PHILIPS HR7962 Kitchen Robot User Manual

: June 16, 2024
: Philips

Table of Contents

PHILIPS HR7962 Kitchen Robot
Product Information
Product Usage Instructions
FAQ
Recycling
Overview
Before first use
Using your kitchen machine
Cleaning
Guarantee and service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PHILIPS HR7962 Kitchen Robot

Product Information

Specifications

Model: HR7962
Noise level: Lc = 85 dB [A]

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

Recycling

Do not throw away the product with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.
Follow your country’s rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.

Kitchen machine

i – Dough hook
j – Whisk
k – Beater
l – Blender (optional)
m – Meat mincer (optional)
n – Mill (optional)

Before First Use

Before you use the kitchen machine and accessories for the first time, thoroughly clean the parts that come into contact with food.
You can only plug in and switch on the appliance after correctly assembling the accessories. Refer to Fig. 2 for the proper assembly.

Auto Stop

Your kitchen machine will be automatically turned off after 15 minutes of continuous operation. This can avoid potential safety problems due to prolonged usage.

Overload Protection

Your kitchen machine will also automatically stop working when overloaded. To reset the appliance in case of overload and auto-stop protection, follow the steps below:

Turn the knob to 0 position and then unplug it.
Remove some of the ingredients to reduce the load.
Allow the appliance to cool down for a few minutes.
Connect the power plug to the power supply and reselect the desired speed.

Product Usage Instructions

Using your kitchen machine
Mixing bowl tools

Note: Before you start, make sure that you pick the desired attachment from the following and assemble it according to Fig. 2.

Name	Purpose
Dough hook
Beater
Whisk

Clean the motor unit with a moist cloth.
Clean the other parts in hot water.
Store the appliance and accessories in a dry place after cleaning.

Guarantee and Service

If you have a problem, need service, or need information, see www.philips.com/support or contact the Philips Consumer Care Center in your country. The phone number is in the worldwide guarantee leaflet. If there is no Consumer Care Center in your country, go to your local Philips dealer.

FAQ

Q: Is the NutriU App available in all countries?
A: The NutriU App may not be available in your country. In this case, please access your local Philips website for inspiration.
Q: How should I clean the parts of the kitchen machine?
A: Clean the motor unit with a moist cloth and clean the other parts in hot water. Avoid cleaning with a dishwashing machine or moist cloth.

Welcome
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Read this user manual carefully before you use the appliance and save it for future reference. For more inspiration, recipes and information about the product, visit www.philips.com/welcome or download the free NutriU App* for IOS® or Android™.

The NutriU App may not be available in your country. In this case, please access your local Philips website for inspiration.

Warning

Do not immerse the motor unit in water nor rinse it under the tap.
Before you connect the appliance to the power, make sure that the voltage indicated on the bottom of the appliance corresponds to the local power voltage.
Do not use the appliance if the power cord, the plug, the protecting cover, the rotating sieve or any other parts are damaged or have visible cracks.
If the power cord is damaged, you must have it replaced by Philips, a service center authorized by Philips, or similarly qualified persons to avoid a hazard.
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
Never let the appliance run unattended.
Remove the beater, whisk or dough hook from your kitchen machine before washing tools.
If the bowl tools get stuck, unplug the appliance before you remove the ingredients that block the bowl tools.
If food sticks to the wall of the mixing bowl, switch off the appliance and then use a spatula (not provided) to remove the food from the wall.
Never stick or use your fingers or an object (for example, a spatula) into the mixing bowl when using any of the tools while the appliance is running.
Be careful if hot liquid is poured into the bowl as it can be ejected out of the appliance due to a sudden steaming.
Never attach and use more than one tool or accessory on the kitchen machine at the same time.
This appliance is intended for household use only.
Be careful when handling the sharp cutting blades, emptying the bowl and cleaning.

Caution

Always switch off and unplug the appliance if it is left unattended, and before assembling, disassembling, cleaning and changing accessories, or approaching parts that move in use.
To avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
Always switch off the appliance by turning the knob to 0 position.
Always wait until the moving parts stop running after switching off, and then unplug the appliance before lifting the arm of the stand, or opening, disassembling or removing the parts of any of the accessories from the stand.
Follow the quantities, processing time and speed when using the kitchen machine tools, as indicated in the user manual. Follow the recipes as shown on the NutriU APP.
Thoroughly clean the parts that come into contact with food before you use the appliance for the first time. Refer to the instructions and table for cleaning given in the user manual.
Never use any accessories or parts from other manufacturers that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid.
Let hot ingredients cool down (< 80°C) before processing them.
Always let the appliance cool down to room temperature after each batch that you process. Noise level: Lc = 85 dB [A]

Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

Recycling

Do not throw away the product with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.
Follow your country’s rules for the separate collection of electrical and electronic products.
Correct disposal helps prevent negative consequences for the environment and human health.

Overview

Kitchen machine

Front cover (for meat mincer)
Tool connector
Splash guard
Bowl
Speed selector (Rotary knob)
Timer adjustment button
Arm release button
Back cover (for blender)
- Make sure the back cover is securely closed before using the appliance.
Dough hook
Whisk
Beater
Blender (optional)
Meat mincer (optional)
Mill (optional)

Before first use

Before you use the kitchen machine and accessories for the first time, thoroughly clean the parts that come into contact with food.
You can only plug in and switch on the appliance after correctly assembling the accessories. Refer to Fig. 2 for the proper assembly.

Auto stop
Your kitchen machine will be automatically turned off after 15 minutes of continuous operation. This can avoid potential safety problems due to prolonged usage.

Overload protection

Your kitchen machine will also automatically stop working when overloaded.
To reset the appliance in case of overload and auto-stop protection, follow the steps below:

Turn the knob to 0 positions and thenunplug it.
Remove some of the ingredients to reduce the load.
Allow the appliance to cool down for a few minutes.
Connect the power plug to the power supply and reselect the desired speed.

Using your kitchen machine

Mixing bowl tools
Note

Make sure the knob is at the 0 position before attaching the whisk, beater or dough hook.
Up to 1000 g of flour plus other ingredients can be processed in the bowl.
Follow the recommended quantities, processing time and speed as indicated in Fig. 4. Do not exceed the suggested processing speed to avoid damage to the machine.
Make sure the covers (for the blender and meat miner) on the arm are well-locked before using your kitchen machine.
Before you start, make sure that you pick the desired attachment from the following and assemble it according to Fig. 2.

Tip

To avoid splashing, always increase speed gradually.
Splash guard: fit the splash guard onto the stand before using the bowl tools.
Remove the splash guard before you lift the arm of the stand. You can add ingredients through the spout of the splash guard.
Whisking: before whisking egg whites or cream, make sure that the bowl and the whisk are dry and free from grease.
Kneading: use the dough hook to knead dough for bread and pizzas. You need to adjust the amount of liquid to form the dough according to the humidity and temperature conditions.
If you want to re-knead the dough with your kitchen machine, press the dough down to the bottom of the bowl to avoid the dough wrapping on the tool. Make sure that you re-knead the dough within the recommended speed.

Cleaning

Warning

Before you clean the appliance, unplug it.
Refer to the table (Fig. 3) for information on cleaning the parts with water, a dishwashing machine or a moist cloth.

Clean the motor unit with a moist cloth.
Clean the other parts in hot water (< 60°C) with some washing-up liquid or in a dishwasher.
Store the appliance and accessories in a dry place after cleaning.

Guarantee and service

If you have a problem, need service, or need information, see www.philips.com/support or contact the Philips Consumer Care Center in your country. The phone number is in the worldwide guarantee leaflet. If there is no Consumer Care Center in your country, go to your local Philips dealer.