Buderus EX100 Wi-Fi Gateway User Manual

June 16, 2024
Buderus

Buderus-logo

Buderus EX100 Wi-Fi Gateway

Product Information

Specifications

  • Product : Wi-Fi Gateway EX100
  • Model Number : 6721851722
  • Operation Modes : EX100 802.11b/g Hotspot (HT), WPS
  • Security : WPA/WPA2 (personal)
  • IP-class : IPx0
  • TCP/IP Stack : IPv4
  • Addressing : Static IP, DHCP
  • Frequency Band : 2412 – 2472 MHz
  • Transmission Power : Current: mW
  • Temperature Range
  • Power Consumption

Product Usage Instructions

  • Operation Modes
    The Wi-Fi Gateway EX100 supports two operation modes: 802.11b/g Hotspot (HT) and WPS. The Hotspot mode allows devices to connect to the gateway and access the internet. The WPS mode provides a simplified way to connect devices securely to the gateway.

  • Security
    The Wi-Fi Gateway EX100 supports WPA/WPA2 (personal) security protocols, ensuring a secure connection between devices and the gateway. It is recommended to set a strong password to protect your network.

  • IP-class
    The IP-class of the Wi-Fi Gateway EX100 is IPx0, which means it does not have any protection against solid objects or water ingress. It is important to keep the gateway in a safe and dry location to prevent any damage.

  • TCP/IP Stack
    The Wi-Fi Gateway EX100 uses IPv4 for its TCP/IP stack, allowing devices to communicate over the internet using the IPv4 protocol.

  • Addressing
    The Wi-Fi Gateway EX100 supports both static IP and DHCP addressing methods. You can either manually assign a specific IP address to the gateway or let it obtain an IP address automatically from a DHCP server.

  • Frequency Band
    The Wi-Fi Gateway EX100 operates on the frequency band of 2412 – 2472 MHz. This frequency range is commonly used for 2.4 GHz Wi-Fi networks.

  • Transmission Power
    The transmission power of the Wi-Fi Gateway EX100 is dependent on the current setting. Please refer to the product manual or settings interface to adjust the transmission power as needed.

  • Temperature Range
    The temperature range in which the Wi-Fi Gateway EX100 can operate effectively is not specified in the provided information. Please refer to the product manual or contact the manufacturer for detailed temperature specifications.

  • Power Consumption
    The power consumption of the Wi-Fi Gateway EX100 is not specified in the provided information. Please refer to the product manual or contact the manufacturer for detailed power consumption specifications.

FAQ (Frequently Asked Questions)

  • Q: How do I set up the Wi-Fi Gateway EX100?
    A: To set up the Wi-Fi Gateway EX100, follow these steps:
  1. 1. Connect the gateway to your modem or router using an Ethernet cable.
  2. Plug in the power adapter of the gateway and ensure it is powered on.
  3. Wait for the gateway to establish a connection with your network.
  4. Connect your devices to the Wi-Fi network broadcasted by the gateway using the provided SSID and password.
  • Q: How can I change the Wi-Fi network password?
    A: To change the Wi-Fi network password of the Wi-Fi Gateway EX100, follow these steps:
  1. 1. Access the gateway’s settings interface by typing its IP address into a web browser.
  2. Enter the administrator username and password (usually provided in the product manual).
  3. Navigate to the wireless settings section and locate the password field.
  4. Enter your desired new password and save the changes.

Wi-Fi Gateway EX100

Assembly

Buderus-EX100-Wi-Fi-Gateway-image-02 Buderus-
EX100-Wi-Fi-Gateway-image-03

Maintenance

Buderus-EX100-Wi-Fi-Gateway-image-04 Buderus-
EX100-Wi-Fi-Gateway-image-05 Buderus-EX100-Wi-Fi-Gateway-
image-06 Buderus-EX100-Wi-Fi-Gateway-
image-07 Buderus-EX100-Wi-Fi-Gateway-
image-08 Buderus-EX100-Wi-Fi-Gateway-
image-09

Instruction for use

Buderus-EX100-Wi-Fi-Gateway-image-10 Buderus-
EX100-Wi-Fi-Gateway-image-11 Buderus-EX100-Wi-Fi-Gateway-
image-12

| EX100
---|---
Operation modes| 802.11b/g Hotspot (HT), WPS
Security| WPA/WPA2 (personal)
IP-class| IPx0
TCP/IP Stack| IPv4
ID Addressing| Static IP, DHCP
Frequency Band| 2412 – 2472 MHz
Transmission power| < 6 dBm
Temp. Range| -20 °C up to +60 °C
Power Consumption| Voltage : 12V +/- 5% Current: <50mA
m| 50 g
| h = 82.5 mm, w = 30 mm, d = 10.5 mm

Buderus-EX100-Wi-Fi-Gateway-image-15 Buderus-
EX100-Wi-Fi-Gateway-image-16

General safety instructions

General safety instructions
Notices for the target group
These instructions are intended for the user of the product, for experts who are skilled in dealing with water installations, heating and electrical systems as well as the operator of the heating system.

  • Comply with all instructions of the system components.
  • Observe the safety instructions and warnings.
  • Follow national and regional regulations, technical regulations and guidelines.

Failure to comply with instructions may result in material damage and personal injury, including danger to life.

Intended use
Use the product only to control the appliance.
All other use is considered unsuitable. Any damage resulting from prohibited operations is excluded from liability.
The supply voltage to the Wi-Fi gateway EX100 should be achieved from a voltage source with limited power, classified as ES1 and PS1, according to the standard IEC 62368-1.
This device complies with the EN 62311:2020 exposure limits and has been evaluated in compliance with portable exposure condition. There is no limitation as to which distance can be used from the human body.

Updates
To receive software updates for the EX100

  • register EX100 via App MyBuderus.
  • Agree with conditions of use.
  • Connect EX100 to the Internet.

Open Source Software
The following text is in English for legal reasons.
This product contains both software that is proprietary Bosch software, licensed under the Bosch standard license terms, and Open Source software licensed on the basis of their licenses. The complete list of Open Source software license is available on the EX100 and is displayed with the help of App MyBuderus.

Data Protection Notice

An Internet connection is required to enable remote monitoring and remote control of a heating/ventilation system with this product. Once connected to the Internet, this product automatically establishes a connection with a server. During this process, the connection data, especially the IP address, are automatically transferred and processed by Bosch Thermotechnik GmbH. The processing can be set by restoring the default settings of this product. You can find further notices on data processing in the following data privacy statements and in the Internet.
We, Bosch Thermotechnology Ltd., Cotswold Way, Warndon, Worcester WR4 9SW, United Kingdom process product and installation information, technical and connection data, communication data, product registration and client history data to provide product functionality (art. 6 (1) sentence 1 (b) GDPR / UK GDPR), to fulfil our duty of product surveillance and for product safety and security reasons (art. 6  (1) sentence 1 (f) GDPR / UK GDPR), to safeguard our rights in connection with warranty and product registration questions (art. 6 (1) sentence 1 (f) GDPR / UK GDPR) and to analyze the distribution of our products and to provide individualized information and offers related to the product (art. 6 (1) sentence 1 (f) GDPR / UK GDPR). To provide services such as sales and marketing services, contract management, payment handling, programming, data hosting and hotline services we can commission and transfer data to external service providers and/or Bosch affiliated enterprises. In some cases, but only if appropriate data protection is ensured, personal data might be transferred to recipients located outside of the European Economic Area and the United Kingdom. Further information are provided on request. You can contact our Data Protection Officer under: Data Protection

Data Protection Notice

  • Officer, Information Security and Privacy (C/ISP), Robert Bosch GmbH, Postfach 30 02 20, 70442 Stuttgart, GERMANY.
  • You have the right to object, on grounds relating to your particular situation or where personal data are processed for direct marketing purposes, at any time to processing of your personal data which is based on art. 6 (1) sentence 1 (f) GDPR / UK GDPR. To exercise your rights, please contact us via privacy.ttgb@bosch.com To find further information, please follow the QR-Code.

Declaration of Conformity

Buderus-EX100-Wi-Fi-Gateway-image-18 Buderus-
EX100-Wi-Fi-Gateway-image-19

  • EU Declaration of Conformity
  • wireless controller
  • The manufacturer bears sole responsibility for issuing this Declaration of Conformity. The objects of this Declaration fulfil the relevant harmonised legal regulations of the European Union as stated below.
  • Manufacturer and (if Machinery Directive applicable) Person authorized to compile the technical file

Bosch Thermotechnik GmbH
Sophienstrasse 30-32
35576 Wetzlar, Germany
www.bosch-thermotechnology.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals