ifi Mercury Audiophile Grade 0.5 Meter USB A to B Cable Instruction Manual
- June 16, 2024
- ifi
Table of Contents
ifi Mercury Audiophile Grade 0.5 Meter USB A to B Cable
Product Information
Specifications
-
Compatible with High-Speed USB 2.0 (32bit/768kHz and higher
supported) -
Conductors: Heavy OHFC continuous-cast copper
-
Insulation: Polyethylene
-
Shielding: Dual-shields
-
Connectors: iFiFINALUSB connectors
-
Lengths/Weights:
- 0.5m / 92g (0.20 lbs)
- 1.0m / 112g (0.25 lbs)
-
Warranty period: 12 months
Product Usage Instructions
Step 1: USB A connector
Please insert the FINAL USB type A connector into the computer or iUSB
Power labeled ‘A’.
Step 2: USBB connector
The FINAL USB type ‘B’ connector labeled ‘iFi’ should be inserted into the
type ‘B’ port of the DAC or the iPurifier (which is then inserted into the
DAC).
Step 3: RF3 Silencers
All USB cables pick up and radiate radio frequencies that can negatively
impact sonic performance. The Mercury USB cable is equipped with 3 sets of RF3
Silencers. Two of them should be located at each respective end of the cable.
Adjusting the central, 3rd Silencer
- Feel free to adjust the central, 3rd Silencer to attain optimal sonic performance for a given situation.
Tip : To start with, set this 3rd RF Silencer to the ‘Golden Ratio’, with the shorter section closer to the USB ‘B’ connector (item 3 above).
FAQ
- How do I activate the warranty for this iFi product?
To activate the warranty for this iFi product, you must register with the iFi website.
USB “A” connector
- Please insert the FINAL USB type “A” connector into the computer or iUSB Power labeled‘’ “
USB “B” connector
- The FINAL USB type ‘’B’’ connector labelled ‘iFi’ please inserted into the type ‘’B’’ port of the DAC or the iPurifier (which is then inserted into the DAC).
RF Silencers
-
All USB cables due to their inherent nature inevitably pick up AND radiate radio frequencies that negatively impact the sonic performance.
-
On the Mercury USB cable, there are 3 sets of R 3F Silencers. Two are best located at each respective end.
Note : The custom-designed metal oxide ceramic RF silencers offer different permeabilities. Compared to generic filters this atypical approach is incredibly effective; over the widest frequency range. -
Feel free to adjust the central, r3 Sd silencer to attain the optimal sonic performance for a given situation.
Tip : To start with, set this 3 Rrd F Silencer to the ‘Golden Ratio’, with the shorter section closer to the USB ‘B’ connector (item 3 above).
Specifications
- Compatible with High-Speed USB 2.0 (32bit/768kHz and higher supported)
- Conductors: Heavy OHFC continuous-cast copper
- Insulation: Polyethylene
- Shielding: Dual-shields
- Connectors: iFi” FINAL” USB connectors
- Lengths/Weights: 0.5m / 92g (0.20 lbs) 1.0m / 112g (0.25 lbs)
- Warranty period: 12 months
warranty
To activate the warranty for this iFi product, you must register with the iFi website.
- Component :
- Serial no:
Terms & Conditions
iFi guarantees that this iFi product shall be free from defects in materials and workmanship for 1 year for parts and labor. The warranty period begins at the date of retail sale by an authorized iFi distributor/dealer and is subject to the following requirements and understandings:
- It is the responsibility of the buyer within 30 days from the original sale, to register and activate the product warranty with the iFi website.
- The original invoice must be produced for authentication before any warranty claim.
- The iFi product must not have been modified in any manner whatsoever, or the warranty will immediately become void.
- The iFi warranty is only valid in the country of the original sale.
- The product must not have been stored in a humid environment; nor subjected to weather, water, or saltwater spray.
- iFi shall not, under any circumstances, be liable for any incidental or consequential damages arising from the loss of property or other damage or losses due to the failure of an iFi product. iFi is not liable for loss of use or inconvenience caused by the failure of an iFi product. iFi is not liable for damage caused to other audio components because of the failure of an iFi product.
- During the warranty period, iFi will repair the product to working order, or, at iFi’s option, replace the defective module with a similar available product.
- All repairs performed after the expiry of the warranty period will be charged to the owner and will carry a 180-day warranty on parts and labor. The customer is responsible for shipping the unit to the iFi distributor in the original packaging. This includes the payment of any shipping charges and related taxes.
- Should any warranty issues arise, the decision of iFi is full and final.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>