THULE Kit 186191 Clamp kit User Manual
- June 16, 2024
- THULE
Table of Contents
THULE Kit 186191 Clamp kit
Product Information
Specifications
- Product Name: LOTUS Eletre
- Vehicle Type: 5-door SUV
- Kit Number: 186191
- Compatibility: Only for vehicles with flush railing
- Spare Part: 54201
- Max Load Capacity: 75 kg / 165 lbs
- Max Speed: 130 km/h (80 Mph) or 80 km/h (50 Mph) with additional load
Product Usage Instructions
Step 1: Preparing the Vehicle
- Ensure your vehicle has a flush railing.
- If necessary, clean the flush railing to remove any dirt or debris.
Step 2: Installing the Foot Pack
- Locate the Foot Pack (KIT) in the kit contents.
- Take out the required number of footpacks (based on your vehicle’s specifications).
- Follow the provided instructions (included in the kit) to
- securely install the Foot Pack on each flush railing.
- Tighten the screws using a torque wrench to a torque of 4 Nm.
Step 3: Attaching the Evo Edge
- Locate the Evo Edge in the kit contents.
- Position the Evo Edge on top of the installed Foot Packs.
- Ensure proper alignment and fit of the Evo Edge.
- Securely attach the Evo Edge to the Foot Packs following the provided instructions.
Step 4: Finalizing the Installation
- Double-check the tightness of all screws and attachments.
- Ensure the load capacity does not exceed the specified maximum (75 kg / 165 lbs).
- Verify that the installation does not obstruct any vehicle functionality or safety features.
Frequently Asked Questions (FAQ)
- Q: Can I use this kit on a vehicle without a flush railing?
- A: No, this kit is specifically designed for vehicles with flush railing only. Using it on other types of vehicles may result in improper fitment and potential safety hazards.
- Q: What is the maximum speed I can drive with this product installed?
- A: The maximum speed with this product installed is 130 km/h (80 Mph). However, if you have an additional load on the roof rack, the maximum speed is reduced to 80 km/h (50 Mph) to ensure safe driving conditions.
- Q: How do I clean the flush railing before installation?
- A: To clean the flush railing, use a mild detergent or car cleaning solution along with a soft cloth or sponge. Gently scrub the surface to remove any dirt or debris. Rinse thoroughly and dry before proceeding with the installation.
WHAT IS IN THE BOX
INFORMATION
INSTALLATION INSTRUCTION
CONTACT
- Thule Sweden AB, Borggatan 5 335 73 Hillerstorp, SWEDEN
- info@thule.com
- © Thule Group 2023. All rights reserved.
- www.thule.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>