KJK B0CP3WHF9K 2 Pack Trail Cameras User Manual

: June 16, 2024
: KJK

Table of Contents

How the Detection System Works.
Before activating my device
BATTERY TYPES AA
FREQUENTLY ASKED QUESTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

B0CP3WHF9K 2 Pack Trail Cameras
User Manual Nov.30.2023
Update

IMPORTANT INFORMATION BEFORE USING YOUR CAMERA
Can the trail camera connect to Wi-Fi?
This trail camera cannot connect to Wi-Fi or use any mobile applications.
Why can’t I find the included memory card?
For ease of use, the memory card has been inserted into the machine.

How the Detection System Works.

The Passive IR detection system detects any heat variation (human and animal activity. moving cars. branches in the sun, etc).When a change in heat and motion is perceived. the detection system triggers the camera to take a photo or video.
The detection system consists of 2essential parts: the infrared sensor and the Fresnel detection lens.
The sensor is hidden inside the camera. It is the piece that detects the changes in heat and detects motion.
The Fresnel lens is a molded plastic lens that improves the sensitivity and accuracy of the sensor. If your lens is damaged. the detection system will no longer be optimal. It is possible to order a new one.
We recommend hanging the camera at the height of the heat source being aimed at. For deer it is recommended to install the camera one meter above the ground. or 3 feet high.
To maximize the range of your detection system, the device should be installed parallel to the ground. If your device is tilted toward the ground, the detection range will be reduced.
You should never install the device behind any type of shielding material such as glass or plexiglass and ensure the area within the detection range is clear of anything that may move or emit heat from the sun such as grass, limbs, metal or large rocks.

OFF – The trail camera power is completely turned off. You can install the battery and memory card.
SETUP – Modify the trail camera parameter settings and press the REPLAY button to preview the recorded video or image.
Press the SHOT button to manually record a video or take a photo.
Note: In this mode, the camera will not automatically take photos or record videos.
ON – When the switch is turned from SETUP to ON, LCD will turn off after 5S and button operation will be disabled. The camera enters working mode.

Before activating my device

Make sure that the device is turned OFF before inserting the batteries and memory card.
Once the batteries and memory card are inserted, you can turn the unit ON.
CAUTION: Never remove the batteries or memory card while the unit is in operation. This could damage the photos and/or videos on the memory card or even the device.
To turn OFF the device and / or remove the memory card, please turn the power switch OFF and wait 5 seconds before doing any other operations.
It is strongly recommended to remove the batteries if the device is no longer in use or if it is stored for a long period of time. It is also very important to remove the batteries from the unit if it is sent for repairs or exchange.

All about SD and microSD Cards
All KJK devices need a memory card to function, either and SD or Micro SD, depending on the device. We always recommend using a premium quality SD or MicroSD card that is class 10. 2-32 GB and SDHC. Always long-format your SD or MicroSD card. even if it is new. Formatting also hellos prevent file incompatibility issues caused by having used the same card in another device.

BATTERY TYPES AA

We strongly recommend testing AA batteries (even new ones) with a multimeter before use.
Make sure they are at least 1.5V and that all the batteries have the same battery percentage (or very close to): If you have one of eight batteries that is dead, our camera could stop transmitting photos.
Our devices require the following types of AA batteries:
· non-rechargeable,
· from a premium brand,
· alkaline.
Off brand batteries may provide unreliable voltage or inconsistent battery life which can affect camera function.
Solar panel with lithium battery
The solar panel can provide your camera with at least six months of autonomy. Before installation, charge the panel for 5-6 hours with the DC power adapter. When you install it, connect it to the 6V output port on your camera. Orient the panel so that it catches as much light as possible. ideally facing south.
It is compatible with all KJK cameras with a 6V socket.

FREQUENTLY ASKED QUESTIONS

Can i use AA batteries and an external 6 Volt battery at the same time? Yes, you can. If the 6V battery dies, it will use the AA as a backup.
All our devices are compatible with 6V batteries (which have a much longer life than AA batteries). All you need is the proper cable.

Why is my battery draining too fast?

There can be many factors causing the battery to drain quickly: .Videos: Video mode requires the camera to stay in action longer, which will consume the batteries faster. Also, the longer the video, the faster the batteries will drain. ·Night mode: This mode requires the flash to turn on to take a proder photo.which consumes more dower. ·Polarity- AA batteries placed upside down. If you have new batteries but the camera does not display 100% battery level. one of the batteries may be upside down. ·Delay: This feature allows you to select the time elapsed before the camera can detect again and take the next photo. If you want to capture multiple photos, you will need to use a shorter delay which means more battery consumption. The shorter the delay, the more photos the camera will take, which will consume the batteries faster. ·Multishot: This option tells the camera how many photos it should take for each detection. The higher is the multishot, the more pictures the camera will take, which will consume the batteries faster.

Why is my camera saying the battery is low when I just changed them?

·Make sure all the batteries are of the same brand and have the same charge. .Check that all the batteries are placed correctly in the camera: sometimes one or two can be in the wrong polarity and this affects the cameras functioning. Perform a factory reset to reset the values (this process differs depending on the model of camera). If the power issue persists, you will need to contact our customer support team for further assistance. NOTE: When the power is only 1/3 is not able to shoot at night. Since the camera would startup built-in IR leds when motion is captured at night the power consumption at night time is several times than that in daytime, and it requires a higher power of batteries to drive IR leds working. you can see the remaining power in the bottom right corner of the screen. Recommend 1.5 V AA alkaline batteries( 8 Energizer brand) They last two to three times longer than regular batteries. How to determine whether the camera's motion sensor is working properly? After configuration, turn the power switch to the SETUP mode. After about 15S, please walk to the front of the camera. If the blue or green light flashes, it indicates that the camera's infrared motion sensor is working properly. In addition, this method can also help you adjust the camera direction and angle, and determine whether the current position is within the monitoring range of the camera. The results of your testing will help you find the best placement when mounting and aiming the camera. The height away from the ground for placing the device should vary with the animal size appropriately. In general, 3 to 6 feet is preferred.

What to look for when installing your camera

Make sure you clear the area in front of the installed unit. Any branches, tall grass, or other elements that can move in the wind could create false detections. Also take note of objects that can reflect the sun towards the camera obstructing the view.
Make sure to place the product facing south if your camera has a built-in solar panel and facing north if it does not. This will increase the performance of your solar panel and improve the quality of your photos.
Install the product at the same height as the body of the animal you want to see in your photos. (Recommendation for deer is the height of your belt) Install the product so that it is parallel to the ground. This improves the detection range and the IR flash coverage as well. Make sure the glass protecting the image sensor is not dirty. This could affect the image quality.
Install your device, with the included strap, firmly on a stable object(egatree).Make sure the unit is stationar and that the object on which it is installed is not likely to move with the wind. This would cause false camera detections.
Install your device in order to reduce the presence of sky in your photos. You will get better photos this way. Too much sky in the photo can cause the IR firing to be delayed in the evenings causing dark photos. Try to have elements in the background to reflect the infrared light produced by the camera at night to get brighter photos. The denser the background, the better the quality of your night photos. Example: Open food plots or fields will result in darker ohotos.Picturestakenin the woods will aopear noticeablv brighter with adeauate IR reflection. Make sure you insert the SD or microSD card in your device.All of our devices need a memory card to work properly. Make sure to install the batteries in the right direction. Carefully follow the visual indications on the battery compartment for your device. Make sure you have removed the small transparent sticker on the detection lens. The transparent sticker will prevent proper motion detection. Make sure your device’s door (s) is properly closed and that the gaskets are clean. This will prevent water or residue from seeping into the device. The number in the top right corner of the screen indicates the length of recordable or number of photos that can be taken.