Tizwis CL-V11 60 LED Phone Light User Manual

Tizwis CL-V11 60 LED Phone Light

Preface
Thank you for purchasing our products!
This is an ultra-thin fill light, which is compact and convenient to use. This product can be used for fill light in mobile phones and laptops, with a variety of color temperature/brightness adjustable, The Built-in 3000mAh battery can provide about 2 hours of continuous lighting.
*Please read this manual carefully before use, and keep it for future reference after reading.

Matters needing attention

1. This fill light does not have waterproof and dustproof functions.
2. Do not let this fill light be strongly impacted.
3. Do not look directly at the light-emitting surface of the fill lamp in use for a long time in a static distance, or it may damage your vision.
4. After charging, unplug the power cord.
5. After this product apron, otherwise is tay the to no power and unable to stard before
6. In order to extend the service life of the battery, it is recommended to charge and maintain it every three months.
7. This product has a built-in rechargeable lithium battery, which has a certain life limit. After a certain period of use, the performance will be reduced, which is a normal phenomenon.

Product introduction

1. Luminous surface
2. Type-c charging port
3. Micro-usb charging port
4. Value decrease button
5. Value increase button
6. Power/mode switch
7. Retaining clip 1
8. Angle adjustment knob
9. Indicator/display
10. Retaining clip 2
11. Fixed knob
12. 1/4 screw hole
13. Parameter switching

Product installation

Fixing clip 1
It is fixed through 1/4 screw hole and can be fixed by screwing the knob. (Compatible with other accessories linked by 1/4 screw)

Fixing clip 2

1. First install the single leg of the fixing clip into the slot on the back of the fill lamp
2. Then push the fixing clip towards the direction of both feet until the two feet of the fixing clip are also installed in the slot of the fill lamp
3. Screw out the mobile phone mounting base of fixing clip 2
4. Place the mobile phone in the direction as shown in the figure

Function and display

CL-V11

• ON/OFF
  Press and hold the power button for 3 seconds, and the fill light will turn on. Press and hold the power button again for 3 seconds to turn off the light.

• Parameter settings
  Briefly press the “M” button to Toggle color temperature/brightness options.Use the “+”/”-” buttons to adjust the parameter values.
  

• Charge
  When using Type-c or Micro-USB interface to charge, the battery indicator will flash in flowing water, When the indicator is no longer flashing, it means that the charging is completed.

CL-V11SE

• ON/OFF
  Press and hold the power button for 3 seconds, and the fill light will turn on. The default is white light mode. Press and hold the power button again for 3 seconds to turn off the light.

• Mode switching
  Briefly press the power button to switch between warm light, cold light and white light,

• Brightness adjustment
  In any mode, use the “+”/”-” keys to adjust the brightness, which can be adjusted by 10 levels.

• Charge
  When using the Type-c or Micro-ust interface to charge, the battery flashing, it means inflating arguing is completed, ator is no longer

CL-V11R

• ON/OFF
  Pren on. Press and hold the power bus and in for the dight will to turn off the light.

• Mode switching
  Special Perfect, and there button sare stitches, CCT/HSV/

• Parameter adjustment
  parameters, and else the theys hadith be parameter values

• Special effect mode
  Support 24 kinds of special effects.

• Charge
  When using Type-c or Micro-usb interface to charge, the battery is inasiant, in means that the toning arguing complex indicator is no longer

Specifications

distance

| 0.3 m| 900| 1200| 1000
0.5 m| 350| 500| 400
CRI| ≥95
TLCI| ≥97
Battery| 3.7 V 3000mA h（11.1W h）
Power| 5 W
Duration| About 1.5 hours
Input| 5V/1A
Charging port| Type- C/Micro-usb
Fixed interface| 1/4 screw hole, retaining clip 1, retaining clip 2
Size| 1047511.8mm
Weight| About 140 g
Accessories| LEDlight1, Type-C charging cable1,
fixing clip 1, fixing clip 2

The specifications and parameters of this product are tested in accordance with the company’s laboratory samples. The finished product may have some differences ,which will not affect the normal use; if the design and specifications changed will not prior notice

distance

| 0.3 m| 900| 1200| 1000
0.5 m| 350| 500| 400
CRI| ≥95
TLCI| ≥97
Battery| 3.7 V 3000mA h（11.1W h）
Power| 5 W
Duration| About 1.5 hours
Input| 5V/1A
Charging port| Type- C/Micro-usb
Fixed interface| 1/4 screw hole, retaining clip 1, retaining clip 2
Size| 1047511.8mm
Weight| About 140 g
Accessories| LEDlight1, Type-C charging cable1,
fixing clip 1, fixing clip 2

The specifications and parameters of this product are tested in accordance with the company’s laboratory samples. The finished product may have some differences ,which will not affect the normal use; if the design and specifications changed will not prior notice

fixing clip 1, fixing clip 2

The specifications and parameters of this product are tested by the company’s laboratory samples. The finished product may have some differences ,which will not affect normal use; if the design and specifications changed will not prior notice

FAQs

Q: Is the Tizwis CL-V11 60 water-resistant?

A: The user manual doesn't specify water resistance as a feature, so it's advisable to avoid exposing the Tizwis CL-V11 60 to water or moisture to prevent damage.

Q: Can the brightness of the Tizwis CL-V11 60 be adjusted?

A: Yes, the Tizwis CL-V11 60 offers adjustable brightness. You can change the light intensity using the control buttons on the cube, allowing for optimal lighting in various shooting conditions.

Q: How do I charge the Tizwis CL-V11 60?

A: To charge the Tizwis CL-V11 60, connect the included USB cable to the light's charging port and an appropriate power source. The LED indicator will show the charging status.

Q: What is the Tizwis CL-V11 60 LED Phone Light and what are its primary features?

A: The Tizwis CL-V11 60 is a compact LED cube light designed for mobile phones, featuring 60 high-brightness LEDs. It's ideal for improving photo and video quality in low-light conditions. Key features include adjustable brightness, a rechargeable battery, multiple color filters, and a universal mount compatible with most smartphones.

Q: Are there any accessories included with the Tizwis CL-V11 60?

A: The Tizwis CL-V11 60 typically comes with color filters and a USB charging cable. Check the product packaging for a complete list of included accessories.

Q: Does the Tizwis CL-V11 60 come with a warranty?

A: The details of the warranty for the Tizwis CL-V11 60 should be outlined in the user manual. Generally, such products come with a limited warranty covering manufacturing defects.

Q: Can the Tizwis CL-V11 60 be used with all types of smartphones?

A: The Tizwis CL-V11 60 is designed with a universal mount, making it compatible with most smartphones, regardless of the make or model.

Q: How long does the battery last on the Tizwis CL-V11 60?

A: The battery life depends on the brightness level used, but on a full charge, the Tizwis CL-V11 60 typically lasts for several hours of continuous use.

Q: How do I know when the Tizwis CL-V11 60 is fully charged?

A: The LED indicator on the Tizwis CL-V11 60 will typically change color or turn off when the device is fully charged, as detailed in the user manual.

Q: Can the Tizwis CL-V11 60 be used for professional photography?

A: While primarily designed for mobile phones, the Tizwis CL-V11 60's high- quality LED lighting makes it suitable for amateur and semi-professional photography as well.

Q: How do I attach the Tizwis CL-V11 60 to my phone?

A: Attach the Tizwis CL-V11 60 to your phone using the universal mount. Secure it in a position that enhances your camera's lighting without obstructing the lens.

Download This Manual PDF:Tizwis CL-V11 60 LED Phone Light User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>