Lovcour X6 Bone Conduction Swimming Headphones Instructions Product Information
- January 10, 2024
- Lovcour
Table of Contents
- X6 Bone Conduction Swimming Headphones
- Product Information
- Specifications
- Product Usage Instructions
- Charge
- Music Play
- Answering Calls
- Bluetooth Pairing
- AI Intelligent Voice Control
- Song Download
- Q: How long does it take to fully charge the headphone?
- Q: How long is the play time of the headphone?
- Q: What is the Bluetooth distance range of the headphone?
X6 Bone Conduction Swimming Headphones
Product Information
Specifications
- Version: 5.3
- Distance: Bluetooth 10 meters
- Input: 5V/180mA
- Battery: 230mAh
- Play Time: More than 5 hours at 70% volume
- Agreement: a2dp1.3.2avctp1.4avdtp1.3avrcp
Product Usage Instructions
Charge
The headphone uses a built-in rechargeable battery. For the
first use, it is recommended to fully charge the battery. If the
voice prompts low battery during use, the battery is low and needs
to be charged.
-
Connect the charging cable to the headphone’s magnetic charging
port. -
Allow the headphone to charge for approximately 2 hours.
-
The charging status indicator will show a red light while
charging and a blue light when fully charged.
Music Play
To play music with the headphone, follow the instructions
below:
- To increase volume, click the “+” button.
- To reduce volume, click the “-” button.
- To play the next song, click and hold the “+” button.
- To play the previous song, click and hold the “-” button.
- To pause or resume music playback, click the play/pause
button.
Answering Calls
To answer an incoming call with the headphone, follow the
instructions below:
-
Short press the power button to answer the call.
-
To decline a call, long press the power button for 1
second. -
To hang up during a call, long press the power button for 1
second.
Bluetooth Pairing
To pair the headphone with a Bluetooth device, follow the
instructions below:
-
Ensure the headphone is in the off state.
-
Press and hold the power button for 3 to 5 seconds until the
light starts flashing red and blue. -
Enable Bluetooth on your device (e.g., cell phone or computer)
and search for the device named “X6”. -
Select “X6” from the search results to pair and connect.
Note: To switch between Bluetooth and memory mode, double click
the power button.
AI Intelligent Voice Control
If your phone supports voice wake-up function, you can use AI
intelligent voice control with the headphone. Follow the
instructions below:
-
In the Bluetooth connection state, long press the power button
for 1 second to wake up. -
After hearing the tone, you can voice manipulate your phone
without operating it directly.
Note: The headphone will automatically default to Bluetooth mode
upon power on.
Song Download
You can download songs to the headphone by connecting it to a
computer using the original charging cable. Follow the steps
below:
-
Connect the original charging cable to both the computer and
the headphones. -
Access the headphone as a USB device on the computer.
-
Copy songs from the computer to the headphone.
FAQ
Q: How long does it take to fully charge the headphone?
A: It takes approximately 2 hours to fully charge the
headphone.
Q: How long is the play time of the headphone?
A: The headphone can play music for more than 5 hours at 70%
volume.
Q: What is the Bluetooth distance range of the headphone?
A: The Bluetooth range of the headphone is up to 10 meters.
BBoonneeCCoonndduuctcitoionnBBluleuteotootohthHeEaadrpphhoonnee
Instructions for usage and warranty
Headphone introduced
æ
ç è é ê ë æ Indicator light ç Magnetic suction charging port è Volume “-”
button é On/off button ê Volume “+” button ë Microphone
Charge
Music Play
The headphone uses a built-in rechargeable battery , the first use of the
headphone must be fully charged to the battery .In use , if the voice promps
“low battery”, the battery is low, and you need to charge the headphone.
The charging cable should be connected to the headphone magnetic charging port
, about 2 hours to be fully charged. The charging status indicator’s red light
is always on, full charge is always on the blue light.
Function Headphone status
Increase volume Reduce volume
Play music Play music
Last song Next song
Play music Play music
Pause
Play music
Resume
Pause
Operation click “- ” click “+” Press and Hold ” + ” Click and Hold ” – ” Click the on/off button Click the on/off button
Note : Magnetic charging has a positive and negative polarity correspondence, mutual adsorption can be charged normally, and mutual repulsion will not charge or even cause a short circuit.
Answer the phone
Function
Headphone status
Operation
Warning : The rechargeable battery of this product must Answer the call be disposed of properly for recycling. Please do not put the battery into the fire ,so as not to cause an explosion .
Short press the
Incoming call power button to answer
Operating instruction
Function On Off
Operation
Press and hold é (around 3-5 seconds )
Press and hold é (around 3-5 seconds )
Indicator Light on Light off
Decline the call
volume control Phone/Bluetooth headset switch
Incoming call During call During call
Long press the power button for 1 second to hang up
click “+” / “-”
Long press and hold the power on button for 1 second
Operating instruction
AI intelligent voice control
(Phone needs to support voice wake-up function)
Product parameter
How to pair with Bluetooth Bluetooth pairing:In the off state, press and hold
the power button for 3 to 5 seconds, the light into the red and blue flashing
state, and then enter the pairing state. Turn on the Bluetooth (cell
phone/computer) on the device and search for he device name ” X6 “, click the
device” X6 “to pair and connect.
Bluetooth / MP3 mode switching:Double click the power button (multi-function
composite button) to freely switch between Bluetooth and memory mode
Function headphone status
Operation
Voice control Bluetooth is connected
Press and hold the On/Off button fro 1 second
Description: In the Bluetooth connection state,long press the power on button for 1 second to wake up, after hearing the tone you can voice manipulate the phone, save the time to operate the phone, fast and intelligent.
Emphasis: The power on automatically default Bluetooth
mode status.
Song download: Connect the original charging cable to Indicator
the computer and headphones, you can read the USB,
and copy the computer songs to the USB.
Charging
Red linght(always on)
Warm tip: Bluetooth headphone will automatically search for the latest device to connect after powering on. When the Bluetooth headphone and the device deviate from the effective distance of 10 meters (33 feet), the Bluetooth headphone will be disconnected from the device, and they will be reconnected only when they are placed within 10 meters again, if the Bluetooth headphone is disconnected from the device for too long, then you need to click the multi-function button on the Bluetooth headphone to reconnect.
Charging completed Search for pairing
Blue light (always on)
Flash in red and blue alternately
Bluetooth music playback Blue light flashes slowly for 5 seconds
Charging time: About 2 hours
Version: 5.3
Distance: Bluetooth 10 meter
Input: 5V/180mA
Battery: 230mAh
Play: More than 5 hours@70% volume
Agreement: a2dp1.3.2avctp1.4avdtp 1.3 avrcp
1.6.2hfp 1.8 spp 1.2rfcomm 1.1pnp 1.3hid1.1.1
sdpcore5.3l2cap core 5.3
Music format support: WAV,FLAC,WMA,AAC,MP3,
APE, M4A
Maintenance and cleaning.
The headphone can not soak seawater/salt water for a long time, they use fresh
water to rinse and dry. Charging electromagnetic suction part is easy to
corrode.
If not used for a long time, please at least once a month full charge.
Please do not disassemble any parts of the product, such as the discovery of
product defects immediately stop using the product, and contact the seller
after-sales service.
After each campaign, please wipe the surface of the headphone water,
especially the location of the filling electromagnetic suction, to deal with
the cleaning in time to prevent sweat, and salt water corrosion charging port,
affecting the life of the product.
Keep the product away from fire ,heat,freezing sources, chemicals, violent
impact disassembly and extrusion products are strictly prohibited .
Please use a charging head with an output of 5V1A or less .
Certificate of conformity
Product warranty card
This card is a product warranty certificate, please keep it properly
Product name:
Product model:
Purchase date:
Client’s name:
Contact:
Date
Product maintenance records
Bad phenomenon
Solution