QAZQA 105473 Flore HL Black Smoke Instruction Manual

: June 16, 2024
: QAZQA

Table of Contents

QAZQA 105473 Flore HL Black Smoke
Product Information
Product Usage Instructions
FAQ
Safety Precautions
INSTALLATION INSTRUCTION
SAFETY INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QAZQA 105473 Flore HL Black Smoke

Product Information

Specifications

Model: Flore HL Black Smoke 105473, Flore HL Gold Opal 105474
Overall Size: 120cm
Power: E27 Max.40W

Product Usage Instructions

Unboxing
When you receive the product, carefully unbox it and ensure that all the components are included:

The Flore HL pendant light fixture
Installation hardware (screws, brackets, etc.)
User manual and warranty card

Preparing for Installation
Before installation, make sure to follow these steps:

Turn off the power supply to the area where you will be installing the light fixture.
Ensure that the ceiling or mounting surface is strong enough to support the weight of the fixture.
Gather all the necessary tools for installation, including a ladder, screwdriver, and wire stripper.

Wiring and Installation

Follow these steps to wire and install the Flore HL pendant light:

Remove the existing light fixture, if any, by disconnecting the wires and removing the mounting bracket.
Identify the live, neutral, and ground wires in your electrical box.
Connect the corresponding wires from the pendant light fixture to the electrical box using wire nuts or connectors.
Secure the light fixture to the ceiling or mounting surface using the provided hardware.

Finalizing Installation

Once the fixture is securely installed, follow these steps:

Double-check all the wire connections to ensure they are secure.
Turn on the power supply and test the light fixture to ensure it is working properly.
Adjust the height of the pendant light by adjusting the length of the suspension cables if necessary.

FAQ

Q: What is the maximum wattage for the light bulb?
A: The Flore HL pendant light fixture supports a maximum wattage of 40W with an E27 base.

Q: How do I clean the pendant light?
A: To clean the pendant light, first, turn off the power supply. Use a soft cloth or duster to gently wipe away any dust or debris from the surface. Avoid using harsh chemicals or abrasive materials that may damage the finish.

Q: Can I use LED bulbs with this fixture?
A: Yes, you can use LED bulbs with the Flore HL pendant light as long as they are compatible with the E27 base and within the maximum wattage limit of 40W.

Safety Precautions

Flore HL Black Smoke 105473
Flore HL Gold Opal 105474

INSTALLATION INSTRUCTION

Overall size:

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference

The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
The electrical supply must be switched off at the outset, preferably through a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
Exterior lighting must not be installed during rain.
Take account of the minimal separation distance from other objects and the room required around the fitting.
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
Take account of all available technical information.
Meaning of symbols:
This luminaire cannot be disposed of together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste