U-LINE UHRI124-IS01A 24 Inch Counter Depth Compact Refrigerator User Manual
- June 16, 2024
- U-Line
Table of Contents
U-LINE UHRI124-IS01A 24 Inch Counter Depth Compact Refrigerator
WELCOME TO U-LINE
Congratulations on your U-Line purchase! Your product comes from a company
with decades of premium modular ice-making, refrigeration, and wine-
preservation experience. U-Line creates products focused on functionality,
style, and inspired innovations — paying close attention to even the smallest
details. Applications include residential, outdoor, ADA height-compliant,
marine, and commercial. Product categories include Beverage Centers, Wine
Refrigerators, Ice Machines, Refrigerators, Freezers, and Dispensers. Our
advanced refrigeration systems, large and flexible capacities, and clean
integrated look are what make our products Built-In to Stand Out®. Since 2014,
U-Line has been part of the Middleby family of brands. Products are designed,
engineered, and assembled in Milwaukee, Wisconsin, USA, and select products
are available worldwide.
U-Line — RIGHT PRODUCT. RIGHT PLACE. RIGHT TEMPERATURE.®
PRODUCT INFORMATION
Looking for additional information on your product? User Guides, Spec Sheets,
CAD Drawings, and Product Warranty information are available digitally on
u-line.com.
PROPERTY DAMAGE / INJURY CONCERNS
In the unlikely event property damage or personal injury is suspected related
to a U-Line product, please take the following steps:
- U-Line Customer Care must be contacted immediately at +1.414.354.0300.
- Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.
GENERAL INQUIRIES
- U-Line Corporation
- 8900 N. 55th Street
- Milwaukee, Wisconsin 53223 USA Monday – Friday 8:00 am to 4:30 pm CST T: +1.414.354.0300
- Email: [email protected] u-line.com
CONNECT WITH US
SERVICE & PARTS ASSISTANCE
Monday – Friday 8:00 am to 4:30 pm CST T: +1.414.354.0300 Service Email:
[email protected] Parts Email:
[email protected] Designed, engineered
and assembled in WI, USA
Integrated Panel Dimensions
INTEGRATED PANEL
NOTICE
- Due to differences in surrounding cabinetry, the panel may not perfectly align with the door. The procedure below is designed to provide a finished integrated panel that seamlessly integrates with surrounding cabinetry.
- The door panel must not weigh more than 20 lbs (10 kg).
- It is important to ensure that all drilled holes are drilled to the correct depth to avoid splits in the wood when the hardware is installed.
- When applying an integrated panel to a unit, ensure that both sides are finished to prevent warping. In some panel installations, the panel may be visible through the glass while the door is open.
- A full integrated door panel completely covers the door frame and provides a built-in appearance.
Integrated Panel Preparation
- Cut the panels to the dimensions listed in the diagram below.
- Optional: Stain or Finish panel to desired stain or color. Be sure to closely follow the instructions provided by the manufacturer.
- Optional: Install handles and hardware.
Integrated Panel Dimensions
Integrated Panel Installation
-
Fully open door/drawer.
-
Starting at a corner, pull the gasket away from the door/ drawer.
-
Continue to pull the gasket free from the gasket channel.
-
Upon removal, lay the gasket down on a flat surface.
-
Partially loosen the 3 screws, securing the top hinge to the cabinet.
-
Align the panel with the outside edge (opposite the hinge) and high enough to align with the highest point in the door/drawer.
-
Insert the panel underneath the top hinge and apply upward pressure while bringing the lower portion of the panel flush to the door inside the lower hinge. The panel will fit snuggly
-
Align door with cabinet. Tighten the top 3 screws, securing the top hinge to the cabinet.
Align the Top Of Panel With the Highest Point Of the Door/Drawer
NOTICE
Due to differences in floor construction or surrounding cabinetry, the panel may not sit flush with the top of the door/drawer.
-
Secure integrated panel to door/drawer using clamps. A robust tape may also be used. U-Line recommends the use of bar clamps to secure the panel to the door/drawer. If using tape, be certain the tape will not damage panel finish upon removal.
-
Using a 7/64″ (3 mm) drill bit, drill 6 pilot holes into the wood panel 1/2″ (12 mm) deep using the holes in the door/drawer frame as a guide.
NOTICE It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardwood is installed. -
Locate 6 of the #6x 1-1/4″ (32 mm) screws provided with your unit.
-
Using a Phillips screwdriver, place one screw into each of the 6 pilot holes and screw down. Do not overtighten screws.
-
Be sure the screws force their way past the opening on the gasket channel and sit flush against the bottom of the channel.
-
Remove clamps from the door/drawer.
NOTICE
If the panel requires additional adjustment after removing the clamps, slightly loosen each screw and adjust the panel as necessary. Tighten screws upon completion. -
Starting at the corners, re-install the gasket into the gasket channel in the frame. Make sure the gasket is fully seated. This may take some force.
Grille Installation
REMOVING AND INSTALLING GRILLE
WARNING
- Disconnect electric power to the unit before removing the grille.
- When using the unit, the grille must be installed.
WARNING
- DO NOT touch the condenser fins. The condenser fins are SHARP and can be easily damaged.
- Removing the grille
- Disconnect power to the unit.
- Loosen the two screws (1).
- Remove grille (2) from unit.
Installing the grille
-
Align cabinet and grille holes and secure, but do not over-tighten grille screws (1).
Note: When installing next to a 15” wide U-Line product, use the supplied spacers behind the grille. The 24” grille will now be on the same plane as the 15” grille. -
Reconnect power to the unit.