Shenzhen Rongjing Electronics K02 Wireless Keyboard Instructions

Shenzhen Rongjing Electronics K02 Wireless Keyboard

Keyboard instruction

Keyboard connection operation:

1.  Turn on the power supply, and the green indicator light will be lit for one second (if the instruction is red, please charge in time).Press the matching key “Fn+C/ ” for 1 second, the Wireless indicator lights flicker into the pairing state, and the effective time is about 120 seconds.Open the Wireless search function of the external device, click the “Wireless Keyboard” searched. After the pairing is successful, the indicator lights go out, and you can use the keyboard.
2.  If there is no operation in 10 minutes, the keyboard will go to sleep state and wait for 2~3 seconds by any key to wake up.
   Note: please refer to the following instructions according to the actual functions of the keyboard: (Partial product support) Please select the input program from the system of the corresponding device, press “FN+And/ Win/ IOS” for 1 second to switch, And the Bluetooth light will light up when the switch is successful.Fn+And is converted to Android; Fn+Win is converted to Windows; Fn+iOS is converted to iOS.

Disconnect the keyboard connection:

• If you want to break the connection between keyboard and device, please clear the pairing information in the device, or turn off the keyboard power directly.

Electricity indicator:

• If the power indicator light is red slowly, the power is low, please charge it in time, the red light is bright when charging. When the indicator is green, it is full, please disconnect the charging power to ensure safety.

Function key: when the key has more than one character or function icon, press Fn or Fn+Shift.
Note:   Based on the open-source nature of the operating system, different brands of devices may have some function keys inconsistent with the table or unresponsive. Unusual characters in IOS system please use with Alt or Alt+Shift, Please use the WIN/AND system with Alt Gr.

Please refer to **the following instructions according to the actual

functions of purchased products : (Partial product support)**

Touch the mouse : Different operating systems, gesture commands will be different, pleaserefer to the actual situation of the product

This icon indicates that the keyboard supports luminous function

:(Partial product support)

By pressing this icon key, you can (turn on/Adjust the brightness/turn off) the luminous function of the keyboard.If in the off state, press to turn on the luminescence, then press the brightness to increase
30%, then press the brightness to increase 30% again, then press again to turn off the luminescence; Loop through FN+ can adjust the luminous color and switch between different colors in turn.

Note:
If the light can not be lit, or immediately after the light off, please timely charge; If the battery capacity is below 20%, the keyboard will force this function off.

Special notes:

The battery life of the keyboard with a luminous function is about 3-6 hours when the battery capacity is 100% (related to luminous brightness). Turn off the light for about 300 hours.

Basic parameters: (part of the parameters are objective factors will vary).

Maintenance and warning:

• Do not squeeze or twist, clap the keyboard.
• Do not scan the microwave and get away from the magnetic field.
• Away from the liquid and used in a dry environment.
• Clean the keyboard with soft cloth, do not turn off the power for a long time.
•  Other routine maintenance of electronic products.

Common connection Troubleshooting:

• Make sure the power is turned on and the battery is sufficient.
•  Make sure that the keyboard is within the range of working distance.
• Make sure that the Wireless related function of the device has been opened.*
• Make sure that the keyboard and the device have been paired.
•  Clear device pairing record and turn off Wireless function; rematch.
• Please do not connect multiple Bluetooth keyboards at the same time; if necessary, please connect one by one.
• This product will not be updated in time for continuous product improvement. If there is any discrepancy, please refer to physical products.

This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

NOTE:   This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning:   Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>