DIGITAL WATCHDOG DWC-XPZAWM Wall Mount Bracket User Guide
- June 16, 2024
- DIGITAL WATCHDOG
Table of Contents
DIGITAL WATCHDOG DWC-XPZAWM Wall Mount Bracket
Product Information
Specifications:
- Model: DWC-XPZAWM
- Included Items:
- 1x Machine Screw, HM3 x 8 (Adapter Screw)
- 1x Silicon Cap (30 x 11mm)
- 1x O-Type Waterproof Ring (1.5 x 2mm)
- 1x Waterproof Mounting Pad (167 x 122 x 41.5mm)
- 4x Tapping Mounting Screws
- 1x Quick Setup Guide
Product Usage Instructions
Installation:
- Mark the desired locations for the holes on the mounting surface using the mounting bracket as a guide.
- Drill the necessary holes on the marked locations.
- Secure the mounting bracket to the mounting surface using the included tapping screws.
Additional Support:
To access additional support materials and tools, follow these steps:
- Go to http://www.digital-watchdog.com/resources
- In the “Search by Product” search bar, enter the part number of your product.
- Click “Search”.
- All supported materials, including manuals and quick start guides (QSGs), will be displayed in the search results.
FAQ
-
Q: Can I use this wall mount bracket with any camera model?
A: No, this wall mount bracket is specifically designed for use with DWC-XPZA cameras. -
Q: Can I use my screws for installation?
A: It is recommended to use the tapping screws included with the wall mount bracket for secure installation. -
Q: Is the mounting pad waterproof?
A: Yes, the included waterproof mounting pad protects against water damage.
WHAT’S IN THE BOX
- 1x Machine Screw, HM3 x 8 (Adapter Screw)
- 1x Silicon Cap (30 x 11mm)
- 1x O-Type Waterproof Ring (1.5 x 2mm)
- 1x Waterproof Mounting Pad (167 x 122 x 41.5mm)
- 4x Tapping Mounting Screws
- 1x Quick Setup Guide
NOTE: Download all your support materials and tools in one place.
- Go to: http://www.digital-watchdog.com/resources
- Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
- Click ‘Search’. All supported materials, including manuals and quick start guide (QSGs) will appear in the results.
INSTALLATION
- Mark and drill the necessary holes on the mounting surface using the mounting bracket itself.
- Secure the mounting bracket to the mounting surface using the tapping screws included with the mount. Use the waterproof mounting pad between the bracket’s arm and the mounting surface as needed.
- Attach the bracket adapter included with the camera to the wall mount. Use the machine screw included with the mount to secure the adapter to the mounting bracket. Place the O ring between the wall mount and camera adapter to prevent moisture accessing the camera.
- Secure the camera to the wall mount with the safety wire included with the camera.
- Pass wires through and make all necessary connections. If you are running the cables from the wall behind the mount, use the silicon cap to seal the pipe at the bottom of the mount.
- Secure the camera to the adapter using the screws included with the camera to complete the installation.
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
Tel: +1 866-446-3595 /
813-888-9555
Technical Support Hours: 9:00 AM – 8:00 PM EST, Monday through Friday
digital-watchdog.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>