BROAIMX 2023 Newest 1080P HD Camera User Guide

BROAIMX 2023 Newest 1080P HD Camera

What’s In The BOX

Model: BF002

Model: BF11

OVERVIEW

Bird Feeder Structure

Camera Structure

How to Remove Camera

• Step 1: Unplug the cable of the solar panel.
• Step 2: Press the camera down to expose the screws on the back of the LI-shaped slot, and turn the screws to easily remove the camera.

Insert TF Card

Bird feeder comes with a built-in card slot that supports up to 128GB TF card. (64G TF Card is included).

1. Step 1: Open the top silicone plug. Insert the TF card. Make sure to plug it in the right direction. (The text icon of the memory card should be aligned with the front facing of the camera, and the smaller end of the card faces down.)
2. Step 2: Finally, cover the silicone plug.
   Note: Please insert the TF card while the camera is turned off. Do not insert the card while the camera is turned on, otherwise, the TF card may not recognize it.

Status LED

1. Boot up: Red light always ON
2. Waiting for network setting: Red light fast blinking
3. Network connecting: Green light fast blinking
4. Network connected: Green light always ON
5. Abnormal status: Red light slowly blinking
6. During firmware upgrade: Yellow light always ON
7. Charging status: White light always ON during charging /Turn OFF after fully charged.

Specification

Bird Feeder Specification

IPCE
Working voltage(Vmp)| 6V± 5%
Working current(lmp)| 400mA± 5%
Open Circuit| 7.2V± 5%
Short-circuit current| 480mA± 5%

Camera Specification

Read Before Installation

1. Keep the Bird Feeder and all accessories out of reach of children and pets.
2. Make sure the camera has been fully charged (DC5V / 2A).
3. Working temperature: -20.5°C to 48.5°C (-4.9° F to 119.3° F) Working relative humidity: 10%-95% non-condensing
4. Please do not expose the camera lens to direct sunlight.
5. The camera has an IP65 waterproof rating, which supports working properly under rain or snow. But it can not be soaked in water.

Note:

1. Bird Feeder only works with 2.4GHz Wi-Fi.
2. Strong lights may interfere with the device’s ability to scan the QR code.
3. Avoid placing the device behind furniture or near microwave products. Try to keep it within range of your Wi-Fi signal.
4. Solar panels are only used for auxiliary power supply and cannot be relied solely on to obtain electricity. The camera needs to be regularly removed and charged.

Set Up with Bird Lover APP
Download the Bird Lover App from the App Store or Google Play. You can also download the App by scanning the QR code above with the QR code scanner on your smartphone.

Assemble Tips

• BF002 Roof Installation
  Use the screwdriver to lock the roof and the body 4 screws, two on the back side, left and right each one.

• BF11 Backside Screwing Demonstration
  Use screws to secure the bottom and body.

Assemble Bird Feeder

Check the following things before you drill holes in your wall or hang in the tree: A smart bird feeder has been successfully added to your Bird Lover App.

Wall Installation:

• Step 1: Use the provided drilling stickers to mark the position of holes on your wall. Use a drill bit to drill 4 holes.
• Step 2: Install the anchors to the screws. (Install on wood skip this step.)
• Step 3: Install the mounting bracket on your wall with the screws provided.
• Step 4: As shown in the picture, put the bracket connector into the bottom of the bracket, and find 3 long screws to install it, and the bird feeder is fixed.
• Step 5: After opening the lid and adding the bird food. As shown in the picture, fastening the 2 short screws can prevent it from being opened by squirrels.

Tree Installation:

• Step 1: Wrap the mounting bracket around the tree with the black strap.
• Step 2: Insert the bird feeder into the mounting bracket.

How to Add Bird Seed

Model: BF002

• Step 1: Use a screwdriver to unscrew the screws and open the cover.
• Step 2: You can add birdseed. Finally, tighten the screws.

Model: BF11

• Step 1: Open up the buckle on the back of the bird feeder, and pull up on the roof to open it.
• Step 2: You can add birdseed. Finally, close the roof back.

APP Interface Introduction

1. Remaining Battery Capacity
2. Quality Adjustment: You can choose HD or SD
3. Voice Switch
4. Zoom in the Screen for Camera
5. Screen Horizontal and Vertical Adjustment
6. Take Photo
7. Bird Recognition
8. Shot Videos
9. Playback of Previous
10. View Photos or Videos Took
11. Check Out the Bird Collection
12. Share the Device
13. Bird Spotting (Switch On/Off Bird Detection Only)
14. Take to the Camera
15. Motion Detection {Click to Turn On/Off)
16. Siren
17. Anti-Flicker
18. Device Volume
19. Notification for Motion Detection
20. Cloud Storage Service
21. History of Bird Identification
22. Back to the Main Page
23. Setting
24. Manual Siren
25. Squirrel Automatic Siren

BROAIMX Free Al Bird Recognition
Al bird recognition has undergone massive machine learning and uses Al intelligent recognition algorithms to inform you in real-time “what species of bird are coming”, automatically save the bird images/video data for you, and also provide bird knowledge learning and so on.

Questions? Need help?

• Customer Support: BROAIMX@163.COM
• Business Cooperation: broaimxofficial@gmail.com
• Technical Support: nextdalini@outlook.com
• https://www.broaimx.com

Get Warranty Extension:

Documents / Resources

| BROAIMX 2023 Newest 1080P HD Camera [pdf] User Guide
2023 Newest 1080P HD Camera, 2023, Newest 1080P HD Camera, 1080P HD Camera, HD Camera, Camera
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>