THULE 145353 Clamp Kit Instruction Manual
- October 30, 2023
- THULE
Table of Contents
THULE 145353 Clamp Kit
Product Information
The product is a roof rack kit with a product code of 145353 designed for use with a MITSUBISHI Outlander, 5-door SUV, model year 22-/*23- in North America. The kit includes 1 foot pack, 2 Thule WingBar Evo bars with a maximum load capacity of 75 kg or 165 lbs, and instructions for installation. The kit also includes 4 locks to secure the roof rack to the vehicle. The product is compatible with Thule ProBar Evo, SlideBar Evo, and SquareBar Evo X and Y, as well as Thule WingBar Edge and WingBar.
The product dimensions are as follows:
- Thule WingBar Evo: 1031 mm / 40 5/8 inches (X) and 991 mm / 39 inches (Y)
- Thule WingBar Edge: scale X and scale Y
- Thule ProBar Evo: scale X and scale Y
- Thule SlideBar Evo: scale X and scale Y
- SquareBar Evo: 38C X (mm/inch), 34K Y (mm/inch), 700W (mm/inch), and 355Z (mm/inch)
The product is manufactured by Thule Sweden AB located at Borggatan 5, 335 73 Hillerstorp, Sweden. For more information, visit www.thule.com or call 5562936001.
Product Usage Instructions
Begin by checking that the roof of your MITSUBISHI Outlander
is clean and dry.
- Locate the four mounting points on the roof of the vehicle. The mounting points are located at the edges of the roof and are identified by the markings FL, FR, RL, and RR.
- Place the foot pack onto the mounting points of the vehicle, aligning the pack with the markings on the roof. Ensure that the pack is level and centered on the roof.
- Attach the Thule WingBar Evo bars to the foot pack by sliding them into place. The bars should click into place when properly attached.
- Adjust the position of the bars as necessary to ensure they are evenly spaced and centered on the roof.
- Use the provided locks to secure the roof rack to the vehicle. Ensure that all locks are properly engaged and tightened.
- Load your equipment onto the roof rack, ensuring that it does not exceed the maximum load capacity of 75 kg or 165 lbs.
- Before driving, check that all equipment is securely fastened to the roof rack and that there is no movement or rattling.
- When not in use, remove the equipment from the roof rack and store it in a safe place. If leaving the roof rack on the vehicle, remove the bars to reduce wind noise and drag.
BOX CONTENT
SAFETY INSTRUCTION
INSTALLATION INSTRUCTION
DIMENSION
ABOUT COMPANY
- Thule Sweden AB, Borggatan 5 335 73 Hillerstorp, SWEDEN
- [email protected]
- www.thule.com