Haier HWO60SM6C1BH Oven User Manual

Haier HWO60SM6C1BH Oven

Thank you for choosing one of our products. For the best results, please read this manual carefully and retain it for future reference. Before installing the oven, take note of the serial number, which you may need if any repairs are required. Check that the oven has not been damaged during transportation. If in doubt, consult a qualified technician before using the oven. Keep all packaging materials out of reach of children. When the oven is switched on for the first time, strong-smelling smoke may develop. This is caused by the glue on the insulation panels heating for the first time. If it occurs, do not worry, just wait for the smoke to dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where the instructions contained in this document are not observed.
NOTE : The oven functions, properties and accessories cited in this manual will vary depending on the model you have purchased

Important safety indications

SAFETY INSTRUCTIONS

• Children should not play with the appliance.
• The appliance can be used by those aged 8 or over and by those with limited physical, sensorial or mental capacities, without experience or knowledge of the product, only if supervised or provided with instruction as to the operation of the appliance, in a safe way with awareness of the possible risks.
• Cleaning and maintenance should not be carried out by unsupervised children.
• WARNING: the appliance and accessible parts become hot during use. Be careful not to touch any hot parts.
• WARNING: the accessible parts may become hot during use. Young children should be kept away.
• WARNING: in order to avoid any danger caused by the accidental resetting of the thermal interruption device, the appliance should not be powered by an external switching device, such as a timer, or be connected to a circuit that is regularly switched on and off.
• Children under 8 should be kept at a safe distance from the appliance if not continuously supervised.
• Do not use a steam cleaner or high pressure spray for cleaning operations.
• Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it.

INSTALLATION RECOMMENDATIONS/WARNINGS

• The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The installation instructions for professionally qualified personnel must be followed. Incorrect installation may cause harm or injury to people, animals or belongings. The manufacturer cannot be held responsible for such harm or injury.
• No additional operation/setting is required in order to operate the appliance at the rated frequencies.
• The appliance must not be installed behind a decorative door in order to avoid overheating.
• The oven can be located high in a column. Before fixing, you must ensure good ventilation in the oven space to allow proper circulation of the fresh air required for cooling and protecting the internal parts. Make the openings specified on last page.

ELECTRICAL WARNINGS

• If the oven is provided by the manufacturer without plug: THE APPLIANCE MUST NOT BE CONNECTED TO THE POWER SOURCE USING PLUG OR SOCKETS, BUT MUST BE DIRECTLY CONNECTED TO THE SUPPLY MAINS. The connection to the power source must be carried out by a suitably qualified professional. In order to have an installation compliant to the current safety legislation the oven must be connected only placing an omnipolar breaker, with contact separation compliant to the requirements for overvoltage category III, between the appliance and the power source. The omnipolar breaker must bear the maximum connected load and must be in line with current legislation. The yellow-green earth cable should not be interrupted by the breaker. The omnipolar breaker used for the connection must be easily accessible when the appliance is installed. The connection to the power source must be carried out by a suitably qualified professional considering the polarity of the oven and of the power source. The disconnection must be achieved incorporating a switch in the fixed wiring in accordance with the wiring rules

• If the oven is provided by the manufacturer with plug: The socket must be suitable for the load indicated on the tag and must have ground contact connected and in operation. The earth conductor is yellow-green in colour. This operation should be carried out by a suitably qualified professional. ln case of incompatibility between the socket and the appliance plug, ask a qualified electrician to substitute the socket with another suitable type. The plug and the socket must be conformed to the current norms of the installation country. Connection to the power source can also be made by placing an omnipolar breaker, with contact separation compliant to the requirements for overvoltage category III, between the appliance and the power source that can bear the maximum connected load and that is in line with current legislation. The yellow-green earth cable should not be interrupted by the breaker. The socket or omnipolar breaker used for the connection should be easily accessible when the appliance is installed. The disconnection may be achieved by having the plug accessible or by incorporating a switch in the fixed wiring in accordance with the wiring rules.

• If the power cable is damaged, it should be substituted with a cable or special bundle available from the manufacturer or by contacting the customer service department. The type of power cable must be H05V2V2-F. This operation should be carried out by a suitably qualified professional. The earth conductor (yellow-green) must be approximately 10 mm longer than the other conductors. For any repairs, refer only to the Customer Care Department and request the use of original spare parts.

• Failure to comply with the above can compromise the safety of the appliance and invalidate the guarantee.

• WARNING: the accessible parts can become hot when the grill is in use. Children should be kept at a safe distance.

• Do not use rough or abrasive materials or sharp metal scrapers to clean the oven door glasses, as they can scratch the surface and cause the glass to shatter.

• WARNING: ensure that the appliance is switched off before replacing the lamp, to avoid the possibility of electric shocks.

• The oven must be switched off before removing the removable parts. After cleaning, reassemble them according the instructions.

• Only use the oven for its intended purpose, that is only for the cooking of foods: any other use, for example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot be held responsible for any damage resulting from improper, incorrect or unreasonable usage.

• The use of any electrical appliance implies the observance of some
  fundamental rules:

• Do not pull on the power cable to disconnect the product from the power source;

• Do not touch the appliance with wet or damp hands or feet;

• In general the use of adaptors, multiple sockets and extension cables is not recommended;

• In case of malfunction and/or poor operation, switch off the appliance and do not tamper with it.

• ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS. The power supply to which the oven is connected must conform with the laws in force in the country of installation. The manufacturer accepts no responsibility for any damage caused by the failure to observe these instructions. The oven must be connected to an electrical supply with anearthed wall outlet or a disconnector with multiple poles, depending on the laws in force in the country of installation. The electrical supply should be protected with suitable fuses and the cables used must have a transverse section that can ensure correct supply to the oven.

• CONNECTION. The oven is supplied with a power cable that should only be connected to an electrical supply with 220-240 Vac power between the phases or between the phase and the neutral. Before the oven is connected to the electrical supply , it is important to check power voltage indicated on the gauge and the setting of the disconnector. The grounding wire connected to the oven’s earth terminal must be connected to the earth terminal of the power supply.

• WARNING. Before connecting the oven to the power supply, ask a qualified electrician to check the continuity of the power supply’s earth terminal. The manufacturer accepts no responsibility for any accidents or other problems caused by failure to connect the oven to the earth terminal or by an earth connection that has defective continuity.

• NOTE : as the oven could require mainteinance work, it is advisable to keep another wall socket available so that the oven can be connected to this if it is removed from the space in which it is installed. The power cable must only be substituited by technical service staff or by technicians with equivalent qualifications.

USE RECOMMENDATIONS/WARNINGS

• During cooking, moisture may condense inside the oven cavity or on the glass of the door. This is a normal condition. To reduce this effect, wait 10-15 minutes after turning on the power before putting food inside the oven. ln any case, the condensation disappears when the oven reaches the cooking temperature.
• Cook the vegetables in a container with a lid instead of an open tray.
• Avoid leaving food inside the oven after cooking for more than 15/20 minutes.
• A long power supply failure during an occurring cooking phase may cause a malfunction of the monitor. ln this case contact customer service.
• When you place the shelf inside, make sure that the stop is directed upwards and in the back of the cavity. The shelf must be inserted completely into the cavity.
• WARNING: Do not line the oven walls with aluminium foil or single- use protection available from stores. Aluminium foil or any other protection, in direct contact with the hot enamel, risk melting and deteriorating the enamel of the insides.
• WARNING: Never remove the oven door seal.
• CAUTION: Do not refill the cavity bottom with water during cooking or when the oven is hot.
• When inserting the grid tray pay attention that the anti-slide edge is positioned rearwards and upwards
• Oven trays and grids are not suitable for direct contact with food. Please use suitable cookware or baking paper.
• The dripping tray collects the residues that drip during cooking.

WARNINGS

• Any excess of spilled material should be removed before cleaning.
• WARNING: before cleaning the oven:

1. Clean the oven door;
2. Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use detergents;
3. Remove all accessories and the sliding rack kit (where present);
4. Do not place tea towels.
5. Remove the meat probe from inside the oven.
   • Only use the meat probe recommended for this oven.

STAND-BY
The oven goes in standby after 19 minutes of inactivity. To exit from this condition the ON/OFF button has to be put in OFF and be pressed again. Standby is not activated if:

• a cooking program is running
• the oven is waiting for a programmed cooking.

PRECI PROBE WARNINGS (WIRLESS MEAT PROBE)

• This product is exclusive for oven appliances. It should only be used as described in this User Manual.
• DO NOT TOUCH Preci Probe WITH BARE HANDS JUST AFTER COOKING. Always wear oven gloves to remove Preci Probe from the food after cooking.
• It is required to FULLY INSERT Preci Probe metal bar properlyinto the food until the BLACK ceramic EDGE of it during cooking

• Do not expose the metal part of Preci Probe to the heat generated by oven directly. Do not expose the metal part of Preci Probe to the heat generated by the appliance.
• Do not use Preci Probe in another appliance except for the built-in oven.
• Do not use Preci Probe in a microwave oven.
• Preci Probe can be cleaned and washed but do not immerse it long in water.
• This product is not intended for use by persons with ages 12 and under.
• The supplier will not be liable for any damage of Preci Probe due to misuse of the device.
• Clean the Preci Probe before the use
• Probe can work in this range of temperature: 10 °C to an internal maximum temperature of 100°C of the metal part. Ceramic part can reach 350°C.
• If the Preciprobe temperature exceeds 100°C, cooking will stopand the Preciprobe must be removed from the oven as soon aspossible, wearing gloves, to avoid damage to the probe.

PRECI PROBE

• Before the use verify the charge of the Preci Probe:

1. Put Preci Probe into the charger and close the cover.
2. Connect the charger to a USB power source, such as USB adapter or USB socket of PC/notebook with the USB cable. The charger may not be working properly with power bank because of its auto switch-off function.
3. LED of the charger will turn on and is flashing during charging. It will turn off when Preci Probe is fully charged.

• Verify that Bluetooth of the oven is turned on.
• Make sure the Preci Probe is within the range of monitoring distance. With long distances the Preci Probe cannot be detected by the oven.
• If the Preci Probe is covered by an insulated material doses not communicate with the oven. During standard cooking with probe, the cooking process is interrupted if disconnected. During cooking with recipe and probe, the cooking process continues for the remaining scheduled time if disconnected. During assisted cooking with PreciTaste and probe, the cooking process continues for the last estimated time if disconnected or the internet connection is lost.

PRECI PROBE ERRORS

Probe short failure

|

255°C

|

Probe malfunction

|

1. Contact customer service

---|---|---|---

Probe open failure

|

0°C

|

Probe malfunction

|

1. Contact customer service

Probe over temperature warning|

110°C

| Attention: Temperature detected by probe above the permitted limit| 1. Check the status of the probe and leave to cool down

2.  Contact customer service

Probe under temperature warning|

5°C

| Attention: Temperature detected by probe below the permitted limit| 1. Check the status of the probe and place at room temperature

2.  Contact customer service

Probe far warning

|

-70dB

|

Weak signal

| 1.  The probe may be positioned far from the cooking surface. Move it closer to the surface in use

2.  Contact customer service

Communication lost failure

|

No signal

|

Lost communication with probe

| 1.  The probe may be positioned too far from the cooking surface. To continue to use it, move it closer to the surface

2.  Contact customer service

Probe low charge warning

|

25%

battery

|

Low probe battery

| 1.  The probe battery is low. To continue to use it, place on charge in the designated container. It will charge in just a few minutes

2.  Contact customer service

Probe undercharged warning

|

0%

battery

|

Completely flat battery

| 1.  The probe battery is completely flat. To continue to use it, place on charge in the designated container. It will charge in just a few minutes

2.  Contact customer service

Product description

1. Control panel
2. Shelf positions (lateral wire grid if included)
3. Grids
4. Trays
5. Fan
6. Oven door
7. Lateral wire grids
8. Touch control panel on the door
9. Camera
10. Serial number

ACCESSORIES

• Collects residues that drip when cooking food on the grills.
• Holds baking trays and plates.
  NOTE : Oven trays and grids are not suitable for direct contact with food. Please use suitable cookware or baking paper.

Lateral wire grids

Located on both sides of the oven cavity, holds metal grills and drip pans.

Telescopic guides

Two guide rails which facilitate the cooking status check as they allow easily the extraction and repositioning of trays and grids inside the oven cavity.

Preci Probe (only if present)

Measures the internal temperature of food during cooking.
WARNINGS:

• Do not start cooking before properly inserting the meat probe.
• Do not try to insert the meat probe in frozen food.

Softclose

Hinges which ensure an automatic soft and smooth movement during the closing phase of the oven door.

How the product works

PreciTaste

| The PreciTaste assisted-cooking system requires that the oven be in remote- control mode. To start this function, the oven cavity must be empty. Once the preheating tem- perature has been reached, the food can be placed in the cavity. Remember to close the oven door to enable the food to be detected. The PreciTaste detection process is initiated. After receiving confirmation from the user, the cooking process starts automatically. The cooking time can be extended should you prefer your food more cooked.

Preci Probe

| Preci Probe is a wireless food thermometer that gives home chefs real-time status inside the food to avoid undercook or overcook disasters and ensuring the perfect result every time. It connects directly to the product. Details and the real-time status of the food can be read from your device, giving you the best result at your fingertips.

Use of the appliance

**COOKING MODES ***

• Depending on the oven model.
• Ideal temperature for suggested foods.
• Tested in accordance with the CENELEC EN 60350-1 used for definition of energy class for ventilated function

SPECIAL FUNCTIONS

• Depending on the oven model.
• Ideal temperature for suggested foods.
• Tested in accordance with the CENELEC EN 60350-1 used for definition of energy class for ventilated function.

Cleaning and maintenance

GENERAL NOTES ON CLEANING:
Regular cleaning can extend the lifecycle of your appliance. Wait for the oven to cool before carrying out manual cleaning.

WARNING : Never use abrasive detergents, steel wool or sharp objects for cleaning, as they may irreparably damage enamelled parts. Use only water, soap or bleach-based detergents (ammonia).
GLASS PARTS
Clean the glass oven window with absorbent kitchen towel after every use. For stubborn stains, use a detergent-soaked sponge, wrung out, then rinse with water.

OVEN WINDOW SEAL
If dirty, the seal can be cleaned with a damp sponge.

PRECI PROBE
Clean the probe with a soft damp sponge and, if necessary, some dish soap.

RECOMMENDATIONS:

• After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.
• Do not line the oven walls with aluminium foil or single-use protection available from stores. Aluminium foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the enamel of the insides.
• In addition to the accessories supplied with the oven, we advise you only use dishes and baking moulds resistant to very high temperatures.
• CHANGING LAMP:
• Disconnect the oven from the mains supply.
• Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
• Once the defective bulb is replaced, replace the glass cover.
• NOTE : in the case of a LED lamp oven contact the assistance for changing the light system.

FAQs – Recommendations

ASSISTED COOKING:

1. Undetected food: check that the glass is clean
2. Undetected food: check that the lights (LED+ bulb) are working correctly
3. Undetected food: food in question not included in the recipes present in the system
4. Undetected food: check that the food is not covered by a lid or other material (foil, baking paper, etc.).

REMOTE CONTROL OF THE OVEN

1. Should it not be possible to view the oven from a mobile device, check that the oven is connected to the internet.

PRECI PROBE

1. PreciProbe does not charge at all OR Charge slowly (more than 10 minutes):clean the pin and try to charge again
2. The Preci Probe does not set the oven tothe desired temperature: the probe was notinserted correctly at the start, or the sensoris unable to measure temperature; tryrepositioning the Preci Probe in the food
3. Probe inserted wrongly with the tip offthe food: Temperature felt and displayedon the APP; If the temperature of 100°C is exceeded, the oven will switch off toprevent damage to the probe. Repositionthe probe correctly in the food.

Environmental protection and disposal

SAVING AND RESPECTING THE ENVIRONMENT
Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently as possible, because heat from the cavity disperses every time it is opened. For a significant energy saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and use the residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any heat dispersal outside of the cavity. lf you have an electric contract with an hourly tariff, the “delayed cooking” programme makes energy saving more simple, moving the cooking process to start at the reduced tariff time slot.

WASTE MANAGEMENT AND ENVIRONMENTAL PROTECTION
This appliance is labelled in accordance with European Directive 2012/19/EU regarding electric and electronic appliances (WEEE). The WEEE contain both polluting substances (that can have a negative effect on the environment) and base elements (that can be reused).

It is important that the WEEE undergo specific treatments to correctly remove and dispose of the pollutants and recover all the materials. Individuals can play an important role in ensuring that the WEEE do not become an environmental problem; it is essential to follow a few basic rules:

• The WEEE should not be treated as domestic waste;
• The WEEE should be taken to dedicated collection areas managed by the town council or a registered company.
  In many countries, domestic collections may be available for large WEEEs. When you buy a new appliance, the old one can be returned to thevendor who must accept it free of charge as a one-off, as long as the appliance is of an equivalent type and has the same functions as the purchased appliance.

Installation

If the furniture is coverage with a bottom at the back part, provide an opening for the power supply cable.

References

• Choose your country or region - Haier

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>