waterway PD-270A Power Defender 270 Variable Speed Pump Installation Guide
- June 16, 2024
- waterway
Table of Contents
waterway PD-270A Power Defender 270 Variable Speed Pump Installation Guide
1. Use Three 2.7 Horsepower Variable Speed PD-270SVL.
2. Each jet can have its own designated air line with a Hartford loop. Air
can also be plumbed through a manifold to control all three jets.
SYSTEM COMPONENTS
Adapters will be needed: Strip drains, Pump, and Tee are 2.5″ Schedule 40 PVC.
Sweeps are 3″ S, Schedule 40 PVC, and each jet is 2″ S, Schedule 40 PVC.
This is general information – for more specifics, please refer to a pool designer.
640-136x V Diamond Strip Drain Components – Concrete
DIAMOND STRIP DRAIN HEAD LOSS CURVE
OLD FAITHFUL STRAIGHT BODY GUNITE INSTALLATION INSTRUCTIONS
NOTE: Install 0.925″ nozzle in top jets, install 1.5″ nozzle in bottom jet.
SUGGESTED LAYOUT FOR 3 OLD FAITHFUL JETS
NOTE: Air from all three jets can be plumbed together.
OLD FAITHFUL PART NUMBERS
OLD FAITHFUL STRAIGHT BODY DIMENSIONS
POWER DEFENDER 270 SVL PUMP REPLACEMENT PARTS
PUMP UNION ASSEMBLY
PUMP UNION REPLACEMENT PARTS
2200 East Sturgis Road, Oxnard CA 93030 • Phone 805.981.0262 • Fax
805.981.9403
www.waterwayplastics.com •
[email protected]
Read More About This Manual & Download PDF: