hama 00176645 Surveillance Camera WLAN Outdoor Camera Instruction Manual
- June 16, 2024
- Hama
Table of Contents
hama 00176645 Surveillance Camera WLAN Outdoor Camera
Introduction
Thank you for choosing a Hama product. Take your time and read the following
instructions and information completely. Please keep these operating
instructions in a safe place for future reference. If you sell the device,
please pass these operating instructions on to the new owner. 
Packaging contents
- 1x smart outdoor camera
- 1x power supply unit for camera
- 1x mounting kit
- 1x quick guide
- 1x warning and safety instructions
Safety instructions
Risk of electric shock
- Do not open the device or continue to operate it if it becomes damaged.
- Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Protect the product from dirt, moisture and overheating and use it in dry environments only.
- This product is intended for private, non-commercial use only.
- Use the product only for the intended purpose.
- Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- Do not use the product in areas in which electronic products are not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Do not operate the product outside the power limits given in the specifications.
- Only use the article under moderate climatic conditions.
- Do not mount the product above locations where persons might sit or stand.
- Before mounting, check that the wall you have chosen is suitable for the weight to be mounted. Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.
- Pay attention to the applicable data protection regulations before installing and using the product.
- Respect the personal and property rights of others. Do not make recordings of other people with the camera.
- Observe the right to one’s own image and spoken word when recording.
- As with all electrical products, this device should be kept out of the reach of children.
Installing the Hama Smart Home app
To use all of the device’s functions, you need a smartphone/tablet and the Hama Smart Home app.
Note
- The following operating systems are supported:
- iOS 16.3 or later
- Android 6.0 or later
- Download the Hama Smart Home app from the App Store (iOS) or from Google Play (Android) to your smartphone/tablet.
- To install the app, follow the instructions on your smartphone/tablet.
- Open the app on your smartphone/tablet.
Note
- While setting up the app, you will be asked whether the app has permission to access the functions of your smartphone/tablet. Say yes to these prompts for the full functionality of the device.
- Register to create a new account. Alternatively, log in with the access data of your existing account.
- Follow the instructions for setting up the app until you can add a new device.
Note: A detailed description of the Hama Smart Home app and all of its
functions can be found in our app guide at:
www.hama.com article number ð Downloads ð App
operating instructions.
Note: Ensure that you are using the latest version of the Hama Smart Home
app.
Product properties
The following steps are required to commission the device:
- Connect the device to a properly installed and easily accessible mains socket.
- Put the device in pairing mode by holding the button for around 5 seconds. The LED starts to flash quickly.
Installation
- You can secure the camera into place using the adhesive pads or mounting kit supplied.
Warning – installation with adhesive
- Be aware that the intended mounting surface must be free from dust and grease. Use a suitable cleaner from a specialist retailer for this.
- Be aware that the adhesive pads are intended to be permanent. Carefully pull the adhesive pad off the mounting surface to remove it.
- Various environmental influences, such as moisture in the air, sunlight, cold, etc., can impair the long-term stickiness of the adhesive pads.
- Possible residue on the mounting surface after removal of the adhesive pads cannot be ruled out!
Warning – mounting kit
- Do not mount the product above locations where persons might sit or stand.
- Before mounting, check that the wall you have chosen is suitable for the weight to be mounted. Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.
Integrating devices into the Hama Smart Home
Warning
- Only operate the product from an approved socket that is connected to the public power supply. The socket must be installed close to the product and must be easily accessible.
- Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
- If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the socket strip’s maximum throughput rating.
- If you will not be using the product for a prolonged period, disconnect it from mains power.
- Connect the camera to a properly installed socket.
- The LED on the camera starts to flash quickly. If it does not, press and hold the Reset button (4) on the camera for around 5 seconds.
- Open the app and sign in.
- Press the + in the top right-hand corner to add a new device.
- Choose Cameras from the list.
- Now confirm that the camera’s LED is flashing quickly by ticking “Next step” and clicking on “Next”. Ensure that the QR code is at the top right.
- Next enter your WiFi password and confirm with NEXT. Now scan the QR code with the camera from a distance of around 15 – 20 cm.
- As soon as you hear a signal sound, click “Signal sound heard”.
- Your camera is now connected.
- Once the connection is successful, the LED stops flashing quickly and the app confirms that your camera is connected. You can now assign it a different name if you wish.
- Click Finish to end the process.
- You can now operate and configure the camera.
Note: Pairing restart
First remove the rubber protector on one side of the camera. Now press the
Reset button with a needle or another thin object until a signal sound is
heard. As soon as the LED starts to flash red, you can start a further pairing
attempt.
Setting options
The following settings can be made in the app:
- Take a picture of the current live recording here.
- Talk to the other party:
- One-way audio: You can speak, but you will not be able to hear the other party.
- Two-way audio: Both parties are able to speak and hear each other.
- Record a video recording of the current activities. (A cloud connection or the presence of a memory card is required here).
- Play back video recordings from your gallery.
- Call up files from your cloud memory.
- Make settings for alarms.
- Open the photo album and view all of the images captured.
For extended usage options, scenarios can be created in the app. (See Section 9 and App Guide)
Extended usage options with scenarios
Scenarios and automated sequences that can be created in the app allow various
combination options and usage options for these products, depending on the
SmartHome products in your home. Programming is always via the app (see
Section 4 of the App Guide) and will be offered / suggested to you on an
individual basis.
Technical data
- WIFI outdoor camera 176645 / 46
- Length of cable 1 (permanently attached to the device) 47 cm
- Length of cable 2 (permanently attached to the device) 147 cm
- Power supply 12 V / 1 A
- Frequency band 2.4 GHz
- Maximum radio-frequency power transmitted < 100 mW
Care and maintenance
Note: Disconnect the device from the mains before cleaning and during
prolonged periods of non-use.
Only clean this product with a slightly damp, lint-free cloth and do not use
aggressive cleaning products. Ensure that no water is able to enter the
product.
Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or
from failure to observe the use instructions and/or safety notes.
Service and support
Please contact Hama Product Consulting if you have any questions about this
product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here:
www.hama.com
To limit exposure to electromagnetic fields
This device is intended for use at a distance of at least 20 cm from the body
of the user or persons nearby. This device must not be worn or carried on the
body.
Declaration of conformity
Hama GmbH & Co KG hereby declares that the radio equipment type [00176638] is
in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following Internet address:
https://de.hama.com 00176645, 00176646 Downloads.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>