QAZQA 44191 Banker TL Bronze Green Lamp Light Instruction Manual

: June 16, 2024
: QAZQA

Table of Contents

QAZQA 44191 Banker TL Bronze Green Lamp Light
Product Information
Product Usage Instructions
FAQ (Frequently Asked Questions)
Safety Precautions
DIMENSION
SAFETY INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QAZQA 44191 Banker TL Bronze Green Lamp Light

Product Information

Specifications

Model: Banker TL Bronze Green 44191
Input Voltage: 220-240V~
Frequency: 50Hz
Maximum Power: 60W

Product Usage Instructions

Installation

Unpack the product and ensure all the components are included.
Select a suitable location for the lamp.
Ensure the power source matches the input voltage specified (220-240V~).
Connect the lamp to the power source using a compatible plug or wiring.
Make sure the lamp is securely mounted or placed on a stable surface.

Powering On/Off
To turn on the lamp:

Ensure the lamp is connected to a power source.
Locate the power switch/button on the lamp.
Press or toggle the power switch/button to the “On” position.

To turn off the lamp:

Locate the power switch/button on the lamp.
Press or toggle the power switch/button to the “Off” position.
Disconnect the lamp from the power source, if desired.

Adjusting the Lamp
The Banker TL Bronze Green 44191 lamp allows for adjustable positioning. Follow these steps to adjust the lamp:

Gently hold the lampshade or lamp arm.
Rotate or tilt the lampshade/arm to the desired position.
Release the lampshade/arm to lock it in place.

Changing the Light Bulb

When the light bulb needs to be replaced, follow these steps:

Make sure the lamp is turned off and disconnected from the power source.
Allow the bulb to cool down, if necessary.
Remove the lampshade, if applicable, by unscrewing or releasing any fasteners.
Unscrew the old light bulb from the socket in a counterclockwise direction.
Replace it with a new light bulb of the same wattage or compatible type.
Screw the new light bulb in a clockwise direction until securely fitted.
Reattach the lampshade, if applicable, by screwing it back or securing any fasteners.

FAQ (Frequently Asked Questions)

Q: How do I clean the lamp?
A: To clean the lamp, first, make sure it is turned off and disconnected from the power source. Use a soft, dry cloth to wipe away any dust or debris from the lampshade and base. Avoid using abrasive cleaners or solvents that may damage the surface.

Q: Can I use a higher-wattage bulb?
A: No, it is not recommended to use a higher wattage bulb than the maximum specified (60W). Using a higher-wattage bulb may cause overheating and potentially damage the lamp or create a safety hazard.

Q: Can I adjust the lamp height?
A: The Banker TL Bronze Green 44191 lamp does not have an adjustable height feature. The lamp is designed with a fixed height.

Q: Is the lamp suitable for outdoor use?
A: No, this lamp is designed for indoor use only. Using it outdoors may expose it to moisture, extreme temperatures, and other conditions that can damage the lamp and pose safety risks.

Safety Precautions

DIMENSION

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference

The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
The electrical supply must be switched off at the outset, preferably using a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
Exterior lighting must not be installed during rain.
Take account of the minimal separation distance from other objects and the room required around the fitting. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
Take account of all available technical information.
Meaning of symbols:
This is can, but you be is brind it her in remedy electric aste in standard
Take note of the symbols when connecting wires: