HONGTIANTAI CP2-001 CD Player User Manual

HONGTIANTAI CP2-001 CD Player

Product Information

CD Player CP2-001

Specifications

• Name: CD Player
• Model: CP2
• Supported type: CD/CD-R/CD-RW/MP3
• Disc size: 12CM or 8CM
• ASP cache: 2M SDRAM
• Connection mode: Bluetooth/3.5mm phones
• Bluetooth version: 5.1
• Distance of Bluetooth: About 10~20M
• Lithium battery: 1800mAh
• Charge Port: USB Type-C
• Charging time: About 3 hours
• Playback duration: About 6 hours
• Operating temperature: 0~40°C
• Storage temperature: -5~60°C
• Dimensions: 144mm22527mm
• Weight: 443g

Safety Precautions
Please read carefully and follow the notes for optimal use of the CD Player.

Startup Procedures

Tips:

• Functional buttons will be unavailable when the HOLD button is set to the HOLD position, and available when the HOLD button is set to the UNHOLD position.
• The CD player will turn off automatically if there is no disk after powering on or after stopping for 3 minutes without any operation.
• Do not apply any disc with serious scratches, fingerprints, and dirt on surfaces; otherwise, discs cannot be played, the CD player may fail, or the service life of the laser head may be affected.

1. Open the upper cover.

2. Put in a disc.

3. HOLD to unlock: the HOLD key is placed at UNHOLD.

4. PressPower on/Play/Pause briefly to turn on
   the machine.

5. PressVolume- orVolume+ to adjust the volume.

Name of each part

1. Previous/FR
2. Power on/Play/Pause
3. Next/FF
4. Stop/Power off
5. Bluetooth on/off
6. Volume-
7. Volume+
8. 3.5mm PHONES
9. Bluetooth indicator lamp
10. OPEN
11. Cyclic function
12. Key HOLD
13. Lyrics frame1201202mm
14. Support screw hole
15. USB-C Port
16. Charging indicator lamp

Common Troubleshooting Solutions

Turn the HOLD button to the UNHOLD position.
Failure to read disc| Check the disc for serious scratches, cracks, fingerprints,
dirt, etc.| Use a new or clean disc.
Check whether the disc format is supported by the CD player.
Use a disc supported by the CD player.
No sound| The headphone is not properly plugged into the headphone
jack.| Replug or replace the headphones.
Check whether the volume of the CD player is turned up.
Replace the USB cable.
Failure to charge| The USB port or USB cable port is faulty.| Replace the USB cable.
Failure to connect Bluetooth device| The device to be connected is in the Bluetooth pairing
mode.
The device to be connected is beyond the supported distance of
Bluetooth.| Enable the Bluetooth mode of the CD player and device to be
connected.
Reduce the distance and reconnect.
Button failure| Check whether the HOLD button is in the HOLD position.| Turn the HOLD button to the UNHOLD position.
Playback stop or automatic song skipping| Check whether the ALL mode is enabled.
Check whether the disc is clean without scratches.| If this mode is not enabled, the CD player will stop working or
skip songs.
Replace the disc.

Dear Users:
Thank you for choosing and using our portable CD player. Please read this manual carefully and keep it safe for a better experience. We wish you a happy use.

Safety Precautions

Please read carefully and follow the notes for optimal use of the CD Player.

• Do not put heavy objects on top of the CD Player and protect it from impact.
• Do not place CD Players close to strong magnetic fields or electric fields.
• Do not expose the battery to flame or extreme heat.
• Do not play at high volumes to protect hearing.
• Do not expose the CD Player to excessive dust or sand, moisture, rain, or mechanical shock.
• Do not use ethyl alcohol or benzene solvent to clean, instead, use slightly damp fabric.
• Do not use headphones or a car player when driving, cycling, or using any motorized vehicle.
• Do not take apart, attempt repair or modify the equipment yourself. HOTT will not be responsible for damages resulting from these behaviours.
• Do not improperly discard the package, battery and the electronic equipment.

Startup Procedures

Tips:

• Functional buttons will be unavailable when the HOLD button is set to the HOLD position, and available when the HOLD button is set to the UNHOLD position.
• The CD player will turn off automatically if there is no disk after powering on or after stopping for 3 minutes without any operation.
• Do not apply any disc with serious scratches, fingerprints and dirt on surfaces; otherwise, discs cannot be played, the CD player may fail, or the service life of the laser head may be affected.

1. Open the upper cover.
2. Put in a disc
3. HOLD to unlock: the HOLD key is placed at UNHOLD.
4. Press briefly to turn on the machine.
5. Press to adjust the volume.

Name of each part

1. Previous/FR
2. Power on/Play/Pause
3. Next/FF
4. Stop/Power off
5. Bluetooth on/off
6. Volume-
7. Volume+
8. 3.5mm PHONES
9. Bluetooth indicator lamp
10. OPEN
11. Cyclic function
12. Key HOLD
13. Lyrics frame (1201202mm)
14. Support screw hole
15. USB-C Port
16. Charging indicator lamp

Parameters

Common troubleshooting solutions

Failure in startup

| Check whether the HOLD button is in the HOLD position.| Turn the HOLD button to the HOLD position.

The product cannot be started due to low power.

| Charge it with the supplied USB cable (adapter output: 5V1A).

Failure to read the disc

| Check the disc for serious scratches, cracks, fingerprints, dirt, etc.| Use a new or clean disc.
Check whether the disc format is supported by the CD player.| Use a disc supported by the CD player.

No sound

| ****

The headphone is not properly plugged into

| Replug or replace the headphones.
Check whether the volume of the CD| Increase the volume by pressing
Failure to charge| The USB port or USB cable port is faulty.| Replace the USB cable.

Failure to connect Bluetooth device

| ****

The device to be connected is in the Bluetooth pairing mode.

| Enable the Bluetooth modes of the CD player and device to be

The device to be connected is beyond the

| Reduce the distance and reconnect

Button failure

| Check whether the HOLD button is in the HOLD position.| Turn the HOLD button to the HOLD position.
Playback stop or automatic| ****

Check whether the ALL mode is enabled.

| If this mode is not enabled,

the CD player will stop working or

Song skipping| Check whether the disc is clean without scratches.| Replace the disc.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the Consult the dealer or an experienced radio/TV technician for help.

RF warning statement
The device has been evaluated to meet general RF exposure requirements, The device can be used in portable exposure conditions without restriction.

Warranty Card

The above information is filled in by the maintenance personnel.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>