Fxlpower FXL-9682 Solar Motion Sensor Light User Guide
- June 16, 2024
- Fxlpower
Table of Contents
Fxlpower FXL-9682 Solar Motion Sensor Light
Product Information
Specifications
- Solar Panel: 6.5V/3.5W
- Lithium battery: 3.7V/4400mA
- Output: 10W
- LED: SMD2835/6000K-6500K*108PCS
- Luminous flux: 1500 lumen
- Induction distance: 1-5M
- Remote distance: 1-5M
- Charging time: 6-8 hours
- Wire length: 5M
- Waterproof level: IP65
Product Usage Instructions
Charging the Solar Lamp
Before installation and use, please charge the solar lamp in the sun for 6-8 hours.
Brief Introduction
- The light is powered by solar energy, which is versatile and eco-friendly.
- Adopted multi-angle rotation design, solar panel, and light arms are adjustable.
- The light comes with a convenient remote control so that you can control it from a distance.
- The 16.5ft solar panel cable is long enough to reach high points for maximum sun exposure and charging, providing a more flexible and user-friendly operation.
- This solar light is suitable for various outdoor locations such as front doors, garages, gardens, barns, sheds, yards, patios, platforms, parks, porches, steps, fences, driveways, coops, farmhouses, and more.
ON/OFF Switch
The ON/OFF switch controls the power supply to the light.
Motion Sensor
The motion sensor detects movement and triggers the light to turn on.
Mode Switch
Each press of the mode switch will cycle to the next mode.
The different modes are:
-
Mode 1: Dim light sensor mode – The light stays on as dim light and gets brighter for 15 seconds when the sensor detects movement.
It returns to dim light after no further motion is detected (works only at night). -
Mode 2: Motion sensor mode – The light automatically turns on for 15 seconds when people or other living objects are detected within the sensing area. It turns off if no further movement is detected (works only at night).
-
Mode 3: Constant on mode – The light will automatically turn on and stay bright at night.
-
Mode 4: All-day motion sensor mode – The light automatically turns on for 15 seconds when people or other living objects are detected within the sensing area. It turns off if no further movement is detected (works both day and night).
-
Auto Mode: The light stays on all day and automatically switches to Mode 4 when the battery is at 50% power. It cycles the next day.
Infrared Remote Control
The infrared remote control allows you to control various functions of the light:
- Mode switch
- Brightness adjustment
- Setting the time to delay the light after sensing movement
Installation Steps
Follow these steps to install the solar panel and solar light:
-
1. **Install the solar panel:**- Choose a location where the solar panel can receive direct sunlight.
- Punch 2 suitable holes in the desired location.
- Insert the expansion pillar hinges.
- Install the bracket and tighten the screws.
- Adjust the angle of the solar panel for optimum sun exposure and increased conversion of solar energy.
- Installation of Solar Light:
* Drill 2 suitable holes where you want to install the light.
* Insert the expansion pillar hinges.
* Fix the fixed base to the wall using screws.
* Connect the bracket and solar light with screws and fix it on the fixed base.
* Adjust the up and down angle of the bracket and light.
3. **Connect the Cable:**Connect the wires from the solar panel to the solar light. Tighten the nuts to secure the connection.
Function Setting
The function setting allows you to customize the light’s behavior:
- Night Mode:
- Mode 1: Dim light sensor mode
- Mode 2: Motion sensor mode
- Mode 3: Constant on mode
- Day Mode (blocks the dusk to dawn sensor):
- Mode 4: All-day motion sensor mode
- Auto Mode: Stays light all day, automatically switches to Mode 4 when the battery reaches 50% power, and cycles the next day.
- Induction Lighting Delay Time Setting (Applicable to mode 1, mode 2, and mode 4):
- 25 seconds: The light stays on for 25 seconds after sensing movement.
Frequently Asked Questions (FAQ)
Q: How long does it take to charge the solar lamp?
- A: It takes 6-8 hours of charging in direct sunlight.
Q: Can I adjust the angle of the solar panel and light?
- A: Yes, both the solar panel and light arms are adjustable to optimize sun exposure.
Q: Is the remote control included?
- A: Yes, the light comes with a convenient remote control for easy operation.
Q: What is the waterproof level of the solar light?
- A: The solar light has an IP65 waterproof level.
Introduction of Usage
Use two AAA batteries, please distinguish between the positive and negative poles of the battery to install it correctly.
Installation Steps
- Install the solar panel
- Please Install the solar panel where it can get direct sunlight. punch 2 suitable holes in the desired location. insert the expansion pillar hinges.
- then install the bracket and tighten the screws. you can adjust the angle of the solar panel for optimum sun exposure and to increase the conversion of solar energy.
- Installation of Solar Light.
- Drill 2 suitable holes where you want to install, and insert the expansion pillar hinges.
- Fix the fixed base to the wall with screws.
- Connect the bracket and solar light with screws and fix it on the fixed base. you can adjust the up and down angle of the bracket and light.
- Connect the cable
- Connect the wires to the solar panel and solar light. Tighten the nuts.
The ideal installation height for solar lights is 8-13 feet.
- The solar panel can automatically detect changes in the brightness of the external environment. make the light turn on automatically at night and turn off automatically at sunrise.
- therefore, when you turn on the light during the day, the red indicator light is flashing, which means the solar light is charging, Mode1, 2, and 3 will not turn on the light; Mode4 and AUTO mode will turn on the light.
Attention
- As the light is solar-powered, it is connected closely to the weather, angle, and strength of sunlight.
- Recommended to install the lamp in direct sunlight from the south and use mode 2.
- Please keep the solar panel clean.
- If the battery lifetime is more than 5 years, do not put the battery in the fire to avoid an explosion.
Brief introduction
- The light is powered by solar energy, which is versatile and eco-friendly.
- Adopted multi-angle rotation design, solar panel, and light arms are adjustable.
- The light comes with a convenient remote control so that you can control it from a distance.
- The 16.5ft solar panel cable is long enough to reach high points for maximum sun exposure and charging, providing a more flexible and user-friendly operation.
- This solar light is suitable for your front door, garage, garden, barn, shed, yard, patio, platform, park, porch, step, fence, driveways, coop, farmhouse, etc.
Specification
- Solar Panel: 6.5V/3.5W
- Lithium battery : 3.7V/4400mA Output: 10W
- LED: SMD2835/6000K-6500K*108PCS Luminous flux: 1500 lumen
- Induction distance: 1-5M
- Remote distance: 1-5M
- Charging time: 6-8hours
- Wire length: 5M
- Waterproof level: IP65
Function Setting
Night Mode
- Mode 1 : Dim light sensor mode. Stay on as dim light, gets brighter for 15 when the sensor detects the movement of a person or animal. Back on dim light after no further motion is detected. (works only at night)
Mode 2 : Motion sensor mode. Auto on for 15 when people or other living objects are detected within the sensing area, and auto off if no further movement is detected (works only at night).
Mode 3: Constant on mode. The light will automatically turn on and stay bright at night.
Day Mode (2 modes would block the dusk to dawn sensor, then the light will function both day & night)
Mode 4 : All-day motion sensor mode. Auto on for 15 when people or other living objects are detected within the sensing area, and auto off if no further movement is detected (works both day & night).
Auto Mode: Stays light all day, automatically turning to Mode 4 when the battery is 50% power. And cycle the next day.
Induction lighting delay time setting
- (Applicable to mode1, mode2 and mode4)
- When sensing the movement of people, the light is turned on for 25 seconds.
- When sensing the movement of people, the light is turned on for 35 seconds.
- When sensing the movement of people, the light is turned on for 45 seconds.
- Before installation and use, please charge the solar lamp in the sun for 6-8 hours.
- Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>