QAZQA 92386 IM Paper Vertical Pendant Lamp Instruction Manual

QAZQA 92386 IM Paper Vertical Pendant Lamp

Product Information

Specifications

• Input: AC220-240V~50Hz
• IP Rating: IP20
• Model: Sydney HL 6 92386/96007/99131
• Overall Sizes: [Please refer to the user manual for specific dimensions]
• Manufacturer: FittinQ B.V.
• Address: Smaragdweg 52, 5527 LB Hapert, The Netherlands
• Website: www.qazqa.nl
• Distributor: FittinQ LTD
• Address: 55 Baker Street, London, W1U 7EU United Kingdom

Product Usage Instructions:

Installation
Before installation, ensure the power supply is switched off. Follow the steps below for proper installation:

1. Select a suitable location for the product.
2. Mount the product securely using appropriate screws or brackets.
3. Connect the product to the AC220-240V~50Hz power source.
4. If applicable, follow any additional installation instructions provided in the user manual.

Operation
To operate the product, follow these steps

1. Ensure the power supply is switched on.
2. Use the provided controls (buttons, switches, or remote) to adjust the settings according to your preferences.
3. Refer to the user manual for specific instructions on how to use different features or modes.

Maintenance
To keep the product in optimal condition, follow these maintenance guidelines:

• Regularly clean the product using a soft, dry cloth to remove dust and dirt.
• Avoid using harsh chemicals or abrasive materials that could damage the product’s surface.
• Check the power cord and connections periodically for any signs of damage. If damaged, contact a qualified technician for repair or replacement.
• Refer to the user manual for any specific maintenance instructions or recommended cleaning products.

Frequently Asked Questions (FAQ)

• Q: What is the input voltage and frequency for this product?
  A: The input voltage for this product is AC220-240V~ with a frequency of 50Hz.

• Q: What is the IP rating of this product?
  A: This product has an IP20 rating, indicating it is protected against solid objects larger than 12mm and does not provide protection against water.

• Q: Where can I find the specific dimensions of this product?
  A: Please refer to the user manual for detailed information on the overall sizes of this product.

• Q: How can I contact the manufacturer or distributor for further assistance?
  A: You can contact the manufacturer, FittinQ B.V., at Smaragdweg 52, 5527 LB Hapert, The Netherlands. Visit their website at www.qazqa.nl. Alternatively, you can reach out to the distributor, FittinQ LTD, at 55 Baker Street, London, W1U 7EU United Kingdom.

INSTRUCTION MANUAL

Safety Precautions

Sydney HL 6
92386/96007/99131

Assembly

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
9. Take account of all available technical information.
10. Meaning of symbols:
    • This icon indicates the level of water-proof and dust-proof
    • Protection Class I: the fitting must be earthed
    • Protection Class II: the fitting is doubled insulated and does not require earthing
    • Protection Class III: the fitting is low voltage
    • Minimum distance from lighted objects (meters)
    • The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
    • The armature is designed to work only with the indicated voltage. Different items require different working voltage.
    • The luminaire can be used in combination with a dimmer
    • The luminaire can be dimmed by wall switch
    • The reference light angle and light space of the luminaire Tubbismini, baynot be is bring restagit arend doesic i waste in standard
11. Take note of the symbols when connecting wires:

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl

FittinQ LTD
55 Baker Street,
London, W1U 7EU
United Kingdom

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>