Beyondhome 65756 4 Inch Thick Self Inflating Sleeping Pad Instruction Manual
- June 16, 2024
- Beyondhome
Table of Contents
**Beyondhome 65756 4 Inch Thick Self Inflating Sleeping Pad
**
The product in instruction sheet may look different from yours. It is for illustration purpose only.
Caution
Do NOT leave the pad inflated with closed valves inside tent on hot days. Air
inside the pad will expand when the temperature increase and the high pressure
may cause the fabric to delaminate from the foam. Open the valve when the mat
is not in use.
Do NOT expose to naked flame.
Not suitable for water activity, ie. Swimming pools or salt water. This is NOT water recreation product.
Washing & Cleaning
Use soapy water and rinse with clean water, then dry fully before storage.
Storage
Prior to storage, please ensure that the pad is completely dry. Failure to do so can result in excessive dampness leading to mildew, which can damage the fabric. We recommend that a pad should be extended period fully inflated and with the valve open. This retains the foam’s memory, allowing quick inflation when next used. It also maintains the pad’s integrity by allowing trapped moisture to escape.
Store pad in a cool dry place.
Part List
A Self-inflating sleeping PAD
B Binding Webbing
C Carry Bag with valve(can use as a pump)
Inflation
-
Take out the pad from the carry bag.
-
Detach the buckles of the webbing binding and extend the pad.
-
Turn valve cap anti-clockwise to open it. Turn the Flip Valve to “Inflate” position for valves(note: one valve only for single pad).
-
Wait for 6-10 minutes for pad’s self-inflating.
-
(Optional) If the hardness of pad is not enough, inflate the pad with carry bag till the hardness you want.
-
Close the valve cap clockwise till it’s a little tight. Take care not to over tighten the valve cap. Enjoy your sleeping pad!
Deflation
-
Turn and open the valve cap, reverse the Flip Valve to “Deflate” position.
-
Roll from the end opposite the valve applying gentle pressure to allow the air to escape more quickly. You may need to repeat 2-3 times rolling to remove the inside air completely.
-
Close the valve cap clockwise till it’s a little tight when the inside air is remove completely. Take care not to over-tighten the valve cap.
-
Lay the webbing binding at ground as extended below.
-
Roll the pad compact and put it on the webbing binding, assemble the handle buckle one by one. You may adjust the webbing length to make the webbing binding tight. You can hand carry the pad with the webbing handle without carry bag if you need.
-
Insert the bound pad into carry bag, Fold the opening of carry bag and assem- Ible the buckle.
3 Year Limited Warranty
Beyond warrants for a period of 3 year from the original date of purchase,
this product against any defects in materials or workmanship. At its
discretion, Beyond may provide replacement parts to original purchaser.
Original receipt or proof of purchase as well as proof of defect is required.
Beyond will not be responsible for shipping costs incurred outside the
continental USA.
Warranty is valid for the original purchaser 3 year from the date of purchase
and is not transferable. This Warranty does not cover any product purchased
through non authorized dealers and/or online auction websites.
This Warranty Does Not Cover
This 3 year Limited Warranty does NOT cover normal wear and tear, abuse or
misuse of this product including damage from inclement weather conditions,
such as wind, rain, or hail. In case of inclement weather remove all valuables
and persons and seek appropriate shelter. Under no circumstances will Beyond
Limited be liable or responsible for any incidental or consequential damages.
This product is designed and intended for Recreational use only. Prolonged
exposure to UV rays will cause any fabric to fade and deteriorate and is NOT
covered by this 3 year Limited Warranty.
All replacement products or parts will assume the remaining warranty of the
original product. This warranty gives you specific legal rights. You may also
have other rights which vary from state to state.
To Obtain Warranty Service
Please send mail to support@ebeyondhome.com
to get warranty service or any support.
Shenzhen Jie Jie Le Technoloty Co. Ltd.
Room 406 Rongqun Bulding, Longguan Dong Road, Longhua
Street, Longhua District, Shenzhen City, 518000, China
Email: Support@ebeyondhome.com
Tel: 516-896-6611 Mon-fri 9am-
5pm(Et)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>