W
• Max. 240V
• Class II

Demaions

Package of contents

Supplied Use screw 1, 2, 3, 4 to adjust the position of the lampshade to reach perfect stability and horizontal alignment.

Safety Precautions

Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference.

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior light must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
9. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components.
10. Take account of all available technical information.
11. Take note of the symbols when connecting wires:
    • N = Neutral
    • L = Live
    •  = Earth
12. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
13. Meaning of symbols:
    • For indoor use only, where direct contact with water is impossible
    • Protection class 1: the fitting must be earthed
    • Protection class 2: the fitting is double insulated and does not require earthing
    • Protection class 3: the fitting is low voltage
    • Observe the indicated minimum distance between the lamp and the illuminated materials/objects
    • Only the self-screening halogen illuminants should be used with the luminaire
    • Strip the wire to the indicated length
    • Connect using the specified cable
    • The fixture can be used in combination with a dimmer. Consult the sales outlet for the correct type of dimmer (important in the case of 12V fittings)
    • The maximum wattage indicated in each lighting unit, for example, must not be exceeded
    • This luminaire cannot be disposed together with normal domestic waste in standard rubbish bin, but you have to bring it to a staging area for electrical waste
    • This luminaire was designed to work only with the indicated voltage

WWW.SERAX.COM
Veldkant 21, 2550 Kontich, Belgium – Tel. +32 3 458 05 82

References

• Serax – SERAX

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>