Snuz PSP4008 Series Pod 4 Baby Bedside Crib

Product Information

• Specifications
  • Conforms to Standards:
  • BS EN 1130:2019 & BS EN 16890:2017
  • Designed in Great Britain
  • Made in China
• Tel:
  • 0800 028 1433
  • +44 (0)1789 734 021
• Email:
  • [email protected].
• General Customer Service:
  • [email protected].

Product Usage Instructions

• Section 1: Safety Precautions
  • Before using the product, it is important to read and understand the following safety precautions:
  • Ensure that the bed height is within the specified range mentioned in the manual.
  • The head of the child in the bassinet should never be lower than the body of the child.
  • Bedside sleepers should never be used in an inclined position.
  • The reflux leg may only be used when the SnuzPod is used as a standalone crib and where the zip-down wall is zipped up/closed.
  • Do not use the reflux leg during periods of sleep.
• Section 2: Assembly
  • Follow these steps to assemble the product:
  • Check that all the parts mentioned in the manual are included in the box.
  • If any part is missing or defective, please email [email protected]. for assistance.
  • Refer to the illustrations in the manual for guidance during assembly.
  • Measure your bed height according to the instructions provided.
  • Attach the stand to the bedside crib as shown in S.3 and S.4.
  • Attach the required parts as indicated in S.5 and S.6.
  • Attach the bassinet as shown in B.1 and B.2.
  • Attach the reflux leg, if applicable, as shown in R.1.
  • Ensure that all parts are securely attached before use.
• Section 3: Usage
  • Follow these guidelines for using the product:
  • Place the assembled bedside crib next to your bed.
  • Ensure the bassinet is securely attached to the crib.
  • Place your child in the bassinet with their head level or higher than their body.
  • Do not leave the child unattended while in the crib.
  • Refer to the manual for additional usage instructions and guidelines.
• Frequently Asked Questions (FAQ)
  • Q: What are the standards this product conforms to?
  • A: This product conforms to BS EN 1130:2019 & BS EN 16890:2017 standards.
  • Q: Where was this product designed and manufactured?
  • A: This product was designed in Great Britain and manufactured in China.
  • Q: How can I contact customer service for assistance?
  • A: You can contact our customer service team by calling Tel: 0800 028 1433 or +44 (0)1789 734 021. You can also email us at [email protected] for general inquiries or [email protected] for any missing or defective parts.

IMPORTANT: KEEP FOR FUTURE REFERENCE. READ CAREFULLY. Congratulations on your new arrival and welcome to the Snüz family.

Your guide to building your new SnüzPod, and keeping it as a safe and happy space to sleep

• We know you can’t wait to use your new SnüzPod4, but it is important to carefully read this guide for assembly & usage before use.
• Please be aware, that incorrect use of this crib can be dangerous, and we want happy, safe and sleepy snüzing.
• Please put this somewhere safe and keep it for future reference.
• For any help or advice, do not hesitate to call our helpline +44 (0)1789 734 021.
• These illustrations are to be used as a guide only.

What’s in the box

Parts

If there is any part missing or defective please email [email protected].

And you will also need

Measure your bed

Stand

Bassinet

Reflux leg

• The head of the child in the bassinet should never be lower than the body of the child.
• Bedside sleepers shall never be used in an inclined position.
• The reflux leg may only be used when the SnuzPod⁴ is used as a standalone crib and where the zip-down wall is zipped up / closed.
• Do not use the reflux leg during periods of sleep.

Using SnüzPod in Bedside Mode (fastened to bed)

When attached to your bed, SnüzPod⁴ has a permanent half-height wall to meet the new bedside crib standard BS EN 1130:2019.

1. Follow the instructions below to fit the straps to your bed – these will be tightened later.
   • Use the attachment system provided.
   • Do not use another attachment system.
   • Frame style bed
   • Divan or solid bed base
2. Remove the metal pole from the zip-down wall.
   • Leaving the pole in situ could be hazardous.
   • Always retain the metal pole in the rear wall (the wall furthest away from your bed).
3. Release the velcro tabs and lower the zips fully. Fold the zip-down wall down, tucking it in between the crib frame and the adult mattress.
4. Ensure that your mattress is level with the top of the zip-down wall of the SnüzPod⁴.
5. Tighten the straps to secure the SnüzPod⁴ to your bed.
   • Ensure that the bassinet sits fully down on the stand and is not resting on any part of the parents’ bed.
   • Do not over-tighten the strap, as this may cause the stand to tilt. Ensure that the stand is flush with your bed frame/base.
   • Check the tightness of the attachment system before each use by pulling the bedside sleeper in a direction away from the adult bed.
   • Tuck any excess strap under your bed base, away from babies and children.
   • WARNING: Ensure there are no gaps between the SnüzPod and the adult’s bed.
   • WARNING: During use, always ensure that the parents’ bedding, sheets, blankets etc. do not enter or cover the inside of the crib.

IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.

Please take the time to carefully read the following warnings and recommendations, which are provided to keep your baby safe, whilst in your SnüzPod4 and also maintain safe, and proper use.

General Use

REMEMBER: YOUR BABY’S SAFETY IS YOUR RESPONSIBILITY.

• WARNING: Do not use this product without reading the instructions for use first.
• WARNING: Stop using the product as soon as the child can sit kneel or pull himself up. This product is only suitable for a child who cannot sit up unaided.
• WARNING: Placing additional items in the product may cause suffocation.
• WARNING: Do not place the product close to another product, which could present a danger of suffocation or strangulation, e.g. strings, blind/ curtain cords, etc.
• WARNING: Do not use the product with more than one child at a time.
• WARNING: Do not use the bassinet without the fabric bag.
• WARNING: Do not use bassinet/fabric bag without the ComfortAir liner.
• WARNING: Choking hazard – keep loose screws out of reach of children.
• WARNING: Keep metal poles away from babies and children.
• WARNING: Be aware of the risk of burning cigarettes, open fires and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the crib.
  • The maximum recommended weight of a child is 9KG (20 lbs).
  • DO NOT use a crib if any parts are missing, torn, damaged, or broken. Contact Snüz for replacement parts and instructional literature if needed.
  • DO NOT substitute parts. Only use replacement parts supplied or approved by the manufacturer.
  • Do not allow pets or other children to be left unattended/play unsupervised near the crib/bassinet and stand.
  • Only use on a firm, horizontal level, and dry floor.
  • The baby should be removed from the crib/bassinet before any adjustment is made to the product.
  • The baby should be removed from the crib/bassinet before the product is carried or moved.
  • We do not recommend using sleep positioners with this product and as per the guidance of safe sleep experts, only use a firm, flat mattress recommended specifically for use with the product.
  • Only use the stand provided and ensure that the bassinet is securely fixed onto the stand when used as a crib or bedside crib.

Bedside Use

• WARNING: To avoid hazards from the child’s neck being caught on the top rail on the side that is next to the adult bed, the top rail must not be higher than the adult bed mattress.
• WARNING: To avoid the risk of your child being strangled, the attachment system to the adult’s bed shall always be kept away from and out of the crib.
• DANGER! Always completely raise the zip-down wall when not attached to the adult’s bed or when used as a bassinet. Ensure both zips are fully closed, tabs sealed and the metal poles (front and rear) are in situ.
• WARNING: The SnüzPod⁴ is not suitable for use with the following: folding or sofa beds, guest beds, high sleeper or low floor beds with protruding frames including futon beds, antique beds and water beds.
• WARNING: During use, always ensure that the parents’ bedding, sheets, blankets etc. do not enter or cover the inside of the crib.
  • Suitable for use with beds where the top surface of the adult mattress is a maximum of 73cm from the floor.
  • The SnüzPod⁴ should not be used as a bedside crib outside of the guide height shown in these instructions.
  • There shall never be a gap between the lower side of the bedside crib and the mattress of the adult bed.
  • If there is any gap between the SnüzPod⁴ and the adult bed when in bedside sleeper mode, DO NOT use this product.
  • Gaps should not be filled with pillows, blankets or other items.
  • To prevent suffocation, the crib should be securely attached to the adult’s bed using the straps provided only.
  • Ensure the stand is securely attached to the bed frame in line with the user guide and ensure all excess strap material and poles are kept away from babies and children.
  • When used in bedside crib mode, have the zip-down wall tucked in between the crib frame and the adult mattress.
  • Always remove the metal pole from the zip-down wall, to allow the wall to fully drop down. Leaving the pole in situ could be hazardous.

Mattress

• WARNING: Do not use more than one mattress in the product.
• The recommended mattress size for the crib is 75.5cm x 40cm x 3cm thick. Always ensure that the mattress height does not exceed 3cm. The top of any mattress used should not be higher than the mark on the inside of the bassinet leg a small notch 1cm long. You may need to move the bag aside to see this fully. Ensure the internal dimensions of the crib are no greater than 2cm larger than the length and width of your mattress.

Caring for your SnuzPod⁴

• Check your SnüzPod⁴ regularly. All assembly fittings should always be tightened properly and care should be taken that no screws are loose, because a child could trap parts of the body or clothing (e.g. strings, necklaces, ribbons for babies’ dummies, etc.), which would pose a risk of strangulation.
• Regularly check that the fabric bag is securely and properly attached to the bassinet – before every use; ensuring that the poppers and metal poles are in situ.
• Regularly hand-tighten screws, avoiding over-tightening as this may cause cross-threading and damage.
• Do not dry clean. Your SnüzPod⁴ can be wiped/sponged clean with a mild detergent.
• The fabric bag can be removed from the frame, and hand washed according to the fabric bag care label. The ComfortAir liner can be machine-washed according to the care label.
• This is a natural product and may be affected by extremely dry, humid, or damp atmospheres.
• Store away from direct heat, or away from places of extreme temperature fluctuations such as roof attics, outside walls, or near single-glazed windows.
• THE QUEEN’S AWARDS FOR ENTERPRISE: INNOVATION
  • @snuzuk

  • snuzpod.

References

• snuz.co
• Shop Official Home of SnuzPod, SnuzKot & SnuzPouch | Snüz
• Register | Snüz

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>