JST XA CONNECTOR 2.5mm pitch Disconnectable Crimp style connectors User Manual
- June 16, 2024
- JST
Table of Contents
- JST XA CONNECTOR 2.5mm pitch Disconnectable Crimp style connectors
- Product Information
- Product Usage Instructions
- XA CONNECTOR (Compatible with glow wire test)
- Specifications
- 〈Through-hole type〉
- Housing
- Through-hole type shrouded header
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JST XA CONNECTOR 2.5mm pitch Disconnectable Crimp style connectors
Product Information
Specifications
- Product Name: XA Connector
- Compatibility: Compatible with CONNECTOR glow wire test
- Pitch: 2.5mm
- Type: Disconnectable Crimp style connectors
- RoHS Compliance: Yes
Product Usage Instructions
Crimping Machine
The crimping machine is required for properly crimping the terminals and
connectors. Please ensure that you have a suitable crimping machine before
proceeding with the following instructions.
Crimping Machine Model: [Crimping machine model name] [Crimping machine description]
Connector Assembly
Terminal Contact Assembly
- Refer to the Model No. chart to determine the appropriate terminal contact model for your application.
- Insert the terminal contact into the housing according to the circuit number and type of entry (top entry, side entry).
- If using a terminal contact with a boss, make sure to align it properly with the housing.
- Repeat the above steps for each terminal contact needed.
Housing Assembly
- Select the appropriate housing model based on the desired circuit number and type of entry (top entry, side entry).
- Insert the terminal contacts into the housing, ensuring they are properly aligned.
- If using a housing with a retainer mountable type, attach the retainer to secure the terminal contacts.
- Repeat the above steps for each housing needed.
FAQ
-
Q: Is the XA Connector compatible with overseas standards?
A: Please contact JST for information regarding overseas standards compatibility. -
Q: Is the XA Connector halogen-free?
A: Please contact JST for information regarding halogen-free products. -
Q: Are there any general instructions or notices to consider when using the XA Connector?
A: Yes, please refer to the General Instruction and Notice section at the end of the catalog for important information on using Terminals and Connectors.
XA CONNECTOR (Compatible with glow wire test)
2.5mm pitch/Disconnectable Crimp style connectors
- Secure locking device
- Solder crack preventive material
- Low insertion force
- Insertion guide mechanism
- Polarizing boss
- Compatible with glow wire test
Specifications
- Current rating: 3A AC DC (AWG #22, #20)
- Voltage rating: 250V AC DC
- Temperature range: -25˚C to +105˚C (including temperature rise in applying electrical current)
- Contact resistance: Initial value/ 10m Ω max.
- After environmental testing/ 20m Ω max.
- Insulation resistance: 1,000M Ω min.
- Withstanding voltage: 1,000V AC/minute
- Applicable wire: AWG #28 to #20
- Applicable PC board thickness: 1.6mm
- Contact JST for overseas standard.
- Compliant with RoHS.
- Contact JST for Halogen-free product, etc.
- Refer to “General Instruction and Notice when using Terminals and Connectors” at the end of this catalog.
〈Through-hole type〉
Note
- The above figure is the figure viewed form the connector mounting side.
- Tolerances are non-cumulative: ±0.05mm for all centers.
- Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
Contact
| Contact | Crimping machine | Applicator |
|---|---|---|
| Crimp applicator | Dies | Crimp applicator with dies |
| SXA-001T-P0.6 | AP-K2N | MKS-L |
| *MKS-SC | SC/SXA/M-001-06 | APLSC SXA/M001-06 |
| SXA-001T-P0.6L | MKS-L | MK/SXA-001-06L |
| *MKS-SC | SC/SXA-001-06L | APLSC SXA001-06L |
| __ Model No. | Applicable wire | __ |
Q’ty / reel
---|---|---
mm2| AWG#| Insulation O.D. (mm)
SXA-001T-P0.6| 0.08～0.33| 28～22| 0.8～1.9| 8,000
SXA-01T-P0.6| 0.22～0.5| 24～20| 1.5～1.9| 8,000
SXA-001T-P0.6L| 0.13～0.33| 26～22| 1.3～1.7| 8,000
Material and Finish
Phosphor bronze, tin-plated (reflow treatment)
RoHS compliance
-
Note :1. SXA-001T-P0.6L is low-insertion force type contact, for easier
insertion/withdrawal, which would be less resistant to the vibration. The crimp height is different from the standard contact. -
Note : 2. Contact JST for gold-plated products.
| Contact | Crimping machine | Applicator |
|---|---|---|
| Crimp applicator | Dies | Crimp applicator with dies |
| SXA-01T-P0.6 | AP-K2N | MKS-L |
| *MKS-SC | SC/SXA/M-01-06 | APLSC SXA/M01-06 |
Note: *Strip-crimp applicator
Housing
| Circuits | Model No. | Dimensions (mm) | Q’ty / bag |
|---|---|---|---|
| A | B | ||
| 2 | XARP-02V-WGT4 | 2.5 | 7.3 |
| 3 | XARP-03V-WGT4 | 5.0 | 9.8 |
| 4 | XARP-04V-WGT4 | 7.5 | 12.3 |
| 5 | XARP-05V-WGT4 | 10.0 | 14.8 |
| 6 | XARP-06V-WGT4 | 12.5 | 17.3 |
| 7 | XARP-07V-WGT4 | 15.0 | 19.8 |
| 8 | XARP-08V-WGT4 | 17.5 | 22.3 |
| 9 | XARP-09V-WGT4 | 20.0 | 24.8 |
| 10 | XARP-10V-WGT4 | 22.5 | 27.3 |
| 11 | XARP-11V-WGT4 | 25.0 | 29.8 |
| 12 | XARP-12V-WGT4 | 27.5 | 32.3 |
| 13 | XARP-13V-WGT4 | 30.0 | 34.8 |
| 14 | XARP-14V-WGT4 | 32.5 | 37.3 |
| 15 | XARP-15V-WGT4 | 35.0 | 39.8 |
Material
PA 66/6, UL94V-0, natural (white)
RoHS compliance
Retainer
| Circuits | Model No. | A | Q’ty / bag |
|---|---|---|---|
| 2 | XMS-02V | 2.5 | 1,000 |
| 3 | XMS-03V | 5.0 | 1,000 |
| 4 | XMS-04V | 7.5 | 1,000 |
| 5 | XMS-05V | 10.0 | 1,000 |
| 6 | XMS-06V | 12.5 | 1,000 |
| 7 | XMS-07V | 15.0 | 1,000 |
| 8 | XMS-08V | 17.5 | 1,000 |
| 9 | XMS-09V | 20.0 | 1,000 |
| 10 | XMS-10V | 22.5 | 1,000 |
| 11 | XMS-11V | 25.0 | 1,000 |
| 12 | XMS-12V | 27.5 | 1,000 |
| 13 | XMS-13V | 30.0 | 1,000 |
| 14 | XMS-14V | 32.5 | 1,000 |
| 15 | XMS-15V | 35.0 | 1,000 |
Material
Glass-filled PA 66, UL94V-0, natural (ivory)
RoHS compliance
Through-hole type shrouded header
Top entry type without a boss
__
Circuits
| Model No.| Dimensions (mm)| __
Q’ty / box
---|---|---|---
Top entry type| A| B
Without a boss| With a boss
2| B02B-XASK-1| B02B-XASK-1-A| 2.5| 7.5| 1,000
3| B03B-XASK-1| B03B-XASK-1-A| 5.0| 10.0| 400
4| B04B-XASK-1| B04B-XASK-1-A| 7.5| 12.5| 400
5| B05B-XASK-1| B05B-XASK-1-A| 10.0| 15.0| 400
6| B06B-XASK-1| B06B-XASK-1-A| 12.5| 17.5| 400
7| B07B-XASK-1| B07B-XASK-1-A| 15.0| 20.0| 250
8| B08B-XASK-1| B08B-XASK-1-A| 17.5| 22.5| 250
9| B09B-XASK-1| B09B-XASK-1-A| 20.0| 25.0| 250
10| B10B-XASK-1| B10B-XASK-1-A| 22.5| 27.5| 250
11| B11B-XASK-1| B11B-XASK-1-A| 25.0| 30.0| 200
12| B12B-XASK-1| B12B-XASK-1-A| 27.5| 32.5| 200
13| B13B-XASK-1| B13B-XASK-1-A| 30.0| 35.0| 100
14| B14B-XASK-1| B14B-XASK-1-A| 32.5| 37.5| 100
15| B15B-XASK-1| B15B-XASK-1-A| 35.0| 40.0| 100
Material and Finish
- Pin : Copper alloy, copper-undercoated, tin-plated (reflow treatment)
- Wafer : Glass-filled PA 66, UL94V-0, natural (ivory)
RoHS compliance This product displays (LF)(SN) on a label. Note: Contact JST for gold-plated products.
Top entry type with a boss
Side entry type with a hook
| Circuits | Model No. | Dimensions (mm) | Q’ty / box |
|---|---|---|---|
| Side entry type with a hook | A | B | D |
| 2 | S02B-XASS-1 | 2.5 | 7.5 |
| 3 | S03B-XASK-1 | 5.0 | 10.0 |
| 4 | S04B-XASK-1 | 7.5 | 12.5 |
| 5 | S05B-XASK-1 | 10.0 | 15.0 |
| 6 | S06B-XASK-1 | 12.5 | 17.5 |
| 7 | S07B-XASK-1 | 15.0 | 20.0 |
| 8 | S08B-XASK-1 | 17.5 | 22.5 |
| 9 | S09B-XASK-1 | 20.0 | 25.0 |
| 10 | S10B-XASK-1 | 22.5 | 27.5 |
| 11 | S11B-XASK-1 | 25.0 | 30.0 |
| 12 | S12B-XASK-1 | 27.5 | 32.5 |
| 13 | S13B-XASK-1 | 30.0 | 35.0 |
| 14 | S14B-XASK-1 | 32.5 | 37.5 |
Material and Finish
Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment)
Wafer: Glass-filled PA 66, UL94V-0, natural (ivory)
RoHS compliance This product displays (LF)(SN) on a label.
Note :
- Dimension D…See PC board layout.
- Contact JST for gold-plated products.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>