KOHLER CB-CLC3026FS Two Door Bathroom Medicine Cabinet with Mirror Installation Guide

June 16, 2024
Kohler

KOHLER CB-CLC3026FS Two Door Bathroom Medicine Cabinet with Mirror

Required

KOHLER-CB-CLC3026FS-Two-Door-Bathroom-Medicine-Cabinet-with-Mirror-fig-
\(1\)

Record your model number below for future reference: If you are missing parts, DO NOT RETURN this product to the store. Service parts can be ordered by calling 1-800-4KOHLER (456-4537) or online at www.kohler.com/serviceparts

CAUTION
Risk of electric shock. Electrical wiring may need to be relocated

CAUTION
Risk of property damage. Use anchors (not provided) rated for the load weight of this product. Refer to the anchor manufacturer’s instructions.

NOTICE
Risk of product damage. Do not leave the door supported with only one hinge during the removal or reinstallation. Disengage the bottom hinge first during removal, and reattach the top hinge first during installation.

  1. Verify minimum clearances
  2. Mark the position of the mounting bar. Mark the stud locations.
  3. Drill holes in the groove. One hole must be on a stud location.KOHLER-CB-CLC3026FS-Two-Door-Bathroom-Medicine-Cabinet-with-Mirror-fig- \(5\)
  4. Mark hole locations on the wall. Drill holes. Insert anchors (not provided) where needed.
  5. Secure the bar with two 2” hex head screws or screws provided with the anchors.
  6. If applicable, rotate the cabinet for a right or left door swing.
  7. th help, place and hold the cabinet on the mounting bar
  8. Position the mounting clips. Mark the upper part of the slot.
  9. Set the cabinet aside. Drill holes and insert anchors where needed.
  10. Secure the clips with 2” hex head screws or screws provided with the anchors
  11. Install the side brackets. Remove the backing.
  12. Install the side mirrors. Apply pressure for 20 seconds
  13. Install the shelf clips. Install the shelves
  14. Insert plugs in unused holes
  15. If needed, align the door.

Required
KOHLER-CB-CLC3026FS-Two-Door-Bathroom-Medicine-Cabinet-with-Mirror-fig-
\(18\)
Plus

  • Framing and Drywall Tools
  • 2×3’s or 2×4’s for Framing
  • Drywall and Framing Fasteners

Parts Supplied

Record your model number below for future reference:

STOP
If you are missing parts, DO NOT RETURN this product to the store Service parts can be ordered by calling 1-800-4KOHLER (456-4537) or online at www.kohler.com/serviceparts

CAUTION
Risk of electric shock. Electrical wiring may need to be relocated.

NOTICE
Risk of product damage. The wall cavity must be framed. The cabinet must be secured to the framing studs.

NOTICE
Risk of product damage. Do not leave the door supported with only one hinge during the removal or reinstallation. Disengage the bottom hinge first during removal, and reattach the top hinge first during installation

IMPORTANT
Reroute any electrical wires or water supply piping from the wall cavity. If you encounter drain or vent piping or if your wall is load-bearing, consult a professional before proceeding.

Cutout Dimensions

  1. Verify minimum clearances.
  2. Measure and mark the cutout.
  3. Cut away the drywall.
  4. Frame out the wall cavity.
  5. Secure the drywall to the framing.
  6. If applicable, rotate the cabinet for a right or left door swing.
  7. With help, lift and hold the cabinet in the cutout.
  8. Secure the cabinet to the framing
  9. Install the shelf clips
  10. Install the shelves.
  11. Insert plugs in unused holes.
  12. If needed, align the door

Required

KOHLER-CB-CLC3026FS-Two-Door-Bathroom-Medicine-Cabinet-with-Mirror-fig-
\(33\)

Record your model number
If you are missing parts, DO NOT RETURN this product to the store. Service parts can be ordered by calling 1-800-4KOHLER (456-4537) or online at kohler.com/serviceparts

CAUTION
Risk of electric shock. Electrical wiring may need to be relocated.

CAUTION
Risk of property damage. Use anchors (not provided) rated for the load weight of this product. Refer to the anchor manufacturer’s instructions.

NOTICE
Risk of product damage. Do not leave the door supported with only one hinge during removal or reinstallation. Disengage the bottom hinge first during removal, and reattach the top hinge first during installation.

  1. Verify minimum clearances
  2. Mark the position of the mounting bar. Mark the stud locations
  3. Drill holes in the groove. One hole must be on a stud location.
  4. Mark hole locations on the wall. Drill holes. Insert anchors (not provided) where needed.
  5. Secure the bar with two 2” hex head screws or screws provided with the anchors
  6. If applicable, rotate the cabinet for a right or left door swing
  7. With help, place and hold the cabinet on the mounting bar.
  8. Position the mounting clips. Mark the upper part of the slot.
  9. Set the cabinet aside. Drill holes and insert anchors where needed.
  10. Secure the clips with 2” hex head screws or screws provided with the anchors.
  11. Install the side brackets. Remove the backing.
  12. install the side mirrors. Apply pressure for 20 seconds. Installer les miroirs latéraux. Appliquer une pression pendant 20 secondes.
  13. Install the shelf clips. Install the shelves.
  14. If needed, align the door.

Required

KOHLER-CB-CLC3026FS-Two-Door-Bathroom-Medicine-Cabinet-with-Mirror-fig-
\(49\)

Parts Supplied

Plus

  • Framing and Drywall Tools
  • 2×3’s or 2×4’s for Framing
  • Drywall and Framing Fasteners

Record your model number
If you are missing parts, DO NOT RETURN this product to the store. Service parts can be ordered by calling 1-800-4KOHLER (456-4537) or online at kohler.com/serviceparts

CAUTION
Risk of electric shock. Electrical wiring may need to be relocated.

NOTICE
Risk of product damage. The wall cavity must be framed. The cabinet must be secured to framing studs.

NOTICE
Risk of product damage. Do not leave the door supported with only one hinge during removal or reinstallation. Disengage the bottom hinge first during removal, and reattach the top hinge first during
installation

IMPORTANT
Reroute any electrical wires or water supply piping from the wall cavity. If you encounter drain or vent piping or if your wall is load-bearing, consult a professional before proceeding.

Cutout Dimensions

  1. Verify minimum clearances.
  2. Measure and mark the cutout
  3. Cut away the drywall.
  4. Frame out the wall cavity.
  5. Secure the drywall to the framing. If applicable, rotate the cabinet for a right or left door swing
  6. With help, lift and hold the cabinet in the cutout.KOHLER-CB-CLC3026FS-Two-Door-Bathroom-Medicine-Cabinet-with-Mirror-fig- \(57\)
  7. Secure the cabinet to the framing.
  8. Install the shelf clips.
  9. Install the shelves.
  10. If needed, align the door.

2022 Kohler Co. 1133135-2-L USA/Canada: 1-800-4KOHLER México: 001-800-456-4537 kohler.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Kohler User Manuals

Related Manuals