UltraLux LM6DCCTMR16 LED Dimmable Downlight Instruction Manual
- June 16, 2024
- ULTRALUX
Table of Contents
LM6DCCTMR16 LED Dimmable Downlight
Instruction Manual
LM6DCCTMR16 LED Dimmable Downlight
INSTRUCTIONS FOR EXPLOITATION
LED DIMMABLE DOWN LIGHT WITH
COLOUR TEMPERATURE SELECTION
MODEL: LM6DCCTMR16
i 
INSTRUCTIONS FOR EXPLOITATION
TECHNICAL INFORMATION
Supply voltage:………………………. 220-240 V AC
Power:……………………………………… 6W
Nominal luminous flux:…………………. 550 Im
Color temperature:…………………………. 3000K/4000K/6500K
Beam angle:…………………………………. 60°
Dimming range:………………………..0% =:100% (depending on the dimmer used)
Power factor:……………………………… PF ≥0.8
Color rendering index.:…………………………. CRI≥80
IP rate:………………………………………………………….. IP44
Dimensions:………………………………………………. Φ80/25 mm
Working temperature:………………………………………………………..-10°÷+ 44°C
Warranty:………………………………………………………………………. 2 years:
IMPORTANT;
READ THE INSTRUCTIONS BEFORE INSTALLATION OR REPLACEMENT!
- Performing any actions while electric voltage is applied carries a potential risk of electric shock.
- The power supply must be disconnected before starting any work.
- The module should be connected to a power supply of a proper electrical installation, meeting the requirements of a qualified specialist.
- The module installation should be carried out in accordance with the provided diagram.
- The module may heat up during operation, so please wait for it to cool down before replacement.
- Clean with a dry cloth.
- Do not cover the module. To avoid the risk of fire, ensure free access of air to the heating elements.
- If the power cable of the module is damaged, it must be replaced by the manufacturer, its authorized representative, or a technically qualified specialist to prevent accidents and damage.
- Before turning on the luminaire, make sure that its installation has been done correctly, eliminating the risk of malfunction, hazards to the environment, and users.
- The importer (supplier) is not responsible for damages resulting from failure to follow the above installation recommendations.
TAKING CARE OF THE NATURAL ENVIRONMENT CLEANLINESS
- The product and its components are not harmful to the environment.
- Please dispose the package elements separately in containers for the corresponding material.
- Please dispose the broken product separately in containers for out of usage electrical equipment.
DESCRIPTION
The dimming module is an LED light source that contains two types of LED chips placed in a common housing. A switch located on the back of the module is used to select which LEDs to operate. Therefore, the user can choose from three types of lighting: warm (3000 K), neutral (4000 K), and cool (6500 K). The module is equipped with a TRIAC dimming driver, allowing the user to adjust the intensity of the emitted light. The dimming of the LED module can be accomplished with most TRIAC dimmers for RC loads available on the market.
https://www.ultralux.bg/downloads/upotreba/Instruction-LM6DCCTMR16-web.pdf
WIRING DIAGRAM
INSTALLATION
NOTES
- The selection of the color temperature is done by the switch located on the back of the module, always with the power supply turned off.
- When connecting many modules, do not exceed the nominal power of the dimmer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>