DOMETIC TLB100 Power and Control Tempra Battery Instruction Manual

DOMETIC TLB100 Power and Control Tempra Battery

Product Information

• Specifications

  • Models: TLB100, TLB120, TLB150, TLB100F, TLB120F, TLB150F
  • Languages: EN, DE, FR, ES, PT, IT, NL, DA, SV, NO, FI, PL, SK, CS, HU, HR, TR, SL, RO, BG, ET, EL, LT, LV

• Important Notes

  • Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual to ensure that you install, use, and maintain the product properly at all times.

  • These instructions MUST stay with this product.

• Related Documents

  • Find the installation and operating manual online at qr.dometic.com/be1uZS.

• Safety Instructions

  • WARNING! Failure to obey these warnings could result in death or serious injury.
  • BAIL! Failure to obey these warnings could result in death or serious injury.
  • NOTICE! Indicates a situation that, if not avoided, can result in property damage.

Scope of Delivery

Target Group

• The electrical power supply must be connected by a qualified electrician who has demonstrated skill and knowledge related to the construction and operation of electrical equipment and installations, and who is familiar with the applicable regulations of the country in which the equipment is to be installed and/ or used, and has received safety training to identify and avoid the hazards involved.

Intended Use

• The battery is intended to provide energy to the appliances and equipment in a motorhome.
• The battery is intended to be used with 12 V electrical systems.
• This product is only suitable for the intended purpose and application of these instructions.
• This manual provides information that is necessary for the proper installation and/or operation of the product.
• Poor installation and/or improper operation or maintenance will result in unsatisfactory performance and possible failure.

Product Usage Instructions

• Battery Short Operating Manual
  • Please refer to the specific battery operating manual provided for detailed instructions on how to use the battery.
• Resetting Password
  • To reset the password, follow these steps:
  • Access the device settings menu.
  • Select “RESET PASSWORD”.
  • Follow the on-screen prompts to complete the password reset process.
• Battery Disconnect
  • To disconnect the battery, follow these steps:
  • Ensure that the device is powered off.
  • Locate the battery terminals.
  • Remove the black terminal protection cap.
  • Disconnect the black terminal from the battery.
  • Remove the red terminal protection cap.
  • Disconnect the red terminal from the battery.
• N-BUS Diagnostics
  • To access N-BUS diagnostics, follow these steps:
  • Access the device settings menu.
  • Select “N-BUS DIAGNOSTICS”.
  • Follow the on-screen prompts to view diagnostic information.
• FAQs
  • Q: Where can I find the installation and operating manual?
  • A: The installation and operating manual can be found online at qr.dometic.com/be1uZS.
  • Q: What is the intended use of the battery?
  • A: The battery is intended to provide energy to the appliances and equipment in a motorhome. It is designed for use with 12 V electrical systems.
  • Q: How do I reset the password?
  • A: To reset the password, access the device settings menu and select “RESET PASSWORD”. Follow the on-screen prompts to complete the password reset process.

Important notes

• Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure that you install, use, and maintain the product properly at all times.
• These instructions MUST stay with this product.
• By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and agree to abide by the terms and conditions as set forth herein.
• You agree to use this product only for the intended purpose and application and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all applicable laws and regulations.
• A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property in the vicinity.
• This product manual, including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit documents.dometic.com.

Related documents

Find the installation and operating manual online at qr.dometic.com/be1uZS.

Safety instructions

• WARNING! Failure to obey these warnings could result in death or serious injury.
  • In the event of a fire, use a fire extinguisher which is suitable for electrical devices.
  • Do not operate the device if it is visibly damaged.
• CAUTION! Failure to obey these warnings could result in death or serious injury.
  • Installation, assembly, and wiring as well as all other work may only be performed by qualified electrical specialists. Inadequate repairs may cause serious hazards.
• Installation in potentially explosive areas such as rooms with inflammable liquids or gases is not permitted.
• Do not install or keep the device near flames or other heat sources (heating, direct sunlight, gas ovens etc.).
• Children shall not play with the appliance.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.

NOTICE! Indicates a situation that, if not avoided, can result in property damage.

• Check that the voltage specification on the data plate corresponds to that of the energy supply.
• Never immerse the device in water.
• Protect the device and cables against heat and moisture.
• Do not expose the device to rain.
• Ensure that the mounting surface is capable of supporting the weight of the device.
• Lay the cables so that they cannot be tripped over or damaged.
• Use ductwork or cable ducts if it is necessary to lay cables through metal panels or other panels with sharp edges.

Scope of delivery

Target group

• The electrical power supply must be connected by a qualified electrician who has demonstrated skill and knowledge related to the construction and operation of electrical equipment and installations, and who is familiar with the applicable regulations of the country in which the equipment is to be installed and/or used, and has received safety training to identify and avoid the hazards involved.

Intended use

• The battery is intended to provide energy to the appliances and equipment in a motorhome. The battery is intended to be used with 12 V electrical systems.
• This product is only suitable for the intended purpose and application in accordance with these instructions.
• This manual provides information that is necessary for proper installation and/or operation of the product.
• Poor installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible failure.
• The manufacturer accepts no liability for any injury or damage to the product resulting from:
  • Incorrect installation, assembly or connection, including excess voltage
  • Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
  • Alterations to the product without express permission from the manufacturer
  • Use for purposes other than those described in this manual
  • Dometic reserves the right to change product appearance and product specifications.

Operation

NOTE

• Always charge the battery completely before using it to its full potential.

Activation

The factory setting for the battery is the inactive mode: No voltage is present at the terminals. To use the battery it must be activated and switched on. Fig. on page 1

1. Ensure that the DIP switch 6 (1) is set to the on position (factory setting).
   • If other devices are connected to the battery via the BUS (4), ensure that DIP switch 5 is set to the on position (factory setting).
2. Press and hold the On/Off switch (2) for 1 s. The battery is active when the LED (3) lights up.

Shutting down
The battery can be switched off in four different ways:

• With the display button
• With the On/Off switch
• With the DIP switch 6
• With the smartphone application

Fig. on page 2

• To switch off the battery on the display press and hold the button until the message “Shutdown” is displayed.
• The battery will turn off with the Bluetooth ® function remaining active.

Fig. 1

• To switch off the battery together with the Bluetooth ® function, press and hold the On/Off switch (2) for 8 s until the LED (3) starts flashing in purple.
• To switch off the battery leaving the Bluetooth® function active, press and hold the On/Off switch (2) for 4 s until the LED (3) starts flashing in blue.
• To deactivate the battery for a longer time (e.g. for storage), push the DIP switch 6 (1) into the off position.

Shutting down by the smartphone application
Fig. on page 2

1. Tap on the menu icon (1).
2. Tap on the Bluetooth® icon (2).
3. Tap on the battery disconnection icon (3).

The battery will switch off after a few seconds with the Bluetooth® function remaining active.

LED indications

terminals.
Green flashing| Battery active. Voltage is present at the terminals.
Blue flashing| Battery powering down. Bluetooth® ac- tive. No voltage is present at the terminals.
Purple flashing| Battery powering down. Bluetooth® not active. No voltage is present at the terminals.
Red flashing| Battery alarm. No voltage is present at the terminals.
Orange flash-ing| Temperature range limit reached. Voltage is present at the terminals.
Orange constantly lit| Firmware update.
Off| Battery inactive. No voltage is present at the terminals.

Charging

• When charging the battery with an external charger, observe the following guidelines:
• For best results use chargers intended for charging
• LiFePO4 batteries. If you do not have such a charger, you can use lead-acid battery chargers.
• The charger must not perform any desulfation action.
• When using a configurable charger set the contact current/constant voltage (CC/CV) option with the following values:
• Set the end of charge voltage to 14.4 V.
• Set the recommended maximum charging current for the battery.
• The maximum charging voltage should not exceed 14.5 V.
• At the end of the charging the charger can be disconnected, turned off, or kept connected at float voltage.
• TLB100F, TLB120F and TLB150F models: When the battery is being charged at temperatures below 0 °C, the cell heating system is activated. The cell heating system uses the charger’s energy to power itself. Once the ideal charging temperature is reached, the heating is switched off and the charging begins. If during charging the temperature rises above the permissible range, the internal battery management system (BMS) will limit the charge to preserve battery life.

Discharge

• The internal battery management system (BMS) protects the electronic system and the battery cells.
• It supports a continuous current of 135 A. However, it is possible to use higher currents for a limited time, in accordance with the following values.

NOTICE! Damage hazard

• Do not discharge the battery outside the temperature range of -20 °C … 60 °C.
• If the voltage drops below 10.5 V\ ± 0.1 V, the battery generates an alarm and deactivates the terminals.

Storing

• The battery is active and connected to the electrical system (e.g., of a vehicle):
  • Before storing fully charge the battery with a recommended battery charger for 1 to 2 days.
  • When the battery is not in use, ensure that the battery voltage does not drop below 12.6 V.
  • While storing the battery recharge it completely every 30 days.
• The battery is not connected to an electrical system (shelf storing):
  • Before storing charge the battery fully or at least to 70 % using a recommended charger.
  • When the battery is active (green LED flashing), recharge every 6 months.
  • If the battery is automatically switched off due to a total discharge, it must be recharged as soon as possible, but at least within 7 days.
  • It is possible to keep the battery switched off (dip switches 5 and 6 in the off position) for up to two years.

Disposal

Recycling packaging material:

• Place the packaging material in the appropriate recycling waste bins wherever possible.

Recycling products with batteries, rechargeable batteries and light sources:

• Remove any batteries, rechargeable batteries, and light sources before recycling the product.
• Return defective or used batteries to your retailer or dispose of them at collection points.
• Do not dispose of any batteries, rechargeable batteries, and light sources with general household waste.
• If you wish to finally dispose of the product, ask your local recycling centre or specialist dealer for details about how to do this following the applicable disposal regulations.
• The product can be disposed of free of charge.

Technical data

Hereby, Dometic Germany GmbH declares that the radio equipment type TLB100/TLB100F/TLB120/TLB120F/ TLB150/TLB150F complies with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following internet address: http://documents.dometic.com.

A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of:

• DOMETIC GROUP AB
• Hemvärnsgatan 15
• SE-17154 Solna
• Sweden
• 4445104089 2023-12-21

Copyright

• © 2023 Dometic Group.
• The visual appearance of the contents of this manual is protected by copyright and design law.
• The underlying technical design and the products contained herein may be protected by design, patent or be patent pending.
• The trademarks mentioned in this manual belong to Dometic Sweden AB.
• All rights are reserved.

References

• Find a Dealer | Dometic USA
• MDaemon Webmail
• Home

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>