tempus Ethernet Switch User Guide
- June 16, 2024
- TEMPUS
Table of Contents
tempus Ethernet Switch
Product Information
Specifications
- Brand: Network Acoustics
- Model: Tempus Ethernet Switch
- Country of Origin: Made in the UK
- Power Supply: Hybrid Power Supply (included)
- DC Power Cable: Network Acoustics Reference DC Power Cable (included)
- Mains Power Cable: Included (specific to your region)
- Power Input: DC 12V
- Ethernet Ports: 2 x 100Mb/s RJ45, 6 x 1Gb/s RJ45
- SFP Ports: 4 (for use with future products)
- LED Operation Light: Yes
Installation
- Position the tempus Ethernet Switch and Hybrid Power Supply on a stable surface in a ventilated position.
- Insert the round 3-pin DC connector of the DC Cable into the ‘DC OUTPUT’ socket on the rear of the hybrid power supply and tighten the locking ring.
- Insert the barrel connector on the other end of the DC Cable into the DC 12V socket on the rear of the tempus Ethernet switch.
- Connect the power supply to the mains power, then turn on the power supply using the switch located next to the mains input on the rear panel. The green LED will illuminate.
- The Ethernet Switch will now boot up. During this process, the LED on the rear of the Switch will flash, becoming permanent/solid after approximately 1 minute.
Connect Tempus to Your Router and network Devices
- Using a good quality Ethernet cable, connect one end to an Ethernet port on your router.
- Connect the other end of the cable to one of the six 1Gb/s ports on the rear of the tempus Ethernet Switch.
Connect Network Devices to tempus
We recommend connecting all your network devices to one of the 1Gb/s ports
unless you have a Streamer or Server which is specifically designed to operate
at 100 Mb/s.
- Music Server/NAS
- Smart TV
- Wifi Router
- Connected to 1Gb/s Port
- Video Server
- TV Streamer
- Apple TV / Roku / Sky Receiver/ Amazon Fire
- Music Streamer/DAC
Usage Warnings
- This product is not waterproof. To prevent fire or electric hazards, do not place any containers filled with liquid near this equipment or expose it to dripping, splashing, rain or moisture.
- To prevent fire hazards, do not place any naked flame sources on or near the product.
- The enclosure of the product acts as a heatsink to keep the product cool. Leave adequate space around the product to allow free movement of air. Do not place other equipment directly on the top cover of the enclosure.
Support
For product support, FAQs and additional information, please visit:
networkacoustics.com
FAQ
-
Q: How many Ethernet ports does the tempus Ethernet Switch have?
A: The tempus Ethernet Switch has a total of 8 Ethernet ports. There are 2 x 100Mb/s RJ45 ports, 6 x 1Gb/s RJ45 ports. -
Q: Can I connect my network devices to the SFP ports?
A: No, the SFP ports are for future products and not currently used for connecting network devices. -
Q: Is the power supply included with the tempus Ethernet Switch?
A: Yes, the tempus Ethernet Switch comes with a Hybrid Power Supply and the necessary DC Power Cable and Mains Power Cable for your region. -
Q: Can I use the tempus Ethernet Switch with devices that operate at 100Mb/s?
A: Yes, you can connect devices that operate at 100Mb/s to the tempus Ethernet Switch. However, it is recommended to connect them to the specific 100Mb/s RJ45 ports if available.
Thank you for choosing the tempus Ethernet Switch.
This quick start guide will provide you with step-by-step instructions on how
to connect, get started and use your tempus Ethernet Switch.
If you have any questions please contact us via
info@networkacoustics.com and we will be
happy to assist you.
Box Contents
Rear Panel Connections
Installation
- Position the tempus Ethernet Switch and Hybrid Power Supply on a stable surface in a ventilated position.
- Insert the round 3-pin DC connector of the DC Cable into the ‘DC OUTPUT’ socket on the rear of the hybrid power supply and tighten the locking ring.
- Insert the barrel connector on the other end of the DC Cable into the DC 12V socket on the rear of the tempus Ethernet switch.
- Connect the power supply to the mains power, then turn on the power supply using the switch located next to the mains input on the rear panel. The green LED will illuminate.
- The Ethernet Switch will now boot up. During this process, the LED on the rear of the Switch will flash, becoming permanent/solid after approximately 1 minute.
Connection
Connect tempus To Your Router & Network Devices
-
Connect To Router
Using a good quality Ethernet cable, connect one end to an Ethernet port on your router, then connect the other end of the cable to one of the six 1GB/s ports on the rear of the tempus Ethernet Switch. -
Connect Network Devices
We recommend connecting all your network devices to one of the 1Gb/s ports unless you have a Streamer or Server which is specifically designed to operate at 100 Mb/s.
Connect Network Devices To tempus
Usage Warnings
- This product is not waterproof. To prevent fire or electric hazards, do not place any containers filled with liquid near this equipment or expose it to dripping, splashing, rain or moisture.
- To prevent fire hazards, do not place any naked flame sources on or near the product.
- The enclosure of the product acts as a heatsink to keep the product cool. Leave adequate space around the product to allow free movement of air. Do not place other equipment directly on the top cover of the enclosure.
Operating Environment Temperature & Humidity
+5°C to +35°C (+41°F to +95°F)
Less than 80% Relative Humidity
Do not install this unit in a poorly ventilated area, or in locations exposed
to high humidity or direct sunlight.
Support
For product support, FAQs and additional information please visit:
networkacoustics.com