Jinier Technology JNE-23 TWS Bluetooth Earphones Instructions

June 16, 2024
Jinier Technology

Jinier Technology JNE-23 TWS Bluetooth Earphones

Please read this manual carefully before use

Operation instructions

  • Model: JNE-23
  • Earphone battery capacity: 25mAh
  • Horn: F13 copper ring
  • Charging box battery capacity: 200mAh
  1. Power on : Long press for 3 seconds
  2. Shutdown: Press and hold for 5 seconds
  3. Main and auxiliary ear pairing: Pick up and turn on the device, and it will automatically pair
  4. Pairing successful: Pairing successful with both ears. The auxiliary unit light goes off, and the main unit light flashes twice
  5. Bluetooth disconnection: The phone actively disconnects the connection
  6. Play/pause music: Touch to pause/play
  7. Previous song: Double click on the previous song in the left ear
  8. Next track: Double click on the right ear to go to the next track
  9. Call mode: two-way mode
  10. Answer call: Touch to answer the call
  11. Hanging up the phone: Touch to hang up the phone
  12. Wake up voice assistant: Short touch for 2-3 seconds to wake up Siri
  13. Reject : Press and hold for 3 seconds to reject incoming calls
  14. Low battery prompt: Low battery (voice prompt)
  15. Charging: The red light remains on, the charging is complete, and the earphone is fully charged with the light off
  16. No connection/phone disconnected Bluetooth: automatically shut down after 3 minutes
  17. Charging status: The charging light for the charging compartment flashes, the red light for charging the headphones remains on, and the fully charged light goes off
  18. Automatic reconnection: After the machine is shut down and restarted, BT will automatically reconnect
  19. Automatic shutdown during charging: In playback mode, charging will automatically shut down

TIPS

  1. Before using the earphones, Qingzai should use Mingjing to keep them properly for future reference
  2. Before using headphones for the first time, they must be fully charged
  3. If the earphones are set for more than 30 days, please charge them regularly
  4. Clear use of chargers from qualified manufacturers
  5. If the phone cannot access the Bluetooth earphones, check if the earphones are compatible. If long time missed, headphones will exit pairing mode

WARNING

  1. Do not remove or modify your headphones for any reason to avoid any damage or danger.
  2. Do not store headphones in extreme temperatures (normal storage temperature:”-5 to 45 “degrees Fahrenheit)
  3. Avoid placing indicator lights near the eyes of children or animals.
  4. Avoid using headphones during thunderstorms to avoid confusion in their functionality and the risk of electric shock.
  5. Do not use irritating chemicals or strong cleansers to clean headphones.
  6. Keep headphones and charging case dry.

FCC Caution:

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur 1n a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals