CRUTCHFIELD 724E3BLKJ E3 Closed Back Headphones Instruction Manual
- June 16, 2024
- CRUTCHFIELD
Table of Contents
CRUTCHFIELD 724E3BLKJ E3 Closed Back Headphones Instruction Manual
Product Information
Specifications
- Product Name: Metal Jacket Headphones
- Warranty: 2-year warranty
- Address: 3366 Kurtz St Suite 200, San Diego, CA 92110
- Contact: +1(619) 501-6313
Features
- High-quality sound
- Durable metal jacket design
- Comfortable headband
- Includes headphone cable and accessories
- Driver: 45 mm x 71 mm Dan Clark Audio designed
- THO less than 0.02% measured 1 kHz@94dB single-ended planar magnetic
- Titanium “Memory Metal” headband
- Japanese synthetic protein leather
- Auto-adjusting suspended comfort strap
- RMS Deviation of .25 dB from 20 Hz – 1 O kHz
Safety Instructions
Please read the following safety instructions before using the Metal Jacket Headphones:
- Do not dismantle the unit.
- Avoid dropping the headphones to prevent damage.
- Keep the headphones away from water or other liquids.
- Avoid exposing the headphones to extreme temperatures.
Attaching a Cable
To attach a cable to the Metal Jacket Headphones, follow these steps:
- Locate the cable input on the headphones.
- Insert the cable firmly into the input until it clicks into place.
- All Dan Clark Audio planar-magnetic products use push-pull self-latching connectors.
- To attach your cable, hold the male connector by the boot and push it into the headphone jack while rotating until the connector keys in and clicks in place.
- To release the cable, pull down on the top of the connector’s metal jacket.
Product Care
To ensure the longevity of your Metal Jacket Headphones, follow these care instructions:
- The synthetic protein leather ear pads may be cleaned gently with a moistened cloth. Do not use cleaners or protectants, this may damage the pad.
- Clean any other surfaces with a clean, dry and lint-free microfiber cloth.
- For the first 50-100 hours of use the headphone will ‘burn-in: during this time the sound signature will stabilize.
Storing the Headphones
To store the headphones properly, follow these steps:
- Grip firmly around both sides of the headphone with one hand as shown.
- Grasp the headphone headband wire with your other hand.
- Push down on the headband wire while firmly holding both sides of the headphone with the other hand. This will cause the headphone to fold in a controlled manner.
- Place the headphones into the case as shown.
Note: Do not fold cups one at a time, as this will result in damage to the headphones.
Warranty
Dan Clark Audio offers a 2-year warranty for the Metal Jacket Headphones. The warranty commences on the date of purchase and covers the headphone cable and accessories. The warranty is transferable provided there is documentation of the original purchase that confirms the purchaser bought the headphones in their country of residence. The warranty is void and non-transferable for Gray Market headphones (e.g. international customers purchasing from US resellers and shipping to a friend or freight-forward for export to any country without an authorized reseller). The warranty does not cover damage caused by the owner (such as dismantling the unit, dropping, or damage by failure of electronics) or naturally occurring wear to ear pads. Acts of God and other usual caveats apply, reinforcing that a warranty issue is only valid if there was something intrinsically wrong with the product received from our suppliers or if Dan Clark Audio made an error. We will repair or replace defective goods at our discretion.
Registration
To register your Metal Jacket Headphones, visit https://DanClarkAudio.com/register.
3366 Kurtz St
Suite 200
San Diego, CA 92110
+ 1 ( 6 1 9) 501 -631 3
FAQ
1. How long is the warranty for the Metal Jacket Headphones?
The Metal Jacket Headphones come with a 2-year warranty.
2. What does the warranty cover?
The warranty covers the headphone cable and accessories.
3. Can I transfer the warranty to someone else?
Yes, the warranty is transferable as long as there is documentation of the
original purchase confirming that the headphones were bought in the
purchaser’s country of residence.
4. What is not covered by the warranty?
The warranty does not cover damage caused by the owner, such as dismantling
the unit, dropping, or damage by failure of electronics. It also does not
cover naturally occurring wear to ear pads.
5. How can I register my Metal Jacket Headphones?
To register your Metal Jacket Headphones, visit
https://DanClarkAudio.com/register.
6. How can I contact Dan Clark Audio for support?
You can contact Dan Clark Audio at +1(619) 501-6313 or visit their address at
3366 Kurtz St Suite 200, San Diego, CA 92110.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>