BUPOFYT MS-R20-A Digital Coffee Scale User Guide

BUPOFYT MS-R20-A Digital Coffee Scale

GETTING TO KNOW THE PRODUCT

Please familiarize yourself with the device before use

• WEIGHING RANGE: 0.3~2200g

• POWER SUPPLY: 1200mAh, built-in lithium battery

• CHARGING INDICATOR: 4-level power indicator

• APPLICATION SCENARIOS: Three optional modes (Normal Manual Timing mode, Espresso Auto Timing mode and Brewing Auto Timing mode)

• TWO-BUTTON OPERATION
  USB PORT: TYPE C

• PROMPT SOUND: With memory function

When this pattern appears after switching on, double click on “M” immediately to switch the beep on/off.

key beep and full score sound. Alarm when timer reaches maximum time.

1. Weighing area, please place the weighing items you need in the center
2. Function button: When the power is on, press once to start timing. During timing, press to pause timing. Press and hold for 3 seconds to stop timing. In normal mode, press and hold for 3 seconds to calibrate the 100g scale. When pressed and held for 3 seconds, “cal” is displayed. Press the button again to display 100 and flash. At this point, place the weight on the scale and begin calibration. Complete when “pass” is displayed.
3. Display area description: HD LED display
4. When the instrument is off, press this button to start the instrument. If the machine is on, press this button once to tare. Double click to enter the automatic espresso mode. Double click again to enter the automatic brewing mode. Press and hold for 3 seconds to shut down in Power On mode. Click to reset and restart in automatic espresso and brew auto timing modes.
5. Charging Socket (Type C)

A/ Time display range – Maximum display 9 minutes 59 seconds
B/ Weighing display range – Display the weight of the object
C/ Unit display area – Independent display of 1 type of unit: g
D/ Espresso Auto Timing Mode and Brewing Auto Timing Mode indicator- Flashing is Espresso Auto Timing mode and long light is Brewing Auto Timing mode.
E/ Charging and battery indicator – four levels of accurate power indicator, flashes when charging

INSTRUCTION MANUAL

1. To ensure that the product has a normal power level, please connect the product to the power source and charge it once before use.
2. If the power indicator does not change, please unplug the power cord. Please do not charge for a long time.
3. For best results, please place the product on a flat hard surface.
4. The use environment requires no vibration, strong magnetic interference and places where there is wind blowing

BOOT UP

Touch the on/off button to activate

Enter Normal Manual Timing After Zero.

NORMAL MANUAL TIMING MODE

Place the equipment in sequence on the weighing platform, soak the coffee filter paper completely, then press the on/off button for tare.

Add the ground coffee and check the weight of the coffee powder at this time.
After adding, press the power button to tare.

Click the Timer button to start the timer.
You are now ready to brew your coffee.
Click during the timer to pause the timer.
Press and hold for three seconds to reset the timer to zero.

ESPRESSO AUTO TIMING MODE

1. In normal mode, double-click the on button to enter the Espresso Auto Timing mode, the water drop icon will light up and blink.
   

2. When the balance detects that the object on the weighing pan is heavier than 9g, it will automatically tare (the water drop symbol will continue to flash). After taring, it will be detected again. The automatic time start only when the coffee drops are detected in the cup. The weight detected by the weighing platform at that moment (0.5-9g) is used to judge whether it is liquid coffee. If it is not within this range, it is assumed that other ingredients have been added. The weight is reset automatically.

3. When the coffee liquid is detected, the automatic timing will be activated, the water drop symbol will light up for a long time, and the timing will be maintained until there is no increase in weight on the scale platform (the pause time is less than 5 seconds, adding 0.5-9g of weight is still valid).
   If there is no increase of more than 0.5g within 5 seconds, the machine will judge that the coffee injection process is complete.

4. When adding coffee liquid, if the time is less than 15 seconds, the timer will stop after 15 seconds and the time and weight will flash synchronously.

BREWING AUTO TIMING MODE

1. in the Espresso Auto Timing mode, double click the switch button to enter the Brewing Auto Timing mode, and the water drop icon will be lit for a long time. (Figure 1)
   

2. Place the hand-brewed coffee unit on the scale plate and press the “M” button.
   The system (Fig. 2) flashes 3 times and then automatically clears the weight.
   At this point, the system starts the automatic detection (Fig. 3).
   When the weight on the scale increases to more than 0.5g, start the automatic timing (Fig. 4).

3. when brewing is complete and the unit is removed, the timer will automatically stop and display the time and weight of that brew. The time and weight will flash simultaneously to record data.
   Valid data will only be recorded if the timer is longer than 38 seconds.
   If it is less than 38 seconds, the weight data will not be displayed, but the timer will not stop.

4. During brewing, touch the “M” button once to pause the timer. Press and hold the “M” button for 3 seconds or click the On button to reset, then restart the brew auto timing mode. Double-click the “Switch” button to exit automatic brew timing mode and return to normal manual timing mode.

CALIBTATION AND SHUTDOWN

1. Calibration: If you find that there is an error in weighing during use, you can press and hold the ‘M’ button for three seconds under the power-on state. When the cal character appears, press this button again and 100 will appear after the cal character flashes.
   Please place 100g weight in the center of the scale, display pass after calibration, and restart it after shutting down for normal use.

2. Press and hold the on On/Off for about 3 seconds to turn off the scale.
   There is no operation under the power on state, and it will shut down automatically after standing still for about 3 minutes.

SPECIFICATIONS AND PARAMETERS

no operation
Work Environment| Temperature/10-40 C| Humidity <90%.| Air pressure: 80kPa- 106kPa
Storage Environment| Temperature/0-60 C| Humidity/<90%| Air pressure: 60kPa- 106kPa
Charging input| DC 5.1V| 1200mAh|
N.W.| 186g| GW| 346g

TO BETTER USE THIS PRODUCT, PLEASE UNDERSTAND THE PARAMETERS OF THE PRODUCT BEFORE USE.

Note:

1. This product is not waterproof and cannot be cleaned with water. The outside can be wiped with a wet towel.
2. This product is a precision device and cannot be disassembled. It should be handled with care when in use.
3. When connecting or using rechargeable products, be sure to use the appropriate charging adapter. The adapter requires an output voltage of 5.1 V and an output current of 1-2 A. Do not use during charging.

STEP TO COFFEE

THE COFFEE INFOGRAPHIC

To live like the American style is not everyone like, but very top

Cure our day with an iced Americano

When you have something on your mind, have an American style

2% of life + 98% of coffee put together in me

ESPRESSO

In terms of taste, I can’t accept the sugar- and cream-saturated instant; in terms of price, I can’t afford an expensive coffee maker.

MOKA POT

Quiet overflowing room, a cup of soft mocha coffee, as time passes little by little, the cup of mocha coffee is about to finish, the initial bitter taste has quietly disappeared, leaving only the soft taste of mocha coffee that permeates the small room …..

Manual brew kettle

When drinking coffee, it is always the emotions that dominate the time it takes to drink a cup of coffee, which can be ten minutes or an afternoon.

FRENCH PRESS

Instead of saying that the coffee is good, we should say that we like the way you drink coffee

TURKISH

Life is like making coffee, your duty is to extract the essence, not to worry about time.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>