chicco 08079765510000 Soft Carrycot Jet Black Instruction Manual

: June 4, 2024
: chicco

Table of Contents

chicco 08079765510000 Soft Carrycot Jet Black
WARNINGS
TIPS FOR CLEANING AND MAINTENANCE
CLEANING
WASHING
COMPONENTS
FIRST ASSEMBLY OF THE CARRYCOT
CLOSING THE CARRYCOT
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

chicco 08079765510000 Soft Carrycot Jet Black

chicco-08079765510000-Soft-Carrycot-Jet-Black-product

IMPORTANT
READ THE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THEM FOR FUTURE REFER- ENCE.

WARNING:
KEEP THIS PLASTIC COV-ER AWAY FROM CHILDREN TO AVOID SUFFOCATION.

WARNINGS

WARNING : Never leave the child unattended.
WARNING : This product is only suitable for a child who cannot sit up unaided. Maximum weight of the child: 9 kg.
Indicative age range: 0 – 5/6 months.
WARNING : Only use on a firm, horizontal level, and dry surface.
WARNING : Do not leave flexible carrying handles inside the carrycot.
WARNING : Do not use if any part of the carrycot is broken, torn, or missing.
WARNING : Do not leave flexible carrying handles inside the carrycot.
WARNING : Never use this product on a stand.
WARNING : Do not use the carrycot to transport your child in the car.
WARNING : Do not add another mattress on top of the mattress supplied or recommended by the manufacturer.
WARNING : This carrycot can only be used on the following CHICCO strollers: MINIMO, MIINIMO2, MIINI-MO3, GOODY.
WARNING : The carrycot must be fitted on the stroller only in the position facing the parent.
Only use spare parts supplied or approved by the manufacturer.
Always be aware of the risk of open fires and other sources of heat, such as electric stoves, gas stoves, etc. Never leave the carrycot in the vicinity of these heat sources.
Check regularly the handles and bottom of the carrycot in order to notice any possible damage or wear and tear. In particular, the handles and the bottom of the carrycot. Should any damage or signs of wear and tear be noticeable, do not use the product and keep it out of reach of children.
Before assembly, ensure that the product and its components have not been damaged during trans-portation. In this case, do not use it and keep it out of reach of children.
Do not attach any accessories to the product that have not been supplied by the manufacturer. Any unauthorized modifications made to the product will relieve the manufacturer of all responsibility.
Do not leave anything inside the carrycot that might reduce its depth.
Ensure that the carrycot is attached properly to the stroller before placing your child inside.
Products exposed to direct sunlight will heat up; let them cool down before placing your child inside.
The carrycot is not designed for children to sleep in for long periods of time: this product is not a substitute for a cot.
It is recommended that the carrycot be aired out after prolonged use.
I n the carrycot, your child’s head must never be lower than their body.
Keep the carrycot out of reach of children when it is not in use.

TIPS FOR CLEANING AND MAINTENANCE

This product requires periodical maintenance. Cleaning and mainte-nance operations must be performed exclusively by an adult. Do not submerge the carrycot in water. Do not leave the product exposed to the sun for a long period of time; the fabrics may discolor. Do not use solvents or abrasive products for cleaning.

CLEANING

Periodically wipe the plastic parts clean with a soft damp cloth. To prevent the formation of rust, always dry metal parts if they have come into contact with water.

WASHING

The cover of the carrycot, its sun-blind, and hood are not detachable: clean the fabric parts using a wet sponge and neutral soap. The cover of the mattress is detachable and washable: gently remove the cover and strictly follow the washing instructions on the label attached to the top.

The washing symbols and relative meanings are indicated below:

Hand wash
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean

COMPONENTS

Carrycot
Mattress
Hoods
Sunblind
4 plastic parts

FIRST ASSEMBLY OF THE CARRYCOT

Place the carrycot on a flat surface and, on the long side, insert the plastic part in the appropriate side pocket and close the zipper (Fig.1-1A). Repeat this operation on the other side as well.
Insert the two smaller plastic parts into the two pockets at the ends of the carrycot. Insert the plastic component laterally in the head area and close the zipper (Fig. 2–2A); on the opposite side, corresponding to the child’s feet area, insert the plastic component from below (Fig. 2B-2C), and close the zipper.
Place the mattress on the base of the carrycot (Fig. 3). WARNING: The higher side of the mattress must always be positioned where the child’s head is.
Using the all-around zipper, attach the sunblind to the carrycot (Fig. 4).
Fasten the hood to the all-round zipper according to the indications in figure 5; then attach the fabric flap of the hood to the velcro fasteners on the edge of the carrycot (Fig. 5A). Complete the opera-tion by hooking the snap buttons on the sides of the hood (Fig. 5B).
USING THE CARRYCOT AS A PRAM
This carrycot can be used as a pram version mounted on the following CHICCO strollers: MIINIMO, MIINIMO2, MIINIMO3, GOODY.
CARRYCOT MOUNTING AND REMOVAL FROM THE STROLLER
MIINIMO
To attach the carrycot to the stroller, first, remove the bumper bar, then close the hood and completely lower the backrest, and place the leg-rest horizontally, as shown in the stroller instructions.
Turn the rod under the carrycot base until it is completely open (Fig. 6- 6A); hold the textile handles in the transport position and place the carrycot on the stroller with the foot area facing the handle of the stroller (Fig. 6B).
Fasten the carrycot to the stroller’s frame using the appropriate belts. The carrycot has two belts with a buckle on each side. Wrap the belts around the stroller bar in the positions shown in figure 7, fasten the buckles (Fig. 7A), pull the belts to ensure a secure attachment (Fig. 7B), and close the second safety lock (Fig. 7C). Repeat the operations on the opposite side as well. CARRYCOT MOUNTING AND REMOVAL FROM THE STROLLER
GOODY
To attach the carrycot to the stroller, first, remove the bumper bar, then close the hood and completely lower the backrest, and place the leg-rest horizontally, as shown in the stroller instructions.
Turn the rod under the carrycot base until it is completely open (Fig. 8- 8A); hold the textile handles in the transport position and place the carrycot on the stroller with the foot area facing the handle of the stroller (Fig. 8B).
Fasten the carrycot to the stroller’s frame using the appropriate belts. The carrycot has two belts with a buckle on each side. Wrap the belts around the stroller bar in the positions shown in figure 9, fasten the buckles (Fig. 9A), pull the belts to ensure a secure attachment (Fig. 9B) and close the second safety lock (Fig. 9C). Repeat the operations on the opposite side as well.

WARNING:

Before use, make sure that the carrycot is properly attached by pulling it upwards.
To remove the carrycot from the stroller, release the buckles and remove it from the seat.
WARNING: The fastening and releasing operations can be carried out also with your child inside the carrycot; however, these operations may be more difficult to execute due to the child’s weight. Pay attention when carrying out the aforementioned operations.
WARNING: Before placing the carrycot on a stable and flat surface, the rod under the base of the carrycot must be turned up to the horizontal position (Fig. 10-10A). Never place the carrycot with the metal rod lifted.

CLOSING THE CARRYCOT

It is possible to reduce the dimensions of the carrycot when it is not being used. Remove the plastic inserts inside the carrycot performing, in reverse order, the operations described in the chapter “FIRST ASSEMBLY OF THE CARRYCOT”.

WARNING:
These operations must be carried out without the child in the carrycot or other children in the vicinity.

WARRANTY

The product is guaranteed against any conformity defect in normal conditions of use as stated in the instructions. Therefore, the warranty does not apply in the case of damage caused by improper use, wear, or accidental events. For the duration of the warranty on conformity defects, please refer to the specific provisions of national laws applicable in the country of purchase.

ARTSANA UK Ltd.
2nd Floor 1 Imperial Place Maxwell Road Borehamwood Hertfordshire – WD6 1JN 01623 750870 (office hours) www.CHICCO.uk.com. ARTSANA S.p.A. – Via Saldarini Catelli, 1 – 22070 Grandate (CO) – Italy Tel. (+39) 031 382 111 – Fax (+39) 031 382 400 – www.chicco.com.