INTEX 68307EP Explorer K2 Inflatable Kayak Set Instructions

INTEX 68307EP Explorer K2 Inflatable Kayak Set Instructions

FAQ

Can I mount an outboard motor onto my INTEX boat, if so what size motor is

recommended? Does INTEX recommend any specific brand?

It depends on the model and year of the boat. Check your owner's manual and your boat to see if the motor mount fittings are present. INTEX supplies the transom mount trolling motor(Item #68631/E)for Challenger 3, Seahawk 2,3,4,Excursion 3,4,5,Seahawk II and Mariners boats. We do not recommend any specific brand of motor since we do not distribute them(Reference trolling motor). Please consult your local marine dealer for suggestions. However, INTEX does recommend that the outboard motor that is used (electric or gas) not exceed specification on the attached file. Boat Motor

What can I do if my boat is leaking air?

Other than a motor mount kit is there any other way to mount a motor to

Intex boats?

No, the motor mount kit is made specifically for Intex boats.

To register my boat, I was told that I would need a Certificate of Origin.

Where do I get the document? (For U.S/Canada customer only)

Before obtaining the Certificate, please have the boat Hull Identification Number (you may find it at the bottom of the capacity label on the stern of the boat) and model name ready, and then click the following link to obtain your Certificate of Origin. obtain your Certificate of Origin

References

• INTEX: The leader in Above Ground Swimming Pools, Air Mattresses and Inflatable Spas
• Boat Certificates. IntexCorp.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>