etac 8030 Supporting Leg Loo Fixed Instruction Manual
- June 16, 2024
- Etac
Table of Contents
etac 8030 Supporting Leg Loo Fixed
Product Information
Specifications
- Model Number: 8030 1603
- Product Weight: 75360.7 grams
- Assembly Date: 2022-08-09
Product Usage Instructions
Step 1: Unpacking
Remove all components from the packaging and ensure that all parts are included.
Step 2: Component Identification
Identify the following components:
- x2 – Component 1
- x1 – Component 2
- x1 – Component 3
- x2 – Component 4
Step 3: Adjusting the Size
Measure the desired size for the product. The maximum length should be 46 cm and the minimum length should be 40 cm.
Step 4: Assembling Component 1 and Component 2
Attach Component 1 to Component 2 using the provided screws.
Tighten the screws with a maximum torque of 1 Nm.
Step 5: Attaching Component 3
Take Component 3 and securely attach it to the assembled Component 1 and Component 2.
Step 6: Installing Component 4
Attach Component 4 to the assembled components using the provided screws. Ensure that it is securely fastened.
Step 7: Final Check
Double-check all connections and ensure that all components are properly assembled and tightened.
Step 8: Watch the Instructional Video
For additional assistance, refer to the provided instructional video with the code 200 441.
Step 9: Review the Manual
Refer to the user manual for any additional information or troubleshooting tips.
Frequently Asked Questions
Q: What is the maximum length of the product?
A: The maximum length of the product is 46 cm.
Q: What is the minimum length of the product?
A: The minimum length of the product is 40 cm.
Q: What is the torque specification for tightening the screws?
A: The maximum torque for tightening the screws is 1 Nm.
REF
8030 1603
CONTENTS
Assembly instructions
Etac Supply Center AB
Langgatan 12
SE-334 33 Anderstorp
www.etac.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>