ITC USBSM-AC-BK Surface Mount USB Installation Guide
- June 16, 2024
- ITC
Table of Contents
ITC USBSM-AC-BK Surface Mount USB
PARTS/TOOLS NEEDED
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
INSTALLATION INSTRUCTIONS
- Determine the installation location for your charger and mark the location of the holes needed. Center the wire exit hole between two screw holes.
- Pre-drill a 1/4” hole for the wires.1 Pre-Drill two 1/8” holes 2 for your mounting screws.
- Use the screws to attach the charger housing to the desired location.
- Wire the charger following the wiring diagram below.
3030 Corporate Grove Dr. Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return- policy DOC #: 710-00220
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>