QAZQA 103134 Athens Opal Modern Ceiling Lamp Light Instruction Manual

QAZQA 103134 Athens Opal Modern Ceiling Lamp Light

Product Information

Specifications

• Power Supply: 220-240V~ 50Hz
• IP Rating: IP20
• Product Model: Athens CL
• Available Variants: A, B, C
• Suitable Light Source: G9, Halogen Max 28W
• Product Codes: Athens CL 4 103120 / 103132 / 103144, Athens CL 8 103121 / 103133 / 103145, Athens CL 6 103122 / 103134 / 103146 / 105244 / 105250
• Dimensions (Athens CL 4): 52.5cm
• Dimensions (Athens CL 8): 30cm (width) x 66.5cm (height)
• Dimensions (Athens CL 6): 52cm (width) x 45cm (height) x 97cm (length)
• Shade Type: Glass shade or net wire shade

Safety Instructions

Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference.

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance, or repair work is undertaken.
4. Exterior lighting must not be installed during rain.

FAQ

• Q: Can I install the luminaires myself?
  • A: The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
• Q: Can I clean the luminaires with solvents or abrasives?
  • A: No, clean with a clean, dry cloth or brush. Do not use solvents or abrasives.
• Q: Can the luminaire be used outdoors?
  • A: No, exterior lighting must not be installed during rain.
• Q: Can I use any type of light source with the luminaire?
  • A: No, please refer to the user manual for the suitable light source. Different items require different types of light sources with different bulb icons.
• Q: Can I dim the luminaire?
  • A: Yes, the luminaire can be used in combination with a dimmer or dimmed by a wall switch.
• Q: How should I dispose of the luminaire?
  • A: This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can. You have to bring it to a staging area for electrical waste.
• Q: What is the warranty period for this product?
  • A: Please refer to the warranty information provided by the manufacturer.
• Q: What is the maximum wattage for the halogen lamp?
  • A: The maximum wattage for the halogen lamp is 28W.

Symbols

Installation Instructions

Athens CL

Dimensions

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product.
Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control par ts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
9. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
10. Take account of all available technical information.
11. Take note of the symbols when connecting wires:
    • N =Neutral L =Live =Earth
12. Meaning of symbols:
    • For indoor use only, where direct contact with water is impossible
    • This icon indicates the level of water-proof and dust-proof
    • Protection Class I: the fitting must be earthed
    • Protection Class II: the fitting is doubled insulated and does not require earthing
    • Protection Class III: the fitting is low voltage
    • Minimum distance from lighted objects (meters)
    • Only the self-shielded halogen lamp should be used with the luminaire
    • Strip the wire to the indicated length (mm);different items require different length
    • Connect using the specified cable; different items require different cables
    • The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
    • The armature is designed to work only with the indicated voltage. Different items require different working voltage.
    • The luminaire can be used in combination with a dimmer
    • The luminaire can be dimmed by wall switch
    • The reference light angle and light space of the luminaire
    • This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste

FittinQ B.V.

• Smaragdweg 52, 5527 LB Hapert, The Netherlands
• www.qazqa.nl

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>