Jabra Evolve2 65 USB UC Mono Charging Stand Black Instructions
- June 16, 2024
- Jabra
Table of Contents
Jabra Evolve2 65 USB UC Mono Charging Stand Black
Product Information
Specifications
- Product Name: Jabra Evolve2 65 – USB-A UC Mono with Charging Stand – Black
- Compatibility: Requires Jabra Direct – the latest version
- Support Page: Jabra Evolve2 65 Support Page
Product Usage Instructions
Installing Jabra Direct
- Ensure that your computer meets the system requirements for Jabra Direct.
- Download the latest version of Jabra Direct from the official Jabra website.
- Follow the on-screen instructions to install Jabra Direct on your computer.
Connecting the Jabra Evolve2 65 Headset
- Connect the USB-A cable of the headset to an available USB port on your computer.
- Place the headset on the charging stand to ensure it is charged and ready for use.
Configuring Jabra Evolve2 65 with Jabra Direct
- Launch the Jabra Direct application on your computer.
- Follow the on-screen instructions to pair and configure your Jabra Evolve2 65 headset with Jabra Direct.
- Ensure that the headset is properly recognized and connected in the Jabra Direct interface.
Using the Jabra Evolve2 65 Headset
- Put on the headset and adjust it for a comfortable fit.
- Use the volume buttons on the headset to adjust the audio level.
- Press the multifunction button on the headset to answer or end calls.
- Refer to the user manual for additional features and controls.
Frequently Asked Questions (FAQ)
Q: What are the system requirements for Jabra Direct?
A: The system requirements for Jabra Direct can be found on the official
Jabra website under the support section for Jabra Evolve265.
Q: How do I ensure that my Jabra Evolve2 65 headset is properly
connected?
A: Make sure that you have installed Jabra Direct and followed the pairing
instructions provided in the user manual. If the issue persists, refer to the
troubleshooting section on the Jabra support page.
Jabra Evolve2 65 – USB-A UC Mono with Charging Stand – Black
When I speak into the microphone, I hear my voice not or hear it too loudly. How can I change the sidetone level? Setting up Jabra Direct?
- Requirements
Jabra Direct – current version
Use the following steps to adjust the sidetone level to suit you to hear your
voice or to reduce the volume.
- In Jabra Direct, select your device.
- Click Device.
- Under Device settings, make sure > Headset (Headset) that the Sidetone setting (Sidetone) is switched on.
- In the Sidetone level, choose your preferred one Setting off. The default setting is 0 dB (nominal). Select +3 dB or +6 dB to make your voice louder. With the opposite settings, you will hear your voice less loudly.
- Click Apply.
- With a test call, you can check whether the sidetone setting for She is satisfactory. Otherwise, repeat the previous Steps.
Notice
Illustrations and texts are for illustration purposes only. Applicable
Illustrations and texts may vary depending on the connected device and vary
depending on the update status of the software.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>