CE Smith 53688C Screwless Flush Mount Rod Holder User Guide
- June 16, 2024
- CE Smith
Table of Contents
CE Smith 53688C Screwless Flush Mount Rod Holder
Product Information
Specifications
- Model No: 53696
- Available Models: 53686C, 53687C, 53688C, 53686S, 53687S
- Degree Bottom Style: Cast
- Liner Color: Black
- Swivel Model : Black
Product Usage Instructions
Mounting the Rod Holders To install the Screwless Flush Mount Rod Holders, follow these steps:
- Choose a suitable location on your boat’s gunwale or rod rack where you want to mount the rod holders.
- Ensure that the mounting surface is clean and free from any debris.
- Place the rod holder against the mounting surface and mark the holes for drilling.
- Drill pilot holes at the marked locations using an appropriate drill bit size.
- Align the rod holder with the pilot holes and insert the provided screws through the mounting holes.
- Tighten the screws firmly to secure the rod holder in place.
Adjusting the Swivel Model If you have a swivel model (53686S or 53687S), you can adjust its swivel angle. Follow these steps:
- Loosen the swivel lock located at the base of the rod holder.
- Rotate the rod holder to the desired swivel angle.
- Tighten the swivel lock to secure the rod holder in the adjusted position.
Frequently Asked Questions (FAQ)
- Q: Can these rod holders be used for saltwater fishing?
- A : Yes, these rod holders are designed for both freshwater and saltwater fishing.
- Q : Can I paint the rod holders to match my boat’s color?
- A: It is not recommended to paint the rod holders, as it may affect their performance and durability. They are already available in black color, which suits most boat designs.
- Q : Are mounting screws included with the rod holders?
- A: Yes, mounting screws are provided with the rod holders for easy installation.
- Q : Can I use these rod holders on a kayak?
- A : These rod holders are primarily designed for boats and may not be suitable for kayaks. It is recommended to check with the kayak manufacturer or consult a professional for kayak-specific rod holders.
Rod Safety Ring
- 316L Stainless Steel
- Fits cast bottom rod holders with 1/2” drain
- Provides a convenient place to secure rods
- Model No. 53696
80 Series Screwless Flush Mount Rod Holder
- 316L Stainless steel
- 1-7/8” Inner diameter
- 2-5/8” Outer diameter
- Fits 2-9/16” hole diameter
- Cap size 5-1/8” long x 4-1/4” wide
- 10” Tube length
- 1/4” wide x 1/2” tall gimbal bar
- Cast models feature a 1/2” drain hole
- No logo on the cap for a sleek profile
- The liner runs the full length of the tube
- Each rod holder includes a backing plate and installation nut
- Installation requires Model # 53689 Installation Socket
| Model No. | Degree | Bottom Style | Liner Color |
|---|---|---|---|
| 53686C | 0º | Cast | Black |
| 53687C | 15º | Cast | Black |
| 53688C | 30º | Cast | Black |
| 53686S | 0º | Swivel | Black |
| 53687S | 15º | Swivel | Black |
Drop-In Swivel
- 316L Stainless Steel
- Fits rod holders with 1-9/16” or larger inner diameter
- Instantly converts any rod holder to a swivel rod holder
- Adjustable swivel resistance
- Model No. 53690A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>