PHILIPS TD2801 Corded Phone Instruction Manual

PHILIPS TD2801 Corded Phone

Product Information

Specifications

• Product Type: Corded Phone
• Model Number: TD2801
• Manufacturer: Philips
• Website: www.philips.com/welcome

Product Usage Instructions

Safety Precautions
Before using the corded phone, please read and follow these safety precautions:

• Keep away from liquids to prevent electrical shock.
• Avoid placing the phone in areas with high humidity or moisture.
• Do not use the phone near water sources such as sinks or bathtubs.
• Ensure the phone is placed on a stable surface to avoid accidental falls.
• Do not expose the phone to extreme temperatures.

Installation
To install the corded phone, follow these steps:

1. Choose a suitable location for the phone, preferably near a telephone line jack.
2. Connect one end of the telephone line cord to the telephone line jack on the wall and the other end to the LINE port at the back of the corded phone.
3. Plug the power adapter into an electrical outlet and connect it to the POWER port on the back of the phone.
4. Wait for the phone to power on and establish a connection with the telephone line.

Basic Phone Usage
Once the corded phone is installed, you can use it for basic phone functions:

• To make a call, lift the handset and dial the desired phone number using the numeric keypad. Press the CALL or SEND button to initiate the call.
• To answer an incoming call, simply lift the handset.
• To end a call, press the END or HANG UP button.
• Adjust the volume using the volume control buttons located on the side of the phone.

Frequently Asked Questions (FAQ)

• Q: Can I use this corded phone with a VoIP service?
  A: This corded phone is designed for use with a traditional telephone line and may not be compatible with VoIP services. Please check with your VoIP service provider for compatibility.

• Q: Can I connect a headset to this corded phone?
  A: No, this corded phone does not have a dedicated headset jack. It is designed for use with the included handset only.

• Q: How can I adjust the ringer volume?
  A: The ringer volume can be adjusted using the volume control buttons located on the side of the phone. Refer to the user manual for detailed instructions.

What‘s in the box

Overview

1. Microphone
2. 3 speed dial keys
3. Number keys
4. Settings
5. Extract
6. Hook switch
7. Earpiece
8. Redial
9. Transfer
10. Incoming call indicator
11. Ringer switch
12. Ringer speaker
13. Mute

Connect

Get started

1. To wall mount the phone, drill two screws into the wall vertically. The distance between the screws is 10cm.
   • Hang the base station on the screws. (See figure below)
   • Install height: no higher than 2.0M
2. Plug the other end of the handset coil cord into the telephone socket on the wall. Connection is successful when you hear a signal tone.
3. To hold a call, hang the handset on the call hold hook on the base station.

Operate

1. Answer a call: When the phone rings, pick up the handset to answer the call.

2. Make a call: Pick up the handset and dial the number you want to call. If you hear a busy tone, hang up the handset to end the call. Redial the number or press the “ ” key to make the call again.

3. Memory dialing: For speed dialing, this phone can store phone numbers respectively in the memory locations of “1-9, 0, ” keys. Operation as follows:

   • Store numbers into memory: Pick up the handset
   • Press “ ” → enter a number (e.g. 63541088)
   • Press” ” → press any key (“1-9, 0, M1, M2, M3”) for the memory location where you want to store the number → Hang up. (To facilitate the dialing, please write down the numbers stored in the memory on the writing paper on the base station)
   • Direct memory dialing: Pick up the handset and press the” ” key to dial the corresponding number stored.
   • Indirect memory dialing: Pick up the handset → press “ ” → press a number key (“1-9, 0”) to dial the corresponding number stored.
     Note: When a new number is stored in the memory location of a key, the old number will be automatically deleted.

4. Mute function: When on a call, press and hold the “Mute” key on the left of the handset, the other party will not hear you. Release the key to return to the call.

5. Adjust the ringer volume or turn the ringer off: Use the ringer switch on the right of the handset to adjust the ringer volume or turn the ringer off.

6. Pause while dialing: The “ ” key of this phone has dual functions: redial and pause. Before you dial a number, press the key to redial. While you are dialing, press the key to enter a pause.
   If the subscriber you dialed is busy, hang up the handset to end the call, then press “ ” to redial the number. (Note: The purpose of inserting a pause is to isolate the prompt tone. Each time the key is pressed, a delay of 3 seconds will be added before the phone dials the number)

7. Transfer a call: This service is network-dependent.
   Check with the service provider for additional charges.

   • »Make a first call.
   • »Press during a call.
   • Make a second call.
   • Hang up the handset when the other side answers the call. The first call is transferred to the second call.

Technical data

• Working conditions
  • Ambient temperature: 0℃ to 40℃
  • The total distortion caused by harmonic intermodulation is at least 20dB lower than the fundamental level
• Sound
  • Ringtones: High, Low, Off
• Convenience
  • LED: Yes, for incoming call
  • Wall mountable
• Memory Capacity
  • Speed dial: M1, M2, M3
  • Memory dial: 10
  • Memory in total: 13

Frequently asked questions

• No dialing tone
  • Make sure your phone is properly connected to the line cord.
• No voice from the receiver or no voice transmission
  • Make sure the handset is properly connected to the base through the coil cord.
• The caller ID does not display
  • The service is not activated. Check with your service provider.
  • The caller’s information is withheld or unavailable.
• No display
  • Make sure there are power and phone connections.

To access the user instructions online, use the reference model number written on the product label at the bottom of the base station.

www.philips.com/support

2023 © MMD Hong Kong Holding Limited. All rights reserved. Specifications are subject to change without notice.

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor to this product.

www.philips.com/welcome.

References

• Philips - United States | Philips
• Philips Customer Service Support - Home | Philips

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>