Aiwa AT-X80P True Wireless Earphone User Manual

June 16, 2024
Aiwa

Aiwa - logo AT-X80P
True Wireless Earphones
AIWA Electronics International Co., Ltd.
Explore more at www.int-aiwa.com

Product Schematic Picture

|
---|---
Wireless Headphones| charging case
|
Cotton – Linen Blend Fabric Pouch|  Braided Nylon
Type-C Charging Cable
|
Silicone Ear-Tips| User’s manual

Product Specifications

Model: AT-X80P
BT Version: V5.1
IP Rating: IPX5S
Rated voltage/current: 5V1A
Rated Power: 3mW
Frequency Response: 20H2-20KHz
Battery (Earbuds): 3.7V/30mAh
Battery (charging case): 3.7V/300mAh Supported Profiles: A2DP, AVCTP, AVDTP, AVRCP, HFP, SPP, SMP, ATT, GAP, GATT, RFCOMM, SDP, L2CAP PROFILE
Audio Decoding: AAC, SBC Audio decodes Impedance: 32 +15%
Sensitivity: 104dB +3dB Transmission Distance (Estimated): 10 Meters (No Obstacles) Working Time: 5 Hours (Approx)
Standby Time (Earbuds + Case): 280 Days (Approx)
Charging Time (Earbuds): 1.5 Hours (Approx.)
Charging Time (charging case with Earbuds):
2 Hours (Approx.)
Earbuds Weight: 3g each
Charging Case Weight: 32g

*Charging case holds approximately 2 full earbuds charges.

Schematic diagram of product operation

Aiwa AT X80P True Wireless Earphone - Schematic diagram
1 Aiwa AT X80P True Wireless Earphone -
Schematic diagram 2

Product Instructions for Use

Power ON:
Open the charging box cover and take the earphones out.
The earphones will automatically turn on. Once turned on, the blue light on the earphones will remain illuminated for 2 seconds before entering pairing mode. The red and blue lights will then flash alternately during pairing. Upon successful pairing, the red and blue lights on the main earpiece will flash alternately, while the auxiliary earpiece will have no light effect.

  • Before using it for Lhe first time, make sure the headset is fully charged. *

Power OFF:
Place the (left/right) earphone into the charging box separately, with the green light flashing once to check that the charging is normal. After closing the cover, the earphone
will automatically turn off and begin to charge.
*AT-X80P will power OFF automatically after 3 minutes of disconnection.

Music Control
Play / Pause Click touch sensor once (1)
Next Song Three click right touch sensor(3)
Previous Song Three click left touch sensor(3)
Volume + Double-click the right touch sensor (2)
Volume – Double-click the left touch sensor(2)

Call Control

Answer/Hang up Click touch sensor once (1)
Reject Call Double-click the touch sensor (2)
Voice Assistant Long press the left touch sensor button for 2 seconds (2)
Game Mode on/off Long press the right touch sensor button for 2 seconds (2)

Connecting the Product

Connecting the Product

Aiwa AT X80P True Wireless Earphone - Connecting the Product
1

  1. Turn on Bluetooth (BT) on your mobile device.
  2. Remove the earphones from the charging case and connect to the “AIWA AT-X80P” from your Bluetooth device.
  3. The indicator light on the earbuds will turn off upon a successful connection.

Troubleshooting

L side earbud cannot be linked with R side earbud
Solution: Place the earbuds back into the charging case and close the case.
Re-open the lid after a few seconds. The earbuds should now be linked to each other and are ready to be connected to your mobile device.
If the above solution does not work, please clear the earbuds’ pairing history:

  1. Turn off and disconnect all Bluetooth devices from the earbuds.
  2. Remove ONE (1) earbud from the charging case and click on the touch sensor FOUR (4) times. The red light will flash three times.
  3. Place that earbud back into the charging case.
  4. Repeat this process for the other earbud.
  5. Remove both earbuds from the charging case and wait for them to link to each other before initiating pairing with your Bluetooth device

Battery & Charging

Earbuds low battery
When the earphones have low battery, the red light flashes every 5 seconds and prompts with a ‘Dong Dong’ sound every 20 seconds. Please place the earphones in the charging box to recharge.

Low battery of charging case
When the headphones are placed in the charging box or removed, the orange light on the charging box flashes 4 times, indicating that the charging box has low battery and needs to be charged. Please use a standard charger to charge it.

Aiwa AT X80P True Wireless Earphone - Battery & Charging
1

Place both earbuds back into the charging case.
The charging case indicator light will turn solid green.
Earbuds are fully charged when the charging case indicator light turns off.
*Approximate earbuds charging time: 1.5 hours.

Aiwa AT X80P True Wireless Earphone - Battery & Charging
2

While charging: Orange light flashes.
Full charge: Solid green light.
Unplug the charging cable: The charging box indicator light turns off. Approximate charging case charging time: 1.5 hours.

Aiwa - logo

AIWA Electronics International Co., Ltd.
Explore more at www.int-aiwa.comhttps://www.int- aiwa.com/download.php

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Aiwa User Manuals

Related Manuals