CE Smith 53680CA 80 Series Standard Flush Mount Rod Holder User Guide

CE Smith 53680CA 80 Series Standard Flush Mount Rod Holder

Specifications

• Model No. 53680CA, 53681CA, 53682CA, 53680SA, 53681SA, 53682SA
• Model No. 536800C, 536810C, 536820C, 536800S, 536810S
• Degree: Cast (for both bottom style and swivel)
• Bottom Style: Liner
• Color: White (for CA models), Black (for C models)

Product Usage Instructions

• Step 1: Preparation
  Before installing the standard flush mount rod holders, make sure you have the necessary tools and equipment:

  • Drill
  • Drill bits (appropriate size for the mounting holes)
  • Screwdriver

• Step 2: Choosing the Mounting Location
  Select a suitable location on your boat where you want to install the rod holder. Ensure that it is easily accessible and provides a secure and stable position for your fishing rod.

• Step 3: Marking and Drilling Holes
  Use a marker or pencil to mark the positions for the mounting holes. The number of mounting holes may vary depending on the model. Refer to the product diagram for specific hole placement.
  Once marked, use a drill with an appropriate bit size to create the mounting holes. Make sure to drill straight and avoid damaging any internal components of your boat.

• Step 4: Mounting the Rod Holder
  Align the mounting holes on the rod holder with the holes on your boat. Insert the screws provided into the holes and tighten them securely using a screwdriver.
  Ensure that the rod holder is firmly attached to your boat and does not move or wobble. Test the stability by gently applying pressure to the holder in different directions.

• Step 5: Testing and Adjusting
  Insert your fishing rod into the rod holder and check if it fits properly. Adjust the angle or position of the rod holder if needed to ensure a comfortable and secure fit for your fishing rod.
  You can also swivel the swivel-type rod holders to adjust the direction of your fishing rod.

• Step 6: Maintenance
  Regularly inspect the rod holders for any signs of damage or wear. Clean them with mild soap and water to remove dirt and debris. Lubricate any moving parts to ensure smooth operation.
  It is also recommended to remove the rod holders during periods of extended non-use or when storing your boat to prevent damage.

USING INSTRUCTION

80 Series Standard Flush Mount Rod Holder

• 316L Stainless steel
• 1-7/8” Inner diameter
• Fits 2-1/2” hole diameter
• Cap size 5-1/8” long x 4-1/4” wide
• 10-1/2” Tube length
• 1/4” wide x 1/2” tall gimbal bar
• Cast models feature a 1/2” drain hole
• Liner runs the full length of the tube

80 Series Standard Flush Mount Rod Holder No Logos

• 316L Stainless steel
• 1-7/8” Inner diameter
• Fits 2-1/2” hole diameter
• Cap size 5-1/8” long x 4-1/4” wide
• 10-1/2” Tube length
• 1/4” wide x 1/2” tall gimbal bar
• Cast models feature a 1/2” drain hole
• No logo on the cap for a sleek profile
• Liner runs the full length of the tube

FAQ

• Q: Can I install these rod holders on any type of boat?
  • A: These standard flush mount rod holders are designed to be compatible with most boats. However, it is important to ensure that you have a suitable mounting location and that the installation does not interfere with any other components or structures of your boat.
• Q: Are these rod holders suitable for saltwater fishing?
  • A: Yes, these rod holders are made from durable materials and can withstand saltwater conditions. However, it is recommended to rinse them with fresh water after each use in saltwater to prevent corrosion.
• Q: Can I use these rod holders for other purposes?
  • A: While these rod holders are primarily designed for fishing rods, they can also be used to hold other items such as boat hooks or flag poles, as long as they fit securely and do not exceed the weight capacity of the rod holder.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>