SOAR BINEX True Wireless Earbuds User Manual
- June 16, 2024
- Soar
Table of Contents
SOAR BINEX True Wireless Earbuds
Product Information
Specifications
- FCC ID: 2AZSY-SR-BX
- Compliance: Part 15 of the FCC Rules
- Interference: This device may not cause harmful interference and must accept any interference received
- Radiation Exposure: The device meets general RF exposure requirements and can be used in portable exposure condition without restriction
Product Usage Instructions
Installation
- Ensure that the device is placed in an appropriate location with sufficient ventilation to prevent overheating.
- Connect the device to a power outlet using the provided power cord.
- If applicable, connect any external antennas or peripherals to their respective ports.
Interference Troubleshooting
If the device causes interference to radio or television reception, please
follow these measures to correct the interference:
- Reorient or relocate the receiving antenna to improve signal reception.
- Increase the separation between the device and the receiver to reduce interference.
- Connect the device to an outlet on a different circuit than the receiver.
- If the interference persists, consult the dealer or an experienced radio/TV technician for further assistance.
Frequently Asked Questions (FAQ)
Q: What is the FCC ID for this device?
A: The FCC ID for this device is 2AZSY-SR-BX.
Q: What are the compliance requirements for this device?
A: This device complies with Part 15 of the FCC Rules.
Q: Can the device cause harmful interference?
A: No, the device is designed not to cause harmful interference.
It must also accept any interference received.
Q: Can I use the device in a portable exposure condition?
A: Yes, the device has been evaluated to meet general RF exposure
requirements and can be used in portable exposure condition without
restriction.
Safety
-
Keep it away from children:this product is not a toy.
-
Do not throw this product to avoid any damage.
-
Do not disassemble,repair or reform this product.
-
Do not clean this product with any chemical solvents.
-
For charging, please use a charger with DC 5V input.
-
Keep or use this product at normal temperature
Do not throw it away or expose it to temperature above 60°C or fre to avoid any danger. -
Clean only with dry cloth.
-
Dispose the device properly at the end of its life cycle.
Package
- TWS earbuds with charging case x1
- Type-C charging cable x1
- 3. User manual x1
Product Specifications
- Bluetooth version: V5.3
- Wireless Distance: up to 30 feet
- Frequency Response: 20 Hz – 20 kHz
- Battery (earbuds and case): 30 mAh /200 mAh
- Charging time: 1-1.5 hours
- Playing time: about 6 hours
- Stanby time: 100 days
Power on / Power off
Power off:
Take the earbuds out of the charging case, the earbuds power on automatically
and pairing until blue and red light flashing alternately.
Power off
Put the earbuds into the charging case, the earbuds power off and disconnect
automatically.
Bluetooth pairing mode
After power on the earbuds, turn on the bluetooth on your device and search
for bluetooth pairing name “SR-BX” to connect.
Earbuds Touch & Function
Charge the Earbuds
- You need to charge your device for 10 minutes before using it for the first time or after a long period of absence.
- When the battery of the earbuds is low, it will have a low battery sound to remind to charge.
- Put the earbuds into the charging case, the earbuds will be charged automatically.
- The red LED keep turned on while charging and turn off while fully charged.
Charge the Charging case
Use a type-c cable (DC 5V 1A) for charging, when charging the led display
flashes, and the led display off after fully charged.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.
FCC ID: 2AZSY-SR-BX
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Warning Statement
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>