Creyer Y9164-2D LED Ceiling Light Rotatable Instructions

: June 16, 2024
: Creyer

Table of Contents

Important Information
MOUNTING INSTRUCTION
DECLARATION OF SYMBOLS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Creyer Y9164-2D LED Ceiling Light Rotatable

Creyer Y9164-2D LED Ceiling Light Rotatable

Important Information

Please note the information contained in these Instructions and save this manual.
Technical data: 220-240V AC, see fixture label!

Electrical appliances must only be connected professional person.
Important! Before commencing installation work disconnect the main cable from the power supply-remove fuse or put switch to “OFF”.
Indoor Lighting: This lamp is suitable only for living accommodation premises and not for areas in which moisture-proofing is required. The light may only be installed out of range of the shower head. Refer to your national electrical safety standards and requirements to establish exactly where it is safe and legal to install the lighting fixture.
Lighting elements and transformers reach high temperatures when in operation: improper use can lead to a fire hazard and the change of the bulbs can lead to injuries!(cool down)
Lamps which carry the symbol are suitable for installing on materials with normal combustibility. If the lamp does not carry the symbol it must not be installed on materials with normal combustibility.The temperature constancy of the fastening area must withstand at least 90 deg.C.
Before using the the lamp, make sure that the bulbs sit properly.
Warning:halogen bulbs overheat, keep them far enough from easily flammable materials (for instance curtains)
If the external flexible cable or cord of this luminaire is damage, it shall be exclusively replaced by the manufacture or his service agent or similar qualified person in order avoid a hazard.
When cleaning the lamps, make sure that the connection elements and conductive parts do not become damp.

Subject to technical modification

Explanation of Safety Classes

= Protection class I. This lamp has an earth terminal. The earth wire (yellow and green) must be connected to the terminal indicated by the symbol .

MOUNTING INSTRUCTION

Mounting Instruction

DECLARATION OF SYMBOLS

Only suitable for GU10 base bulb, no more than 50W.

Warning against the use of cool-beam lamps
Luminaires designed for use with bowl mirror lamps
Replace any cracked protective shield
Symbol No fire ignition
Luminaire designed to be used only with self-shielded tungsten halogen lamps or self-shielded metal halide lamps
Luminaires with internal fuses
When inserting a new bulb avoid touching the bulb with bare fingers.
Not for areas in which moisture-proofing is required
Do not stare at the operating light source
Caution, risk of electric shock
Symbol Luminaires not suitable for direct mounting on normally flammable surfaces (suitable only for mounting on non combustible surfaces)
Luminaires not suitable for covering with thermally insulating material ………
Symbol Please recycle this product after its expiration by returning it to the collection center.