E+ TOP TUBE ADD-ON Momentum Bikes User Manual
- June 16, 2024
- momentum
Table of Contents
E+ TOP TUBE ADD-ON Momentum Bikes
CITO E+ TOP TUBE ADD-ON
Specifications
- Material : Aluminum
- Color : black
- Weight : 1. Slbs/0.7kg
- Dimension : 18.l”x 2.B”x 2″/46cm x 7cm x 5cm
- Max load : lbs/Skg
Package Contents
- 1 x Cito E+ Top Tube Add-on with twist close storage hatch 1 x Inner storage pouch
- 1 x Cito E+ stickers
- 1 x Downtube connection rubber gasket
- 1 x Seat tube connection rubber gasket
- 1 x bracket for the downtube connection
- 1 x bracket for the seat tube connection
- 3 x M5*12 flat bolts
- 3 x M5*12 bolts
Warning
- Read all information in this manual carefully before you start using the Cito E+ Top Tube Add-on. Safety instructions are very important and should not be overlooked. By reading the manual you will have a better understanding of the general operation.
- Only use the Cito E+ Top Tube Add-on with supplied installation hardware.
- Do not modify the Cito E+ Top Tube Add-on in any way.
- Do not exceed the maximum load weight limit. lllbs/Skg.
- Periodically check all bolts are tight as vibrations may loosen them over time.
- Do not use the Cito E+ Top Tube Add-on to move or lift the bike.
- Do not seat, stand, or Affix load-bearing accessories, such as child seats. This is a non-structural part, and will potentially put the rider and/or passenger at risk of injury or death.
- The Top Tube Add-on is ONIY compatible with Cito E+.
- Regulation can vary by country, and/or location, always check in advance.
Installation
-
Ensure the bike is switched off with the kickstand engaged and is on level ground.
-
Remove any accessories that may interfere with the installation and/or use of the Cito E+ Top Tube Add-on.
-
Install the bracket:
-
The downtube side:
mount the bracket with two M5*12 bolts with a 4mm hex torque wrench to tighten to 5-8Nm. -
The seat tube side:
mount the bracket with one M5*12 bolt with a 4mm hex torque wrench to tighten to 5-8Nm.
-
-
Attach the downtube and seat tube connection rubber gaskets to the Top Tube Add-on. Position and install the Top Tube Add-on to each bracket
- The downtube side:
Lift the rubber flap and mount the bracket with two M512 flat bolts with a 3mm hex torque wrench to tighten to 5-8Nm. The seat tube side: lift the rubber flap and mount the bracket with one M512 flat bolt with a 3mm hex torque wrench to tighten to 5-BNm.
- The downtube side:
-
Select the Cito E+ Stickers that complement the color of your Cito E+. Choose a clean and smooth surface, peel the protective backing, and stick on the Top Tube Add-on. We recommend applying the stickers on both sides of the front section of the Top Tube Add-on.
-
Double-check if the Cito E+ Top Tube Add-on is properly installed. The Cito E+ Top Tube Add-on should not move or rotate in any direction.
Usage information
- Check if the Cito E+ Top Tube Add-on is firmly mounted before every ride.
- Regularly check the state of the Cito E+ Top Tube Add-on and mounting hardware & brackets for any signs of looseness, deterioration, corrosion, or other damage.
- Do not exceed the maximum load weight limit of lllbs/5kg.
LIMITED PRODUCT WARRANTY INFORMATION
Giant Global Inc. warrants its products for one (1) year from the date of purchase, this applies only to the original owner. This warranty applies only to this product when purchased new from an Authorized Giant Dealer and assembled by that dealer at the time of purchase.
LIMITED REMEDY
Unless otherwise provided, the sole remedy under the above warranty, or any
implied warranty, is limited to the replacement of defective parts with those
of equal or greater value at the sole discretion of Giant Global Inc. This
warranty extends from the date of purchase, applies only to the original
owner, and is not transferable. In no event shall Giant Global Inc. be
responsible for any direct, incidental, or consequential damages, including,
without limitation, damages for personal injury, property damage, or economic
losses, whether based on contract, warranty, negligence, product liability, or
any other theory.
EXCLUSIONS
The above warranty, or any implied warranty, does not cover:
- Normal wear and tear on parts in situations where there are no assembly or material defects.
- Products serviced by other than an Authorized Giant dealer.
- Modifications of the product from its original condition.
- Use of this product for abnormal, competition, and/or commercial activities or for purposes other than those for which this product was designed.
- Damage caused by failing to follow the User’s Manual.
- Paint, finish, and decal damage resulting from taking part in competitions, jumping, downhill, and/or training for such activities or events or as a result of exposing the product to, or operating the product in, severe conditions or climates.
- Labor charges for part replacement or changeover.
Except as is provided by this warranty and subject to all additional warranties, Giant Global Inc. and its employees and agents shall not be liable for any loss or damage whatsoever (including incidental and consequential loss or damage caused by negligence or default) arising from or concerning any Giant Global Inc. product.
Giant Global Inc. makes no other warranties, express or implied. All implied warranties, including the warranties of merchantability and fitness for a particular purpose, are limited in duration to that of the express warranties stated above.
Any claim against this warranty must be made through an Authorized Giant Dealer or distributor. The purchase receipt or other proof of the date of purchase is required before a warranty claim may be processed. Claims made outside the country of purchase may be subject to fees and additional restrictions. Warranty duration and details may differ by country. This warranty gives you specific legal rights, and you may also have other rights which may vary from place to place.
THIS WARRANTY DOES NOT AFFECT YOUR STATUTORY RIGHTS.
Disclaimer
To ensure safety, quality, and reliability, use only original parts or Giant-
authorized replacements for repair and replacement. Giant is not responsible
for any direct, incidental, or consequential damages, including, without
limitation, damages for personal injury, property damage, or economic losses
due to improper use.
Momentum and its symbol are trademarks of Giant Group. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>