JST WC-240 Ratchet Crimp Tool User Guide
- June 15, 2024
- JST
Table of Contents
JST WC-240 Ratchet Crimp Tool
INSTALLATION
- Open the tool.
- Open the flap locator.
- Contact has to be inserted until stop. Please pay attention to the correct cross section.
- Close the flao locator.
- The contact lies in the centre of the respective orofile.
- Insert the cable until insulation stop blade.
- Close the tool.
- Open the tool.
- Loosen the flap locator.
- Remove the crimped contact.
MAINTENANCE
- The tool has to be kept clean and oiled occasionally.
- Referring to the results of the life-time simulation we recommend the exchange of the locator after 1000 cycles at the latest.
- Furthermore we recommend checking the tool regularly by measuring the dimensions indicated in the specifications of the crimped contact.
- Crimp Tool cs 10- wc 240
Application
- For processing Of JST contacts
- SPH-002-PO.5S AWG 30 – 24
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>